Product Description
High precision planetary gearbox matched with serve motor, stepping motor are widely used.
Lowest backlash(<3'); High output torques; High efficiency(96%); Honed toothings; 22 ratios I=3, ^^512; Low noise(<65dB); Any mounting position; Easy motor mounting; Life time lubrication; Figure diameters 40, 60, 80, 120, 160mm; More options.
| size | power | voltage | frequenty |
| 60.70.8.90mm | 3.6.10.20.40W | 110.220.12V | 50/60HZ |
SPECIFICATION FOR ZDE/ZDF SERIES PLANETARY GEARBOX:
| SPECIFICATIONS | STAGE | RATIO | 40 | 60 | 80 | 120 | 160 | |
| RATED OUTPUT TORQUE | N.M | 1 | 3 | 4.5 | 12 | 40 | 80 | 400 |
| 4 | 6 | 16 | 50 | 110 | 450 | |||
| 5 | 6 | 16 | 50 | 110 | 450 | |||
| 8 | 5 | 15 | 45 | 100 | 400 | |||
| 10 | 4 | 12 | 40 | 80 | 305 | |||
| 2 | 9 | – | 40 | 100 | 210 | – | ||
| 12 | 16.5 | 40 | 100 | 210 | 700 | |||
| 15 | 16.5 | 40 | 100 | 210 | 700 | |||
| 16 | 20 | 44 | 120 | 260 | 800 | |||
| 20 | 20 | 44 | 120 | 260 | 800 | |||
| 25 | 18 | 40 | 110 | 230 | 700 | |||
| 32 | 20 | 44 | 120 | 260 | 800 | |||
| 40 | 18 | 40 | 110 | 230 | 700 | |||
| 64 | 7.5 | 18 | 45 | 100 | 400 | |||
| 3 | 60 | 16.5 | 40 | 100 | 210 | – | ||
| 80 | 20 | 44 | 120 | 260 | – | |||
| 100 | 20 | 44 | 120 | 260 | – | |||
| 120 | 16.5 | 40 | 100 | 210 | – | |||
| 160 | 20 | 44 | 120 | 260 | – | |||
| 200 | 18 | 40 | 110 | 230 | – | |||
| 256 | 20 | 44 | 120 | 260 | – | |||
| 320 | 18 | 40 | 110 | 230 | – | |||
| 512 | 7.5 | 18 | 45 | 100 | – | |||
| Scram Torque | N.m | 1,2,3 | 3-512 | 2 times of rated torque | ||||
| Rated speed | rpm | 1,2 | 3-512 | 3000 | 3000 | 3000 | 3000 | 3000 |
| Max speed | rpm | 1,2 | 3-100 | 4500 | 4500 | 4500 | 4500 | 4500 |
| Backlash | arcmin | 1 | <12 | <8 | <8 | <8 | <8 | |
| 2 | <15 | <12 | <12 | <12 | <12 | |||
| 3 | <18 | <15 | <15 | <15 | <15 | |||
| Torsional Rigidity | N.M/arcmin | 1,2,3 | 0.7 | 1.8 | 4.5 | 12 | 38 | |
| Allow radial | N | 1,2,3 | 160 | 450 | 900 | 2100 | 6000 | |
| Allow axial | N | 1,2,3 | 80 | 225 | 450 | 1050 | 3000 | |
| Efficiency η | % | 1 | ≥96% | |||||
| 2 | ≥94% | |||||||
| 3 | ≥90% | |||||||
| life | hr | 1,2,3 | 20000 | |||||
| Weight | kg | 1 | 0.4 | 0.9 | 2.1 | 6 | 18 | |
| 2 | 0.5 | 1.1 | 2.6 | 8 | 22 | |||
| 3 | 0.6 | 1.3 | 3.1 | 9.5 | – | |||
| Temperature | ºC | 1,2 | 3-100 | -25ºC~+90ºC | ||||
| Lubrication | 1,2,3 | SYNTHETIC LUBRICATING GREASE | ||||||
| Protection Grade | 1,2,3 | IP 54 | ||||||
| Assembly | Easy and simple | |||||||
| Noise( L=1M) | dB(A) | 1,2 | ≤55 | ≤58 | ≤60 | ≤65 | ≤70 | |
Company Information
FAQ
Q: What’re your main products?
