Product Description
6mm Low Speed High Torque Small Gearbox With Gear Motor
Product Description
Specifications:
Rated Voltage: 3V
Model Number: ZWBPD006006-952
- Usage: Boat, Car, Electric Bicycle, Fan, Home Appliance, Mini digital, medical, intelligent mechanical, Smart Pen
- Certification: CCC, ROHS, TST16949, SGS
- Type: Gear Motor
- Construction: Permanent Magnet
- Commutation: Brush
- Protect Feature: Drip-proof
- Speed(RPM): 10-673rpm
- Continuous Current(A): 30~100mA
- Output Power: 0.01~0.2W
- Voltage(V): 0.2~6VDC
- Efficiency: IE 1
- Motor dia.: 6mm
- Gearbox dia.: 6mm
- Gear ratio: 5/6.5/23/30/41/110/148/198.4/266/531/744/952/1275/1707
- Total length: 12.1/14.5/16.9mm
- Shaft dia.: 2.0mm
- Material: Plastic
- Customized: Accepted
Model | Application Parameters | Rated Torque of Gear Box | Instant Torque of Gear Box | Gear Ratio | Gear Box Length L1 |
|||||||
Rated | At No Load | At Rated Load | Overall Length L |
|||||||||
Voltage | Speed | Current | Speed | Current | Torque | |||||||
VDC | rpm | mA | rpm | mA | gf.cm | mN.m | mm | gf.cm | gf.cm | mm | ||
ZWBPD006006-110 | 3.0 | 166 | 37 | 140 | 100 | 54.3 | 5.33 | 28.5 | 250 | 600 | 110.6 | 14.5 |
ZWBPD006006-148 | 3.0 | 124 | 37 | 105 | 100 | 72.8 | 7.14 | 250 | 600 | 148.1 | ||
ZWBPD006006-198 | 3.0 | 93 | 37 | 78 | 100 | 97.5 | 9.56 | 250 | 600 | 198.4 | ||
ZWBPD006006-266 | 3.0 | 69 | 37 | 58 | 100 | 130.5 | 12.80 | 250 | 600 | 265.7 | ||
ZWBPD006006-531 | 3.0 | 35 | 40 | 29 | 100 | 221.7 | 21.74 | 30.9 | 250 | 600 | 530.8 | 16.9 |
ZWBPD006006-711 | 3.0 | 26 | 40 | 21 | 95 | 250 | 24.52 | 250 | 600 | 711.0 | ||
ZWBPD006006-952 | 3.0 | 19 | 40 | 16 | 90 | 250 | 24.52 | 250 | 600 | 952.2 | ||
ZWBPD006006-1275 | 3.0 | 14 | 40 | 12 | 80 | 250 | 24.52 | 250 | 600 | 1275.2 | ||
ZWBPD006006-1708 | 3.0 | 11 | 40 | 10 | 70 | 250 | 24.52 | 250 | 600 | 1707.9 |
above specifications just for reference and customizable according to requirements.
Please let us know your requirements and we will provide you with micro transmission solutions.
2D Drawing
Application
Smart wearable devices | watch,VR,AR,XR and etc. |
Household application | kitchen appliances, sewing machines, corn popper, vacuum cleaner, garden tool, sanitary ware, window curtain, intelligent closestool, sweeping robot, power seat, standing desk, electric sofa, TV, computer, treadmill, spyhole, cooker hood, electric drawer, electric mosquito net, intelligent cupboard, intelligent wardrobe, automatic soap dispenser, UV baby bottle sterilizer, lifting hot pot cookware, dishwasher, washing machine, food breaking machine, dryer, air conditioning, dustbin, coffee machine, whisk,smart lock,bread maker,Window cleaning robot and etc. |
communication equipment | 5G base station,video conference,mobile phone and etc. |
Office automation equipments | scanners, printers, multifunction machines copy machines, fax (FAX paper cutter), computer peripheral, bank machine, screen, lifting socket, display,notebook PC and etc. |
Automotive products | conditioning damper actuator, car DVD,door lock actuator, retractable rearview mirror, meters, optic axis control device, head light beam level adjuster, car water pump, car antenna, lumbar support, EPB, car tail gate electric putter, HUD, head-up display, vehicle sunroof, EPS, AGS, car window, head restraint, E-booster, car seat, vehicle charging station and etc. |
Toys and models | radio control model, automatic cruise control, ride-on toy, educational robot, programming robot, medical robot, automatic feeder, intelligent building blocks, escort robot and etc. |
Medical equipments | blood pressure meter, breath machine, medical cleaning pump, medical bed, blood pressure monitors, medical ventilator, surgical staplers, infusion pump, dental instrument, self-clotting cutter, wound cleaning pump for orthopedic surgery,electronic cigarette, eyebrow pencil,fascia gun, , surgical robot,laboratory automation and etc. |
Industrials | flow control valves, seismic testing,automatic reclosing,Agricultural unmanned aerial vehicle,automatic feeder ,intelligent express cabinet and etc. |
Electric power tools | electric drill, screwdriver,garden tool and etc. |
Precision instruments | optics instruments,automatic vending machine, wire-stripping machine and etc. |
Personal care | tooth brush, hair clipper, electric shaver, massager, vibrator, hair dryer, rubdown machine, scissor hair machine, foot grinder,anti-myopia pen, facial beauty equipment, hair curler,Electric threading knife,POWER PERFECT PORE, Puff machine,eyebrow tweezers and etc. |
Consumer electronics | camera, mobile phone,digital camera, automatic retracting device,camcorder, kinescope DVD,headphone stereo, cassette tape recorder, bluetooth earbud charging case, turntable, tablet,UAV(unmanned aerial vehicle),surveillance camera,PTZ camera, rotating smart speaker and etc. |
robots | educational robot, programming robot, medical robot, escort robot and etc. |
Detailed Photos
Application
Smart wearable devices | watch,VR,AR,XR and etc. |
Household application | kitchen appliances, sewing machines, corn popper, vacuum cleaner, garden tool, sanitary ware, window curtain, intelligent closestool, sweeping robot, power seat, standing desk, electric sofa, TV, computer, treadmill, spyhole, cooker hood, electric drawer, electric mosquito net, intelligent cupboard, intelligent wardrobe, automatic soap dispenser, UV baby bottle sterilizer, lifting hot pot cookware, dishwasher, washing machine, food breaking machine, dryer, air conditioning, dustbin, coffee machine, whisk,smart lock,bread maker,Window cleaning robot and etc. |
communication equipment | 5G base station,video conference,mobile phone and etc. |
Office automation equipments | scanners, printers, multifunction machines copy machines, fax (FAX paper cutter), computer peripheral, bank machine, screen, lifting socket, display,notebook PC and etc. |
Automotive products | conditioning damper actuator, car DVD,door lock actuator, retractable rearview mirror, meters, optic axis control device, head light beam level adjuster, car water pump, car antenna, lumbar support, EPB, car tail gate electric putter, HUD, head-up display, vehicle sunroof, EPS, AGS, car window, head restraint, E-booster, car seat, vehicle charging station and etc. |
Toys and models | radio control model, automatic cruise control, ride-on toy, educational robot, programming robot, medical robot, automatic feeder, intelligent building blocks, escort robot and etc. |
Medical equipments | blood pressure meter, breath machine, medical cleaning pump, medical bed, blood pressure monitors, medical ventilator, surgical staplers, infusion pump, dental instrument, self-clotting cutter, wound cleaning pump for orthopedic surgery,electronic cigarette, eyebrow pencil,fascia gun, , surgical robot,laboratory automation and etc. |
Industrials | flow control valves, seismic testing,automatic reclosing,Agricultural unmanned aerial vehicle,automatic feeder ,intelligent express cabinet and etc. |
Electric power tools | electric drill, screwdriver,garden tool and etc. |
Precision instruments | optics instruments,automatic vending machine, wire-stripping machine and etc. |
Personal care | tooth brush, hair clipper, electric shaver, massager, vibrator, hair dryer, rubdown machine, scissor hair machine, foot grinder,anti-myopia pen, facial beauty equipment, hair curler,Electric threading knife,POWER PERFECT PORE, Puff machine,eyebrow tweezers and etc. |
Consumer electronics | camera, mobile phone,digital camera, automatic retracting device,camcorder, kinescope DVD,headphone stereo, cassette tape recorder, bluetooth earbud charging case, turntable, tablet,UAV(unmanned aerial vehicle),surveillance camera,PTZ camera, rotating smart speaker and etc. |
robots | educational robot, programming robot, medical robot, escort robot and etc. |
Company Profile
HangZhou CHINAMFG Machinery & Electronics Co., Ltd was established in 2001,We provide the total drive solution for customers from design, tooling fabrication, components manufacturing and assembly.
Workshop
Testing Equipment
1) Competitive Advantages
- 1) Competitive Advantages
19+year experience in manufacturing motor gearbox
We provide technical support from r&d, prototype, testing, assembly and serial production , ODM &OEM
Competitive Price
Product Performance: Low noise, High efficiency, Long lifespan
Prompt Delivery: 15 working days after payment
Small Orders Accepted
2) Main Products
-
Precision reduction gearbox and its diameter:3.4mm-38mm,voltage:1.5-24V,power: 0.01-40W,output speed:5-2000rpm and output torque:1.0 gf.cm -50kgf.cm,
- Customized worm and gear transmission machinery;
- Precise electromechanical motion module;
- Precise component and assembly of plastic and metal powder injection.
Our Services
- ODM & OEM
- Gearbox design and development
- Related technology support
- Micro drive gearbox custom solution
Packaging & Shipping
1) Packing Details
packed in nylon firstly, then carton, and then reinforced with wooden case for outer packing.
Or according to client’s requirement.
2) Shipping Details
samples will be shipped within 10 days;
batch order leading time according to the actual situation.
Certifications
Certifications
We Have passed to hold ISO9001:2015(CN11/3571),ISO14001:2004(U006616E0153R3M), ISO13485:2016(CN18/42018) and IATF16949:2016(CN11/3571.01).
and more…
FAQ
FAQ
1. Can you make the gearbox with custom specifications?
YES. We have design and development team, also a great term of engineers, each of them have
many work years experience.
2.Do you provide the samples?
YES. Our company can provide the samples to you, and the delivery time is about 5-15days according to the specification of gearbox you need.
3.What is your MOQ?
Our MOQ is 2000pcs. But at the beginning of our business, we accept small order.
4. Do you have the item in stock?
I am sorry we donot have the item in stock, All products are made with orders.
5. Do you provide technology support?
YES. Our company have design and development team, we can provide technology support if you
need.
6.How to ship to us?
We will ship the goods to you according to the DHL or UPS or FEDEX etc account you provide.
7.How to pay the money?
We accept T/T in advance. Also we have different bank account for receiving money, like US dollors or RMB etc.
8. How can I know the product is suitable for me?
Frist, you need to provide us the more details information about the product. We will recommend the item to you according to your requirement of specification. After you confirm, we will prepare the samples to you. also we will offer some good advances according to your product use.
9. Can I come to your company to visit?
YES, you can come to our company to visit at anytime, and welcome to visit our company.
10. How do contact us ?
Please send an inquiry
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
Application: | Motor, Toy, Car, Smart Pen |
---|---|
Function: | Change Drive Torque, Speed Reduction |
Layout: | Customize |
Hardness: | Hardened Tooth Surface |
Installation: | Customize |
Step: | Customize |
Customization: |
Available
| Customized Request |
---|
Can I Use Synthetic Oil in My Gearbox?
Yes, you can use synthetic oil in your gearbox, and in many cases, it can offer several advantages over conventional mineral-based oils:
- Improved Temperature Stability: Synthetic oils typically have a higher resistance to thermal breakdown, making them suitable for gearboxes that operate at high temperatures.
- Enhanced Lubrication: Synthetic oils often have superior lubrication properties, providing better protection against friction, wear, and component damage.
- Extended Oil Change Intervals: Synthetic oils can often withstand longer operating periods without losing their effectiveness, reducing the frequency of oil changes and maintenance.
- Reduced Viscosity Changes: Synthetic oils are less prone to viscosity changes at different temperatures, ensuring consistent lubrication performance in varying conditions.
- Lower Friction and Energy Loss: The smoother molecular structure of synthetic oils can lead to reduced internal friction, potentially improving gearbox efficiency and performance.
- Cold Weather Performance: Synthetic oils generally flow better at low temperatures, making them suitable for gearboxes operating in cold climates.
- Protection Against Oxidation: Synthetic oils often have better resistance to oxidation, helping to prevent the formation of sludge and deposits that can impact gearbox performance.
However, before switching to synthetic oil, it’s important to consider the manufacturer’s recommendations and specifications for your specific gearbox model. Some gearboxes may have specific requirements or restrictions on the type of lubricant to use. If the manufacturer approves the use of synthetic oil, it can be a beneficial choice, but if not, sticking to the recommended oil type is crucial to ensure proper gearbox function and warranty coverage.
editor by CX 2024-05-16
China Standard Precision Planetary Gearbox / ZdE, Zdf, ZDS, ZDF Series differential gearbox
Product Description
High precision planetary gearbox matched with serve motor, stepping motor are widely used.
Lowest backlash(<3'); High output torques; High efficiency(96%); Honed toothings; 22 ratios I=3, ^^512; Low noise(<65dB); Any mounting position; Easy motor mounting; Life time lubrication; Figure diameters 40, 60, 80, 120, 160mm; More options.