A: We currently produce Brushed Dc Motors, Brushed Dc Gear Motors, Planetary Dc Gear Motors, Brushless Dc Motors, Stepper motors, Ac Motors and High Precision Planetary Gear Box etc. You can check the specifications for above motors on our website and you can email us to recommend needed motors per your specification too.
Q: How to select a suitable motor?
A:If you have motor pictures or drawings to show us, or you have detailed specs like voltage, speed, torque, motor size, working mode of the motor, needed lifetime and noise level etc, please do not hesitate to let us know, then we can recommend suitable motor per your request accordingly.
Q: Do you have a customized service for your standard motors?
A: Yes, we can customize per your request for the voltage, speed, torque and shaft size/shape. If you need additional wires/cables soldered on the terminal or need to add connectors, or capacitors or EMC we can make it too.
Q: Do you have an individual design service for motors?
A: Yes, we would like to design motors individually for our customers, but it may need some mold developing cost and design charge.
Q: What’s your lead time?
A: Generally speaking, our regular standard product will need 15-30days, a bit longer for customized products. But we are very flexible on the lead time, it will depend on the specific orders.
Please contact us if you have detailed requests, thank you ! /* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| Application: | Industrial |
|---|---|
| Speed: | Constant Speed |
| Number of Stator: | Single-Phase |
| Function: | Driving, Control |
| Casing Protection: | Closed Type |
| Number of Poles: | 2 |
| Customization: |
Available
| Customized Request |
|---|
Steps to Replace a Faulty Gearbox in an Automobile
Replacing a faulty gearbox in an automobile is a complex task that requires proper tools, skills, and safety precautions. Here are the general steps involved in the process:
- Prepare the Vehicle: Park the vehicle on a flat surface and engage the parking brake. Disconnect the battery to ensure safety during the procedure.
- Drain Fluids: Drain the transmission fluid from the old gearbox into a suitable container.
- Disconnect Components: Remove any components obstructing access to the gearbox, such as the driveshaft, exhaust system, and linkage.
- Suspend the Engine: If necessary, use an engine hoist or support to suspend the engine safely.
- Support the Gearbox: Use a transmission jack to support the weight of the gearbox.
- Remove Gearbox: Detach the gearbox from the engine by removing bolts and disconnecting the clutch or torque converter.
- Install New Gearbox: Position the new gearbox onto the engine and secure it in place with bolts.
- Reconnect Components: Reattach the driveshaft, exhaust system, and linkage that were disconnected earlier.
- Refill Fluids: Fill the new gearbox with the appropriate transmission fluid according to the manufacturer’s specifications.
- Lower Engine: Carefully lower the engine back into its original position if it was suspended.
- Test and Adjust: Start the vehicle and test the new gearbox for proper operation. Check for any leaks, unusual noises, or gear shifting issues.
- Final Check: Double-check all connections and ensure that all components are properly secured.
- Dispose of Old Fluid: Dispose of the old transmission fluid safely and responsibly.
- Dispose of Old Gearbox: Properly dispose of the old gearbox according to local regulations.
It’s important to note that gearbox replacement can vary significantly depending on the vehicle’s make and model. It’s recommended to consult the vehicle’s service manual or seek professional assistance if you’re not experienced in automotive repair.
editor by CX 2024-05-16
China high quality Transform Your Gearbox with Lightweight High-Strength Reducer Wheel differential gearbox
Product Description
The walking mechanism is a part of the chassis of a car or robot, which generally includes structures such as planetary reducers, motors, drives and wheels. The part of the walking mechanism that is directly in contact with the road surface is the wheel, which is called the wheeled walking mechanism.
Product Description
Detailed Photos
Company Profile
Certifications
Packaging & Shipping
FAQ
Q: Payment
A: Our payment is T/T, Paypal, West Union, Trade Assurance(Ali pay or E-check), L/C, and D/P.
Q: After-sale service
A: Before delivery, customers can choose on-site inspection or video inspection, export wooden box packaging, 24/7 after-sales online service, and engineers can also be arranged to provide service at the customer site.