size | power | voltage | frequenty |
60.70.8.90mm | 3.6.10.20.40W | 110.220.12V | 50/60HZ |
SPECIFICATION FOR ZDE/ZDF SERIES PLANETARY GEARBOX:
SPECIFICATIONS | STAGE | RATIO | 40 | 60 | 80 | 120 | 160 | |
RATED OUTPUT TORQUE | N.M | 1 | 3 | 4.5 | 12 | 40 | 80 | 400 |
4 | 6 | 16 | 50 | 110 | 450 | |||
5 | 6 | 16 | 50 | 110 | 450 | |||
8 | 5 | 15 | 45 | 100 | 400 | |||
10 | 4 | 12 | 40 | 80 | 305 | |||
2 | 9 | – | 40 | 100 | 210 | – | ||
12 | 16.5 | 40 | 100 | 210 | 700 | |||
15 | 16.5 | 40 | 100 | 210 | 700 | |||
16 | 20 | 44 | 120 | 260 | 800 | |||
20 | 20 | 44 | 120 | 260 | 800 | |||
25 | 18 | 40 | 110 | 230 | 700 | |||
32 | 20 | 44 | 120 | 260 | 800 | |||
40 | 18 | 40 | 110 | 230 | 700 | |||
64 | 7.5 | 18 | 45 | 100 | 400 | |||
3 | 60 | 16.5 | 40 | 100 | 210 | – | ||
80 | 20 | 44 | 120 | 260 | – | |||
100 | 20 | 44 | 120 | 260 | – | |||
120 | 16.5 | 40 | 100 | 210 | – | |||
160 | 20 | 44 | 120 | 260 | – | |||
200 | 18 | 40 | 110 | 230 | – | |||
256 | 20 | 44 | 120 | 260 | – | |||
320 | 18 | 40 | 110 | 230 | – | |||
512 | 7.5 | 18 | 45 | 100 | – | |||
Scram Torque | N.m | 1,2,3 | 3-512 | 2 times of rated torque | ||||
Rated speed | rpm | 1,2 | 3-512 | 3000 | 3000 | 3000 | 3000 | 3000 |
Max speed | rpm | 1,2 | 3-100 | 4500 | 4500 | 4500 | 4500 | 4500 |
Backlash | arcmin | 1 | <12 | <8 | <8 | <8 | <8 | |
2 | <15 | <12 | <12 | <12 | <12 | |||
3 | <18 | <15 | <15 | <15 | <15 | |||
Torsional Rigidity | N.M/arcmin | 1,2,3 | 0.7 | 1.8 | 4.5 | 12 | 38 | |
Allow radial | N | 1,2,3 | 160 | 450 | 900 | 2100 | 6000 | |
Allow axial | N | 1,2,3 | 80 | 225 | 450 | 1050 | 3000 | |
Efficiency η | % | 1 | ≥96% | |||||
2 | ≥94% | |||||||
3 | ≥90% | |||||||
life | hr | 1,2,3 | 20000 | |||||
Weight | kg | 1 | 0.4 | 0.9 | 2.1 | 6 | 18 | |
2 | 0.5 | 1.1 | 2.6 | 8 | 22 | |||
3 | 0.6 | 1.3 | 3.1 | 9.5 | – | |||
Temperature | ºC | 1,2 | 3-100 | -25ºC~+90ºC | ||||
Lubrication | 1,2,3 | SYNTHETIC LUBRICATING GREASE | ||||||
Protection Grade | 1,2,3 | IP 54 | ||||||
Assembly | Easy and simple | |||||||
Noise( L=1M) | dB(A) | 1,2 | ≤55 | ≤58 | ≤60 | ≤65 | ≤70 |
Company Information
FAQ
Q: What’re your main products?
A: We currently produce Brushed Dc Motors, Brushed Dc Gear Motors, Planetary Dc Gear Motors, Brushless Dc Motors, Stepper motors, Ac Motors and High Precision Planetary Gear Box etc. You can check the specifications for above motors on our website and you can email us to recommend needed motors per your specification too.
Q: How to select a suitable motor?
A:If you have motor pictures or drawings to show us, or you have detailed specs like voltage, speed, torque, motor size, working mode of the motor, needed lifetime and noise level etc, please do not hesitate to let us know, then we can recommend suitable motor per your request accordingly.
Q: Do you have a customized service for your standard motors?
A: Yes, we can customize per your request for the voltage, speed, torque and shaft size/shape. If you need additional wires/cables soldered on the terminal or need to add connectors, or capacitors or EMC we can make it too.
Q: Do you have an individual design service for motors?
A: Yes, we would like to design motors individually for our customers, but it may need some mold developing cost and design charge.
Q: What’s your lead time?
A: Generally speaking, our regular standard product will need 15-30days, a bit longer for customized products. But we are very flexible on the lead time, it will depend on the specific orders.
Please contact us if you have detailed requests, thank you ! /* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
Application: | Industrial |
---|---|
Speed: | Constant Speed |
Number of Stator: | Single-Phase |
Function: | Driving, Control |
Casing Protection: | Closed Type |
Number of Poles: | 2 |
Customization: |
Available
| Customized Request |
---|
Steps to Replace a Faulty Gearbox in an Automobile
Replacing a faulty gearbox in an automobile is a complex task that requires proper tools, skills, and safety precautions. Here are the general steps involved in the process:
- Prepare the Vehicle: Park the vehicle on a flat surface and engage the parking brake. Disconnect the battery to ensure safety during the procedure.
- Drain Fluids: Drain the transmission fluid from the old gearbox into a suitable container.
- Disconnect Components: Remove any components obstructing access to the gearbox, such as the driveshaft, exhaust system, and linkage.
- Suspend the Engine: If necessary, use an engine hoist or support to suspend the engine safely.
- Support the Gearbox: Use a transmission jack to support the weight of the gearbox.
- Remove Gearbox: Detach the gearbox from the engine by removing bolts and disconnecting the clutch or torque converter.
- Install New Gearbox: Position the new gearbox onto the engine and secure it in place with bolts.
- Reconnect Components: Reattach the driveshaft, exhaust system, and linkage that were disconnected earlier.
- Refill Fluids: Fill the new gearbox with the appropriate transmission fluid according to the manufacturer’s specifications.
- Lower Engine: Carefully lower the engine back into its original position if it was suspended.
- Test and Adjust: Start the vehicle and test the new gearbox for proper operation. Check for any leaks, unusual noises, or gear shifting issues.
- Final Check: Double-check all connections and ensure that all components are properly secured.
- Dispose of Old Fluid: Dispose of the old transmission fluid safely and responsibly.
- Dispose of Old Gearbox: Properly dispose of the old gearbox according to local regulations.
It’s important to note that gearbox replacement can vary significantly depending on the vehicle’s make and model. It’s recommended to consult the vehicle’s service manual or seek professional assistance if you’re not experienced in automotive repair.
editor by CX 2024-05-16
China wholesaler Wholesale P5300 Reducer Construction Machinery Spare Parts, P4300 Hydraulic Planetary Reduction Gearbox Used for Concrete Trucks gearbox drive shaft
Product Description
Introducing the Mixer Truck Gear Box P5300, a cutting-edge component designed to power the most demanding mixer trucks in the construction and transportation industry. This gear box represents the pinnacle of engineering excellence, combining robust construction, precision performance, and user-friendly maintenance features.
The Mixer Truck Gear Box P5300 is manufactured from the highest quality materials, ensuring maximum durability and resistance to wear and tear. Its heavy-duty design can withstand the harshest operating conditions, from dusty construction sites to muddy roads, without compromising performance.
The precision-engineered gear system within the Gear Box P5300 is optimized for smooth power transmission and maximum torque output. This results in a significant increase in horsepower and load-handling capacity, allowing your mixer truck to work effortlessly even under heavy loads.
What’s more, the Gear Box P5300 is designed with ease of installation and maintenance in mind. Its modular construction allows for quick access to internal components, making routine checks and repairs straightforward. This reduces downtime and ensures your mixer truck remains operational for longer.
Safety is paramount when it comes to mixer truck gear boxes. The Gear Box P5300 incorporates multiple safety features, including overload protection and thermal sensors, to prevent damage and ensure the safe operation of your mixer truck.
In addition, the Gear Box P5300 is designed to be fuel-efficient, helping to reduce operating costs and minimize the environmental impact of your mixer truck. Its optimized gear ratios and precision engineering contribute to improved fuel economy, making it a sustainable choice for your business.
In summary, the Mixer Truck Gear Box P5300 is a high-performance, durable, and user-friendly component that is ideal for powering mixer trucks in the construction and transportation industry. Its precision engineering, fuel efficiency, and safety features make it a top choice for enhancing the performance and reliability of your mixer truck.
Model NO. | P5300 | Model | P5300 |
Lead Time | 5 Days | Transport Package | Standard Export Wooden Case |
Colour | as Your Request | Usage | Concrete Mixer |
Weight | 335KG | Specification | 56*56*68 |
Trademark | Bodeke | Origin | China |
HS Code | 8483457100 | Production Capacity | 100 Sets/Month |
Technical data of Camray CMR conrete mixer gearbox | |||
Model | P-5300 | P-4300 | |
Max.Output Torque Nm |
65,000 | 65,000 | |
Ratio l= |
1:135 | 1:135 | |
Max.installation angle of Drum | 11° | 12° | |
Max.Input speed rpm |
2500 | 2500 | |
Max.Output speed rpm |
18 | 18 | |
Max.Capacity of Drum m³ | 10~14 | 10~14 | |
Weight(without oil) KG | 325 | 325 | |
Lubrication Oil Quantity dm³ | 11.5 | 11.5 | |
Max.Misalignmeng of flange | |||
ZTS P68 reducer / gearbox | ZHP P75S reducer / gearbox | A4VG180HD1MT1/32R-NSF02F571-S PISTON pump | 875719000 |
ZTS P70 reducer / gearbox | DD33-MF reducer / gearbox | A7VO55LRDS/63L-NZB01-S PISTON pump | 8483457100 |
ZTS P75S reducer / gearbox | ZHP P68 reducer / gearbox | Concrete Mixer Truck Mixer Drum Cement Mixer | SAUER,Bonfiglioli,TOPUNIOU,KYB,REXROTH, , ,PMP |
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
Application: | Machinery |
---|---|
Function: | Change Drive Torque |
Layout: | Coaxial |
Hardness: | Hardened Tooth Surface |
Installation: | Oscillating Base Type |
Step: | Double-Step |
Samples: |
US$ 700/Piece
1 Piece(Min.Order) | |
---|
Customization: |
Available
| Customized Request |
---|
Is it Better to Repair or Replace a Damaged Gearbox?
Deciding whether to repair or replace a damaged gearbox depends on several factors and considerations:
- Extent of Damage: Assess the severity of the gearbox damage. Minor issues like worn bearings or seals may be repairable, while extensive damage may necessitate a replacement.
- Cost of Repair: Compare the cost of repairing the gearbox to the cost of replacing it with a new or remanufactured unit. In some cases, repairs might be more cost-effective.
- Availability of Parts: Availability of replacement parts for the gearbox can influence the repair option. If parts are hard to find, replacement might be a more viable choice.
- Age and Condition: Consider the age and overall condition of the vehicle. If the vehicle is older and nearing the end of its lifespan, a replacement gearbox might offer better long-term reliability.
- Performance and Efficiency: A new or remanufactured gearbox might offer improved performance and efficiency compared to a repaired one.
- Future Maintenance: Evaluate potential future maintenance needs of both repair and replacement options. A replacement gearbox might come with a warranty and require less frequent maintenance.
- Professional Assessment: Seek advice from a qualified mechanic or technician who can thoroughly assess the gearbox and provide recommendations based on expertise.
Ultimately, the decision to repair or replace a damaged gearbox should be based on a careful evaluation of these factors. It’s recommended to consult with professionals to make an informed choice that best suits your specific situation and budget.
editor by CX 2024-05-15
China wholesaler Rxf Series Single-Stage Helical Gearbox with Flange for Belt Conveyor with high quality
Product Description
RXF Series Single-stage Helical gearbox with flange
Input Configurations |
Direct motor coupled |
with IEC B5/B14 motor flange |
|
with IEC B5/B14 motor mounted |
|
with CHINAMFG input shaft |
|
Output Configurations |
CHINAMFG output shaft |
CHINAMFG output shaft with flange |
|
Variants of Helical Gear Unit Series RX / R / RF |
CHINAMFG or 2/3 Stage |
Foot- or flange-mounted |
|
Foot- and flange-mounted |
|
Flange-mounted with extended bearing housing |
Technical Data:
Housing material | Cast iron/Ductile iron |
Housing hardness | HBS190-240 |
Gear material | 20CrMnTi alloy steel |
Surface hardness of gears | HRC58°~62 ° |
Gear core hardness | HRC33~40 |
Input / Output shaft material | 42CrMo alloy steel |
Input / Output shaft hardness | HRC25~30 |
Machining precision of gears | accurate grinding, 6~5 Grade |
Lubricating oil | GB L-CKC220-460, Shell Omala220-460 |
Heat treatment | tempering, cementiting, quenching, etc. |
Efficiency | 94%~96% (depends on the transmission stage) |
Noise (MAX) | 60~68dB |
Temp. rise (MAX) | 40°C |
Temp. rise (Oil)(MAX) | 50°C |
Vibration | ≤20µm |
Backlash | ≤20Arcmin |
Brand of bearings | China top brand bearing, HRB/LYC/ZWZ/C&U. Or other brands requested, NSK. |
Brand of oil seal | NAK — ZheJiang or other brands requested |
Specification
Model |
CHINAMFG Output Shaft Dia./Length mm |
Horizontal Center Height mm |
External Flange Dia. mm |
Power (kw) |
Ratio (i) |
Nominal Torque (Nm) |
R/RF37 |
ф25/50 |
90 |
120 |
0.12-0.75 |
5-136 |
150 |
R/RF47 |
ф30/60 |
115 |
160 |
0.25-2.2 |
5-173 |
300 |
R/RF57 |
ф35/70 |
115 |
200 |
1.18-5.5 |
5-173 |
400 |
R/RF67 |
ф35/70 |
130 |
200 |
0.37-7.5 |
5-170 |
500 |
R/RF77 |
ф40/80 |
140 |
250 |
0.55-11.0 |
5-192 |
750 |
R/RF87 |
ф50/100 |
180 |
300 |
0.75-18.5 |
5-192 |
1250 |
R/RF97 |
ф60/120 |
225 |
350 |
1.50-30.0 |
5-197 |
2400 |
R/RF107 |
ф70/140 |
250 |
350 |
2.20-45.0 |
5-197 |
3600 |
R/RF137 |
ф90/170 |
315 |
450 |
4.00-45.00 |
5-197 |
6600 |
R/RF147 |
ф110/210 |
355 |
450 |
7.50-90.00 |
5-195 |
10700 |
R/RF167 |
ф120/210 |
425 |
550 |
11.00-132.00 |
5-186 |
14800 |
Company Profile
Packing
Scenarioes
FAQ
Q1: I want to buy your products, how can I pay?
A: You can pay via T/T(30%+70%), L/C ,D/P etc.
Q2: How can you guarantee the quality?
A: One year’s warranty against B/L date. If you meet with quality problem, please send us pictures or video to check, we promise to send spare parts or new products to replace. Our guarantee not include inappropriate operation or wrong specification selection.
Q3: How we select models and specifications?
A: You can email us the series code (for example: RC series helical gearbox) as well as requirement details, such as motor power,output speed or ratio, service factor or your application…as much data as possible. If you can supply some pictures or drawings,it is nice.
Q4: If we don’t find what we want on your website, what should we do?
A: We offer 3 options:
1, You can email us the pictures, drawings or descriptions details. We will try to design your products on the basis of our
standard models.
2, Our R&D department is professional for OEM/ODM products by drawing/samples, you can send us samples, we do customized design for your bulk purchasing.
3, We can develop new products if they have good market. We have already developed many items for special using successful, such as special gearbox for agitator, cement conveyor, shoes machines and so on.
Q5: Can we buy 1 pc of each item for quality testing?
A: Yes, we are glad to accept trial order for quality testing.
Q6: How about your product delivery time?
A: Normally for 20’container, it takes 25-30 workdays for RV series worm gearbox, 35-40 workdays for helical gearmotors.