Q: Our advantage
A:
1. Accept any customization, including appearance and LOGO.
2. Because CHINAMFG Robot is a manufacturing factory, it independently develops and produces hardware and software.
3. 24/7 after-sales service.
4. The original development software and hardware engineers online service, all problems will be restored and solved within 24 hours.
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| Feature: | High Speed, Vacuum, Antimagnetic, Cold-Resistant |
|---|---|
| Step: | Double-Step |
| Layout: | Three-Ring |
| Openness: | Open |
| Installation: | 90° |
| Transmission Form: | Gear |
| Samples: |
US$ 2000/Piece
1 Piece(Min.Order) | |
|---|
| Customization: |
Available
| Customized Request |
|---|
Common Problems with Gearboxes and How to Troubleshoot Them
Gearboxes can encounter various issues over time. Here are some common problems and troubleshooting steps:
- Noise and Vibration: Excessive noise or vibration may indicate misalignment, worn gears, or insufficient lubrication. Check alignment, inspect gears for wear, and ensure proper lubrication.
- Overheating: Overheating can be caused by high friction, inadequate lubrication, or overloading. Verify lubrication levels, reduce loads, and ensure proper ventilation.
- Leakage: Oil leaks may result from worn seals or gaskets. Inspect and replace damaged seals, and ensure proper sealing.
- Reduced Performance: Decreased performance could be due to worn gears, damaged bearings, or misalignment. Inspect components, replace damaged parts, and realign as needed.
- Gear Wear and Tooth Damage: Wear on gear teeth can result from excessive loads or poor lubrication. Replace worn gears and ensure proper lubrication.
- Shaft Misalignment: Shaft misalignment can lead to increased wear and noise. Realign shafts using precision measurement tools.
- Lubrication Issues: Inadequate or contaminated lubrication can cause premature wear. Regularly check and replace lubricant, and use the correct type for your gearbox.
- Bearing Failure: Bearing failure may result from overload, misalignment, or inadequate lubrication. Replace worn bearings and address underlying issues.
- Seal Damage: Damaged seals can lead to leaks and contamination. Replace seals and ensure proper installation.
- Gearbox Lockup: Gearbox lockup may occur due to foreign objects or damaged components. Disassemble and inspect the gearbox, removing any obstructions and replacing damaged parts.
Regular maintenance, proper lubrication, and timely troubleshooting are key to addressing gearbox problems and ensuring smooth operation.
editor by CX 2024-05-07
China supplier CZPT CZPT Heavy Truck Accessories Gearbox for Fast CZPT Truck Gearbox differential gearbox
Product Description
Product Description
|
Product Name |
Gearbox |
|
Product number |
12JS160TA |
|
Applicable model |
CHINAMFG CHINAMFG CHINAMFG CHINAMFG |
|
Warranty time |
6 months |
|
Packing quantity |
Wooden crates |
|
Delivery time |
7-15 Days |
Packaging & Shipping
Company Profile
Zhonglei Automobile Trading Co., Ltd.
Established in 2009. Has been a leading supplier of new and used trucks, truck parts and semi-trailers for over 15 years. Headquartered in HangZhou, ZheJiang Province, the company has a strong reputation in the automobile trading industry, serving both domestic and international customers.
We offer a diverse range of products to meet the needs of a wide variety of industries.
Our comprehensive inventory includes:
New and Used Trucks: We specialize in providing new and used trucks for construction purposes or reliable transportation vehicles for logistics operations.
Truck Parts: We recognize the importance of vehicle maintenance and repair, which is why we source a full assortment of truck parts from reputable manufacturers.
Semi-trailers: Our selection of semi-trailers meets a variety of transportation needs, including flatbeds, refrigerated trailers and dry van trailers.
Our Partner
Our Advantages
1. All parts are brand new and have been 100% professionally tested.
2. Our customer service is online 24 hours.
3. Our technicians have more than 10 years of work experience.
4. Free video or phone installation instructions.
5. After shipping, we will track the product for you every 2 days until you receive the product.
6. When you get the goods, test them and give me feedback. If you have any questions about the product, please contact us and we will provide you with a solution.
FAQ
1. What does our company specialize in?
We are a company specializing in exporting new and used trucks, truck parts, and semi-trailers. We offer a wide range of vehicle options to meet various customer needs and budgets.