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
Application: | Motor, Machinery, Agricultural Machinery |
---|---|
Hardness: | Hardened Tooth Surface |
Layout: | Coaxial |
Gear Shape: | Cylindrical Gear |
Step: | Single-Step |
Type: | Gear Reducer |
Customization: |
Available
| Customized Request |
---|
Common Problems with Gearboxes and How to Troubleshoot Them
Gearboxes can encounter various issues over time. Here are some common problems and troubleshooting steps:
- Noise and Vibration: Excessive noise or vibration may indicate misalignment, worn gears, or insufficient lubrication. Check alignment, inspect gears for wear, and ensure proper lubrication.
- Overheating: Overheating can be caused by high friction, inadequate lubrication, or overloading. Verify lubrication levels, reduce loads, and ensure proper ventilation.
- Leakage: Oil leaks may result from worn seals or gaskets. Inspect and replace damaged seals, and ensure proper sealing.
- Reduced Performance: Decreased performance could be due to worn gears, damaged bearings, or misalignment. Inspect components, replace damaged parts, and realign as needed.
- Gear Wear and Tooth Damage: Wear on gear teeth can result from excessive loads or poor lubrication. Replace worn gears and ensure proper lubrication.
- Shaft Misalignment: Shaft misalignment can lead to increased wear and noise. Realign shafts using precision measurement tools.
- Lubrication Issues: Inadequate or contaminated lubrication can cause premature wear. Regularly check and replace lubricant, and use the correct type for your gearbox.
- Bearing Failure: Bearing failure may result from overload, misalignment, or inadequate lubrication. Replace worn bearings and address underlying issues.
- Seal Damage: Damaged seals can lead to leaks and contamination. Replace seals and ensure proper installation.
- Gearbox Lockup: Gearbox lockup may occur due to foreign objects or damaged components. Disassemble and inspect the gearbox, removing any obstructions and replacing damaged parts.
Regular maintenance, proper lubrication, and timely troubleshooting are key to addressing gearbox problems and ensuring smooth operation.
editor by CX 2024-05-15
China Good quality Agricultural Machinery Hydraulic Pto Pump Drive Gearbox Speed Increaser for Power Distribution gearbox drive shaft
Product Description
The Pump Drives (Hydraulic pump Drives) is a gearbox allowing the connection between a prime mover (internal combustion engine or electric motor for example) and 1 or more hydraulic pumps. Usually it is used on both stationary and mobile application where mechanical power must be converted into hydraulic power for the purpose of operating travel functions and services.
The hydraulic pumps drives gearboxes consist of a gear drive inside a CHINAMFG housing that connects to a gasoline or diesel engine. The opposite side contains 1 or more standard 2- or 4-bolt flanges for mounting hydraulic pumps. This configuration provides several benefits. For one, 2 or more identical pumps can be connected to provide nearly identical hydraulic output flow from each. Or different sized pumps can be used provide output flow proportional to the displacement of each pump.These gearboxes not only saves space and weight but also eliminates the number of components and reduces assembly time for the whole machinery. Our modular pump drives could allow driving 2 to 4 pumps simultaneously. This not only offers design flexibility, but can boost system efficiency as well.
Model | 2 pumps drive | 3 pumps drive | 4 pumps drive | |||||||
Parameter | KK190-2N | KK400-2N | KK530-2N | KK700-2N | KK280-3N | KK400-3N | KK530-3N | KK700-3N | KK530-4N | KK700-4N |
Max. Input power (KW) | 190 | 400 | 530 | 700 | 280 | 400 | 530 | 700 | 530 | 700 |
Max. Output power per pump pad (KW) | 110 | 210 | 270 | 360 | 150 | 210 | 270 | 360 | 270 | 330 |
Max. Output torque per pump pad (Nm) | 400 | 900 | 1500 | 1900 | 800 | 900 | 1500 | 1900 | 1500 | 1800 |
Max. Input speed (RPM) | 2800 | 2600 | 2600 | 2400 | 2800 | 2600 | 2600 | 2400 | 2600 | 2400 |
Max. Output speed (RPM) | 3200 | 2800 | 2800 | 2700 | 3200 | 2800 | 2800 | 2700 | 2800 | 2700 |
Transmission ratio | 0.74/0.81/0.89/0.98··· | 0.67/0.74/0.81/0.89/0.98··· | 0.67/0.74/0.81/0.89/0.98··· | 0.67/0.74/0.81/0.89/0.98··· | 0.74/0.81/0.89/0.98··· | 0.67/0.74/0.81/0.89/0.98··· | 0.67/0.74/0.81/0.89/0.98··· | 0.67/0.74/0.81/0.89/0.98··· | 0.67/0.74/0.81/0.89/0.98··· | 0.67/0.74/0.81/0.89/0.98··· |
Mount size of Prime mover | SAE #3 #4 etc. | SAE #2 #3 etc. | SAE #1 #2 #3 etc. | SAE #0 #1 #2 etc. | SAE #3 #4 etc. | SAE #2 #3 etc. | SAE #1 #2 #3 etc. | SAE #0 #1 #2 etc. | SAE #1 #2 #3 etc. | SAE #1 #2 etc. |
Port size of Single pump | SAE A,B,C flange etc. | SAE A,B,C,D flange etc. | SAE B,C,D,E flange etc. | SAE C,D,E flange etc. | SAE A,B,C flange etc. | SAE A,B,C,D flange etc. | SAE B,C,D,E flange etc. | SAE C,D,E flange etc. | SAE B,C,D,E flange etc. | SAE B C,D flange etc. |
Housing material | Cast iron | Cast iron | Cast iron | Cast iron | Cast iron | Cast iron | Cast iron | Cast iron | Cast iron | Cast iron |
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
Application: | Machinery, Agricultural Machinery |
---|---|
Function: | Distribution Power, Speed Changing, Speed Reduction, Speed Increase |
Installation: | Horizontal Type |
Type: | Cylindrical Gear Box |
Product Name: | Hydraulic Pump Drive |
Conditon: | New |
Samples: |
US$ 4990/Piece
1 Piece(Min.Order) | |
---|
Customization: |
Available
| Customized Request |
---|
Can I Use Synthetic Oil in My Gearbox?
Yes, you can use synthetic oil in your gearbox, and in many cases, it can offer several advantages over conventional mineral-based oils:
- Improved Temperature Stability: Synthetic oils typically have a higher resistance to thermal breakdown, making them suitable for gearboxes that operate at high temperatures.
- Enhanced Lubrication: Synthetic oils often have superior lubrication properties, providing better protection against friction, wear, and component damage.
- Extended Oil Change Intervals: Synthetic oils can often withstand longer operating periods without losing their effectiveness, reducing the frequency of oil changes and maintenance.
- Reduced Viscosity Changes: Synthetic oils are less prone to viscosity changes at different temperatures, ensuring consistent lubrication performance in varying conditions.
- Lower Friction and Energy Loss: The smoother molecular structure of synthetic oils can lead to reduced internal friction, potentially improving gearbox efficiency and performance.
- Cold Weather Performance: Synthetic oils generally flow better at low temperatures, making them suitable for gearboxes operating in cold climates.
- Protection Against Oxidation: Synthetic oils often have better resistance to oxidation, helping to prevent the formation of sludge and deposits that can impact gearbox performance.