2. What types of trucks can we provide?
Our product range covers various types of trucks, including but not limited to cargo trucks, trailers, dump trucks, tow trucks, flatbed trucks, and more.
3. What truck brands do we offer?
We collaborate with multiple CHINAMFG truck brands, including MAN, Mercedes-Benz, DAF, among others.
4. Do we offer used trucks?
Yes, we provide certified used trucks in addition to brand new ones. These used trucks undergo rigorous inspection and maintenance to ensure their quality and performance.
5. What truck parts can we provide?
We supply a wide range of truck parts, including engine components, brake systems, tires, lighting equipment, body parts, and more. Whatever parts you need, we can provide them.
6. What types of semi-trailers do we offer?
We offer various types of semi-trailers, including flatbed trailers, box trailers, refrigerated trailers, tanker trailers, and more, to meet different transportation needs.
7. How can orders be placed?
You can place orders through our official website or by directly contacting our sales team. Our sales team is dedicated to providing you with consultation and support to ensure smooth order processing.
8. Do our products meet international quality standards?
Yes, all our products meet international quality standards and have undergone relevant certifications. We are committed to providing customers with high-quality products and excellent service.
9. What about transportation and delivery?
We work with reliable logistics partners to ensure safe and timely delivery of your orders to the destination. We offer flexible transportation options to meet your needs.
10. What is our after-sales service policy?
We provide comprehensive after-sales service support, including product warranties, maintenance, and repair service.
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| After-sales Service: | Video Technical Support, Online Support |
|---|---|
| Warranty: | 6 Months |
| Type: | Gearbox |
| Samples: |
US$ 850/Piece
1 Piece(Min.Order) | Order Sample |
|---|
| Customization: |
Available
| Customized Request |
|---|
.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}
|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
|---|
| Payment Method: |
|
|---|---|
|
Initial Payment Full Payment |
| Currency: | US$ |
|---|
| Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
|---|
Is it Better to Repair or Replace a Damaged Gearbox?
Deciding whether to repair or replace a damaged gearbox depends on several factors and considerations:
- Extent of Damage: Assess the severity of the gearbox damage. Minor issues like worn bearings or seals may be repairable, while extensive damage may necessitate a replacement.
- Cost of Repair: Compare the cost of repairing the gearbox to the cost of replacing it with a new or remanufactured unit. In some cases, repairs might be more cost-effective.
- Availability of Parts: Availability of replacement parts for the gearbox can influence the repair option. If parts are hard to find, replacement might be a more viable choice.
- Age and Condition: Consider the age and overall condition of the vehicle. If the vehicle is older and nearing the end of its lifespan, a replacement gearbox might offer better long-term reliability.
- Performance and Efficiency: A new or remanufactured gearbox might offer improved performance and efficiency compared to a repaired one.
- Future Maintenance: Evaluate potential future maintenance needs of both repair and replacement options. A replacement gearbox might come with a warranty and require less frequent maintenance.
- Professional Assessment: Seek advice from a qualified mechanic or technician who can thoroughly assess the gearbox and provide recommendations based on expertise.
Ultimately, the decision to repair or replace a damaged gearbox should be based on a careful evaluation of these factors. It’s recommended to consult with professionals to make an informed choice that best suits your specific situation and budget.
editor by CX 2024-04-15
China Good quality Heavy Truck Spare Parts CZPT CZPT JAC, Jmc, CZPT Transmission Gearbox differential gearbox
Product Description
Product Description
Overview
Compatible vehicles
| Car Fitment | Model | Year |
|---|---|---|
| SINOTRUK (CNHTC) | Heavy Truck Spare Parts 9js150t-B JAC, Jmc, CHINAMFG Transmission Gearbox | 2 |
|
Serial No |
80032003 |
|
|
Total Ratio |
0.84-13.8 |
|
|
Speed Ratio |
IMP/U 6,00 |
|
|
Oil Capacity(L) |
15.5 |
|
|
Oil Grade See Lubric. List |
02 |
|
|
Quality |
High-Quality |
|
|
Packing |
Customers’ Requirement |
Packaging & delivery
Package Type:
According to international export standards or customized according to your requirements
Supply Ability
Supply Ability
1000 Piece/Pieces per Month
Detailed Photos
Product details
n
Company Profile
ZheJiang Yontan Import and Export Co., Ltd. was established in HangZhou, the capital of ZheJiang Province, a famous national historical and cultural city with profound heritage. The company is mainly engaged in the export of complete vehicles of SINOTRUC, HOWO, SHACMAN, FOTON, FAW, XIHU (WEST LAKE) DIS., XIHU (WEST LAKE) DIS.FENG and other brands. It is engaged in the export sales of a full range of truck accessories and assemblies. The products distributed by the company are mainly supplied to major domestic transportation units, oil and gas transportation teams, municipal engineering fleets and civil engineering fleets, as well as major foreign construction companies and transportation companies.