However, before switching to synthetic oil, it’s important to consider the manufacturer’s recommendations and specifications for your specific gearbox model. Some gearboxes may have specific requirements or restrictions on the type of lubricant to use. If the manufacturer approves the use of synthetic oil, it can be a beneficial choice, but if not, sticking to the recommended oil type is crucial to ensure proper gearbox function and warranty coverage.
editor by CX 2024-05-14
China best OEM Custom Made Right Angle Motor Transmission Speed Reducer Planetary Gearbox gearbox drive shaft
Product Description
Company Profile
Workshop
Detailed Photos
Product Description
Material | Alloy Steel, Copper alloy(brass,silicon bronze,phosphor bronze,aluminum bronze,beryllium copper),Stainless Steel,Aluminum,Titanium, Magnesium, Superalloys,Molybdenum, Invar,,Zinc,Tungsten steel,incoloy,Nickel 200,Hastelloy, Inconel,Monel,ABS, PEEK,PTFE,PVC,Acetal. |
Surface Treatment | Zn-plating, Ni-plating, Cr-plating, Tin-plating, copper-plating, the wreath oxygen resin spraying, the heat disposing, hot-dip galvanizing, black oxide coating, painting, powdering, color zinc-plated, blue black zinc-plated, rust preventive oil, titanium alloy galvanized, silver plating, plastic, electroplating, anodizing etc. |
Producing Equipment | CNC machine,automatic lathe machine,CNC milling machine,lasering,tag grinding machine etc. |
Drawing Format | Pro/E, Auto CAD, CHINAMFG Works, UG, CAD/CAM, PDF |
Managing Returned Goods | With quality problem or deviation from drawings |
Warranty | Replacement at all our cost for rejected products |
Main Markets | North America, South America, Eastern Europe , West Europe , North Europe, South Europe, Asia |
How to order | * You send us drawing or sample |
* We carry through project assessment | |
* We make the sample and send it to you after you confirmed our design | |
* You confirm the sample then place an order and pay us 30% deposit | |
* We start producing | |
* When the goods is done, you pay us the balance after you confirmed pictures or tracking numbers. | |
* Trade is done, thank you!! |
Quality Control
Packaging & Shipping
Customer Reviews
FAQ
Q1:What kind of information do you need for quotation?
A: You can provide 2D/3D drawing or send your sample to our factory, then we can make according to your sample.
Q2: Can we CHINAMFG NDA?
A: Sure. We can CHINAMFG the NDA before got your drawings.
Q3: Do you provide sample?
A: Yes, we can provide you sample before mass order.
Q4: How can you ensure the quality?
A: We have profesional QC,IQC, OQC to guarantee the quality.
Q5: Delivery time?
A: For samples genearlly need 25 days. Mass production: around 30~45 days after receipt of deposit (Accurate delivery time
depends on specific items and quantities)
Q6: How about the transportation?
A: You can choose any mode of transportation you want, sea delivery, air delivery or door to door express.
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
Application: | Motor, Electric Cars, Motorcycle, Machinery, Marine |
---|---|
Function: | Change Drive Direction, Speed Changing, Speed Reduction |
Layout: | Coaxial |
Hardness: | Hardened Tooth Surface |
Installation: | Torque Arm Type |
Step: | Four-Step |
Customization: |
Available
| Customized Request |
---|
Can I Use Synthetic Oil in My Gearbox?
Yes, you can use synthetic oil in your gearbox, and in many cases, it can offer several advantages over conventional mineral-based oils:
- Improved Temperature Stability: Synthetic oils typically have a higher resistance to thermal breakdown, making them suitable for gearboxes that operate at high temperatures.
- Enhanced Lubrication: Synthetic oils often have superior lubrication properties, providing better protection against friction, wear, and component damage.
- Extended Oil Change Intervals: Synthetic oils can often withstand longer operating periods without losing their effectiveness, reducing the frequency of oil changes and maintenance.
- Reduced Viscosity Changes: Synthetic oils are less prone to viscosity changes at different temperatures, ensuring consistent lubrication performance in varying conditions.
- Lower Friction and Energy Loss: The smoother molecular structure of synthetic oils can lead to reduced internal friction, potentially improving gearbox efficiency and performance.
- Cold Weather Performance: Synthetic oils generally flow better at low temperatures, making them suitable for gearboxes operating in cold climates.
- Protection Against Oxidation: Synthetic oils often have better resistance to oxidation, helping to prevent the formation of sludge and deposits that can impact gearbox performance.
However, before switching to synthetic oil, it’s important to consider the manufacturer’s recommendations and specifications for your specific gearbox model. Some gearboxes may have specific requirements or restrictions on the type of lubricant to use. If the manufacturer approves the use of synthetic oil, it can be a beneficial choice, but if not, sticking to the recommended oil type is crucial to ensure proper gearbox function and warranty coverage.
editor by CX 2024-05-14
China Custom for CZPT E345D Rotary Motor Reduction Box Rotary Gearbox Motor Transmission Box Excavator Spare Parts synchromesh gearbox
Product Description
Our Advantage
1.Quick response within 12 hours
2.Accept small order(MOQ:1pcs)
3.Custom service.Unusual packaging,standard packing or as customer required
4.Excellent after-sales service
5.Strict quality control system.100% factory testing and inspection personnel in accordance with international standards for the high-frequency sampling, to ensure the quality of products manufacture d
6.Accept ODM&OEM
Reducer Model | Applicable Machine Model | Motor Install Hole | Housing Install Hole | Shaft Pinion Gear Diameter | Shaft Pinion Gear Height | Shaft Pinion No. Teeth | Weight/kg | ||
A | B | C | H | Z | |||||
GS11A05 | SDLG6205-6210Rotary | φ282 | 8-M14 | φ360 | 11-φ22 | φ194 | 91 | 25 | 144.47 |
GS11A06 | Hyundai215vs Rotary | φ224 | 4-M16 | φ360 | 11-φ22 | φ194 | 88 | 25 | 154.42 |
GS11A09 | Yuchai230 Rotary | φ224 | 4-M16 | φ360 | 10-φ22 | φ192 | 94 | 25 | 154.25 |
GS11A08 | Yuchai21Ton Rotary | φ282 | 8-M14 | φ360 | 10-φ22 | φ192 | 94 | 13 | 145.38 |
GS11A02 | Cheryl20Ton Rotary | φ282 | 8-M14 | φ360 | 10-φ22 | φ192 | 94 | 13 | 145.25 |
GS11A10 | XCMGXE210 Rotary | φ224 | 4-M16 | φ360 | 10-φ22 | φ192 | 94 | 13 | 155.72 |
Product Parameters
EXCAVATOR | MODELS | |||||
CATERPILLA*R | E70 | E70B | E70B-7 | E70C | E120 | E140B |
E200B | E240 | E240B | E300B | E305 | E311 | |
E312 | E312B | E312C | E315 | E315B | E315C | |
E325 | E325B | E330 | E330B | E330C | E340B | |
E450 | ||||||
PC SERIES | PC45 | PC50 | PC50-2 | PC50-5 | PC55 | PC90 |
PC60 | PC60-2 | PC60-3 | PC60-5 | PC60-6 | PC60-7 | |
PC100 | PC100-3 | PC100-5 | PC100-6 | PC150 | PC150-3 | |
PC120 | PC120-3 | PC120-5 | PC120-6 | PC150-5 | ||
PC200-1 | PC200-2 | PC200-3 | PC200-5 | PC200-6 | PC200-7 | |
PC220-1 | PC220-3 | PC220-5 | PC220-7 | PC75 | PC80 | |
PC300-3 | PC300-5 | PC300-6 | PC300-7 | |||
PC400 | PC400-3 | PC400-6 | PC450 | PC450-6 | ||
HITACHI– | EX60-1 | EX60-2 | EX60-3 | EX60-5 | EX60-6 | EX70 |
EX100 | EX100-2 | EX80-5 | EX135 | EX160-1 | ||
EX120 | EX120-2 | EX120-5 | EX120-6 | EX120-7 | ||
EX200-1 | EX200-2 | EX200-3 | EX200-5 | EX200-6 | EX210-1 | |
EX220-1 | EX220-2 | EX220-3 | EX220-5 | EX220-6 | EX270 | |
EX300-1 | EX300-2 | EX300-3 | EX300-5 | EX330 | ||
EX400 | EX400-3 | EX450 | EX450-5 | EX500-3 | ||
ZX55 | ZX120 | ZX200 | ZX230 | |||
UH04 | UH07-5 | UH07-7 | UH160 | KH120-2 | ||
KATO | HD55 | HD100 | HD140 | HD140-3 | ||
HD250 | HD250-1 | HD250-2 | HD250G | HD250-7 | ||
HD300 | HD307 | HD400 | HD400-2 | HD400-5 | HD400-7 | |
HD450 | HD450-2 | HD450-7 | HD450SE | HD400SEM | ||
HD550 | HD550-2 | HD550-3 | HD550-5 | HD550-7 | ||
HD700-2 | HD700-5 | HD700-7 | HD770-1 | HD770-2 | ||
HD800-1 | HD800-2 | HD800-5 | HD800-7 | HD820 | ||
HD880-1 | HD880-2 | HD880-5 | HD900-5 | HD900-7 | HD1880-1 | |
HD1220 | HD1250 | HD1250-5 | HD1250-7 | HD120-7(6D102) | ||
KOBELCO | SK09 | SK50 | SK55 | SK130 | SK135 | SK160 |
SK60 | SK60-3 | SK60-6 | SK60-7 | SK70-6 | SK55 | |
SK100-1 | SK100-3 | SK100-5 | SK120 | SK120-3 | SK120-5 | |
SK200-1 | SK200-2 | SK200-3 | SK200-5 | SK200-6 | SK200-6E | |
SK200-7 | SK210-6 | SK220-1 | SK220-3 | SK230 | SK230-6E | |
SK230-8 | SK260 | SK300 | SK310 | SK310-3 | SK330 | |
SK330-8 | SK450-1 | |||||
SUMITOMO | SH30 | SH40 | SH60 | SH75 | SH100 | SH130 |
SH120 | SH120A1 | SH120-3 | SH120-6 | SH120A3 | ||
SH200 | SH200A1 | SH200A3 | SH220 | SH260 | SH265 | |
SH280 | SH280DJ | SH280EJ | SH280F2 | SH280FG-2 | SH280FG | |
SH300 | SH340 | SH340EJ | SH340F1 | SH340F2 | SH350 | |
SH160 | SH160-2 | SH430 | SH430FJ | LS280 | SH915 | |
HYUNDAI | R55 | R60 | R80-8 | R130 | R170 | R180 |
R200 | R200-5 | R210 | R210-3 | R210-5 | ||
R220 | R220-5 | R300 | R250 | R250-5 | ||
R305-7 | R310 | R320-7 | R335-7 | |||
DAEWOO | DH55 | DH60 | DH60-5 | DH200-5 | ||
DH220-2 | DH220-3 | DH220-5 | DH225-7 | DH250-7 | DH220-7 | |
DH258-7 | DH280 | DH300 |
FAQ
1: When will ship my order ?
Once we get confirmation of payment, we will try the best to ship order within 24 hours
2: How long to prepared the goods?
We have many stock for each iterm. so dont woride .we have enought stock for u
3: Which shipment you can supply?
By sea, by air or by express (DHL, FEDEX ,TNT,UPS,EMS)
4.How long does it take to clients address ?
The normal delivery time is 4-5 days .depending 1 which country u are in
5.How can i know my order it already shipping ?
When the goods shipping , i will email u for tracking number for goods. if by sea or by air , i can offer bill of lading to u
6.If i was not satisfied with the products, can i return goods ?
Yes . we offer exchanged and repair serve in the warranty time . please /* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
After-sales Service: | Online Support |
---|---|
Warranty: | 6 Months |
Type: | Rotary Gearbox |
Samples: |
US$ 55/Piece
1 Piece(Min.Order) | Order Sample |
---|
Customization: |
Available
| Customized Request |
---|
.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
---|
Payment Method: |
|
---|---|
Initial Payment Full Payment |
Currency: | US$ |
---|
Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
---|
Can I Use Synthetic Oil in My Gearbox?
Yes, you can use synthetic oil in your gearbox, and in many cases, it can offer several advantages over conventional mineral-based oils:
- Improved Temperature Stability: Synthetic oils typically have a higher resistance to thermal breakdown, making them suitable for gearboxes that operate at high temperatures.
- Enhanced Lubrication: Synthetic oils often have superior lubrication properties, providing better protection against friction, wear, and component damage.
- Extended Oil Change Intervals: Synthetic oils can often withstand longer operating periods without losing their effectiveness, reducing the frequency of oil changes and maintenance.
- Reduced Viscosity Changes: Synthetic oils are less prone to viscosity changes at different temperatures, ensuring consistent lubrication performance in varying conditions.
- Lower Friction and Energy Loss: The smoother molecular structure of synthetic oils can lead to reduced internal friction, potentially improving gearbox efficiency and performance.
- Cold Weather Performance: Synthetic oils generally flow better at low temperatures, making them suitable for gearboxes operating in cold climates.
- Protection Against Oxidation: Synthetic oils often have better resistance to oxidation, helping to prevent the formation of sludge and deposits that can impact gearbox performance.
However, before switching to synthetic oil, it’s important to consider the manufacturer’s recommendations and specifications for your specific gearbox model. Some gearboxes may have specific requirements or restrictions on the type of lubricant to use. If the manufacturer approves the use of synthetic oil, it can be a beneficial choice, but if not, sticking to the recommended oil type is crucial to ensure proper gearbox function and warranty coverage.
editor by CX 2024-05-13
China manufacturer 115mm ZB Series IP65 Protection Grade High Precision and Small Backlash Planetary Gearbox with high quality
Product Description
115mm ZB Series IP65 Protection Grade High Precision and Small Backlash Planetary Gearbox
Detailed Photos
Product Parameters
Note : It’s just the typical technical data for you reference, The specification such as voltage, speed, torque, shaft can be customized by your needs. Please contact us for more details. Thanks.
Company Profile
FAQ
Q: What’re your main products?
A: We currently produce Brushed Dc Motors, Brushed Dc Gear Motors, Planetary Dc Gear Motors, Brushless Dc Motors, Stepper motors, Ac Motors and High Precision Planetary Gear Box etc. You can check the specifications for above motors on our website and you can email us to recommend needed motors per your specification too.
Q: How to select a suitable motor?
A:If you have motor pictures or drawings to show us, or you have detailed specs like voltage, speed, torque, motor size, working mode of the motor, needed lifetime and noise level etc, please do not hesitate to let us know, then we can recommend suitable motor per your request accordingly.
Q: Do you have a customized service for your standard motors?
A: Yes, we can customize per your request for the voltage, speed, torque and shaft size/shape. If you need additional wires/cables soldered on the terminal or need to add connectors, or capacitors or EMC we can make it too.
Q: Do you have an individual design service for motors?
A: Yes, we would like to design motors individually for our customers, but it may need some mold developing cost and design charge.
Q: What’s your lead time?
A: Generally speaking, our regular standard product will need 15-30days, a bit longer for customized products. But we are very flexible on the lead time, it will depend on the specific orders.
Please contact us if you have detailed requests, thank you ! /* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
Application: | Motor, Machinery |
---|---|
Function: | Speed Changing, Speed Reduction |
Layout: | Cycloidal |
Hardness: | Hardened Tooth Surface |
Installation: | Vertical Type |
Step: | Three-Step |
Customization: |
Available
| Customized Request |
---|
How to Calculate Gear Ratio in a Gearbox
Gear ratio is a fundamental parameter in a gearbox that represents the ratio of the number of teeth between two gears. It determines how much the output gear rotates in relation to the input gear. The formula to calculate gear ratio is:
Gear Ratio (GR) = Number of Teeth on Output Gear / Number of Teeth on Input Gear
Here’s a step-by-step guide on how to calculate gear ratio:
- Identify the input and output gears in the gearbox.
- Count the number of teeth on the output gear (the gear connected to the output shaft).
- Count the number of teeth on the input gear (the gear connected to the input shaft).
- Plug the values into the gear ratio formula: GR = Number of Teeth on Output Gear / Number of Teeth on Input Gear.
- Calculate the gear ratio by performing the division.
The gear ratio provides insight into how much the input gear needs to rotate to achieve a certain rotation of the output gear. It influences torque, speed, and direction of rotation in the gearbox.
editor by CX 2024-05-10
China Hot selling CZPT CZPT Gearbox Parts Small Cover Assembly AC22062100101 with Great quality
Product Description
Sinotruk CHINAMFG Gearbox Parts Small Cover Assembly Ac2206215711
Company | ChinaMach Industry Co.,Ltd |
Brand | SINOTRUK HOWO/WEICHAI/MAN/SHACMAN/FAW/FOTON/AUMAN/NORTHBENZ/SANY/SHXIHU (WEST LAKE) DIS.I/SDLG |
QUALITY | Original part/OE part |
Payment term | T/T L/C , Flexible billing method |
Packing | Standard packing |
We can provide:
TRUCK
Sales Chinese trucks and construction machinery,Provide modificationsu,pgrades, consulting services
SPARE TRUCK
Supply China Truck spare parts and construction machinery parts. Products Include: Sinotruk HOWO, CHINAMFG Power , Fonton, Shacman, SHXIHU (WEST LAKE) DIS.I, CHINAMFG ,SDLG
SERVICE
Provide cargo warehousing, packaging, shipping and export agency services
Agent procurement, inspection The inspection agency
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
Certification: | ISO9001 |
---|---|
Driving System Parts: | Frame |
Electrical System Parts: | Starting System |
Brake System Parts: | Brake |
Transmission System Parts: | Transmission Shaft |
Steering System Parts: | Steering Transmission Device |
Samples: |
US$ 1/Piece
1 Piece(Min.Order) | |
---|
Customization: |
Available
| Customized Request |
---|
How to Choose the Right Gearbox for Your Machinery
Selecting the appropriate gearbox for your machinery involves careful consideration of several key factors. Here’s a step-by-step guide to help you make the right choice:
- Identify Application Requirements: Understand the specific requirements of your machinery, including torque, speed, load, direction of rotation, and duty cycle.
- Choose Gear Type: Determine the type of gears that best suit your needs, such as spur, helical, bevel, planetary, or others, based on factors like efficiency, noise level, and space constraints.
- Calculate Gear Ratio: Calculate the required gear ratio to achieve the desired output speed and torque. Consider factors like input and output shaft speeds.
- Select Gear Material: Choose appropriate gear materials based on factors like durability, wear resistance, and corrosion resistance. Common materials include steel, cast iron, and various alloys.
- Consider Efficiency: Evaluate the gearbox’s efficiency and select one that meets your energy efficiency requirements.
- Account for Load Conditions: Analyze the load conditions, such as constant or intermittent loads, shock loads, and starting and stopping frequencies.
- Check Lubrication Requirements: Consider the lubrication needs of the gearbox and ensure proper lubrication for smooth operation and longevity.
- Factor in Space Constraints: Consider the available space for installing the gearbox and choose a size that fits within your machinery.
- Assess Environmental Conditions: Evaluate the operating environment, including temperature, humidity, and exposure to dust or corrosive substances.
- Review Mounting Options: Determine the mounting options that work best for your machinery, such as foot-mounted, flange-mounted, or shaft-mounted gearboxes.
- Consult with Experts: Seek advice from gearbox manufacturers or engineers to ensure you make an informed decision.
Choosing the right gearbox is crucial for achieving optimal machinery performance, longevity, and reliability.
editor by CX 2024-05-09
China best Excavator PC3000-6 Final Drive Motor PC3000-6 Travel Gearbox 89810840 in Stock automatic gearbox
Product Description
Our factory produces excavators, bulldozers, loaders and various accessories has more than 10 years of experience, reliable quality, affordable prices, welcome you to inquire.
Detailed Photos
89810840 PC3
Product Parameters
part name |
Travel Gearbox |
part number | 89810840 |
MOQ | 1 piece |
quality | high-quality |
Company Profile
Our Service
Certifications
FAQ
1. Who are we?
We are based in ZheJiang , China. Since 2011, we have sold to Southeast Asia, South America, East Asia, Africa, North America, South Asia, Eastern Europe, Western Europe, Middle East, Oceania, Central America, Northern Europe, Southern Europe and the domestic market. There are about 11-50 people in total in our office.
2. How can we guarantee the quality?
Always have pre-production samples before mass production;
Always carry out final inspection before shipment;
3. What can you buy from us?
Excavator parts, construction machinery parts, excavators, bulldozers, loaders, graders and other earthwork engineering machinery and equipment
4. What services can we provide?
Accepted delivery terms: FOB, CFR, CIF;
Accepted payment currencies: USD, EUR, CAD;
Accepted payment methods: T/T, L/C, D/P D/A;
Languages spoken: English, Chinese, Spanish, Russian
Packaging & Shipping
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
After-sales Service: | 24 Hours *7 Days Service |
---|---|
Warranty: | 3 Months |
Type: | Gearbox |
Application: | Excavator |
Certification: | CE, ISO9001: 2000 |
Condition: | New |
Samples: |
US$ 59000/Piece
1 Piece(Min.Order) | |
---|
Customization: |
Available
| Customized Request |
---|
Common Problems with Gearboxes and How to Troubleshoot Them
Gearboxes can encounter various issues over time. Here are some common problems and troubleshooting steps:
- Noise and Vibration: Excessive noise or vibration may indicate misalignment, worn gears, or insufficient lubrication. Check alignment, inspect gears for wear, and ensure proper lubrication.
- Overheating: Overheating can be caused by high friction, inadequate lubrication, or overloading. Verify lubrication levels, reduce loads, and ensure proper ventilation.
- Leakage: Oil leaks may result from worn seals or gaskets. Inspect and replace damaged seals, and ensure proper sealing.
- Reduced Performance: Decreased performance could be due to worn gears, damaged bearings, or misalignment. Inspect components, replace damaged parts, and realign as needed.
- Gear Wear and Tooth Damage: Wear on gear teeth can result from excessive loads or poor lubrication. Replace worn gears and ensure proper lubrication.
- Shaft Misalignment: Shaft misalignment can lead to increased wear and noise. Realign shafts using precision measurement tools.
- Lubrication Issues: Inadequate or contaminated lubrication can cause premature wear. Regularly check and replace lubricant, and use the correct type for your gearbox.
- Bearing Failure: Bearing failure may result from overload, misalignment, or inadequate lubrication. Replace worn bearings and address underlying issues.
- Seal Damage: Damaged seals can lead to leaks and contamination. Replace seals and ensure proper installation.
- Gearbox Lockup: Gearbox lockup may occur due to foreign objects or damaged components. Disassemble and inspect the gearbox, removing any obstructions and replacing damaged parts.
Regular maintenance, proper lubrication, and timely troubleshooting are key to addressing gearbox problems and ensuring smooth operation.
editor by CX 2024-05-09