On the basis of the continuous development of the company’s business, we are committed to exploring the international market. So far, our market has covered China, Eastern Europe, the Middle East, Africa, Southeast Asia, South America and other countries and regions. Our integrity is everywhere and we are deeply trusted by customers. Our company has a large warehouse and a professional management team, which can quickly find suitable parts for customers, and can provide services such as good packaging, safe storage, and fast transportation to meet the diverse needs of customers at any time.
The company adheres to the concept of “integrity, CHINAMFG and sustainable”, and sincerely welcomes customers to come to our company to discuss business cooperation.
Company Profile
Certifications
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| After-sales Service: | 24h Full Technical Support |
|---|---|
| Warranty: | 12 Months |
| Type: | Gearbox |
| Certification: | ISO9001 |
| Driving System Parts: | Gearbox |
| Electrical System Parts: | Gearbox |
| Customization: |
Available
| Customized Request |
|---|
How to Calculate Gear Ratio in a Gearbox
Gear ratio is a fundamental parameter in a gearbox that represents the ratio of the number of teeth between two gears. It determines how much the output gear rotates in relation to the input gear. The formula to calculate gear ratio is:
Gear Ratio (GR) = Number of Teeth on Output Gear / Number of Teeth on Input Gear
Here’s a step-by-step guide on how to calculate gear ratio:
- Identify the input and output gears in the gearbox.
- Count the number of teeth on the output gear (the gear connected to the output shaft).
- Count the number of teeth on the input gear (the gear connected to the input shaft).
- Plug the values into the gear ratio formula: GR = Number of Teeth on Output Gear / Number of Teeth on Input Gear.
- Calculate the gear ratio by performing the division.
The gear ratio provides insight into how much the input gear needs to rotate to achieve a certain rotation of the output gear. It influences torque, speed, and direction of rotation in the gearbox.
editor by CX 2024-04-10
China Custom Brush Cutter Trimmer Replace Gear Head Gearhead Gearbox Brushcutter Accessories Lawn Mower Gear Head differential gearbox
Product Description
Detailed Photos
Company Profile
HangZhou Fossil Tools Co,.Ltd Is Located At 102 East Huacheng Road,Xihu (West Lake) Dis. District,HangZhou City.ZHangZhoug Province.We Are Close To Yimu And HangZhou,and Also Close To HangZhou Port.
We Mainly Provide A Variety Of Garden Tools Spare Parts,Such as Gasoline And Electric Engine,Brush Cutter ,Hedge Trimmer,Chain Saw,Lawn Mower Series And So On.
For Spare Parts,We Have Wide Range Of Different Quality Level Suppliers,Customized Size And Design Are Available.Our Products Sales To South Asia,Europe,Middle East,America ,Each Part Of The World!
Looking CHINAMFG To Have A Visiting Of Our Company!
About US:
1. Established In 2006.
2.Started Producing Scooter Parts In 2007.
3.Registered Brand :YINGKE. In 2008.
4.Started Producing Brush Cutter Parts In 2008.
5.Annual Turnover Up To 100,000,000 RMB In 2015.
6.Moved To New Factory In HangZhou In 2018.
7.Found Fossil Tools Co.,Ltd In 2571.
8.Fossil Tools Co.,Ltd Moved To HangZhou In 2571.
FAQ
1.
Q: How about Get Sample?
A:We need get the sample fee first,and we will refund the sample fee after your first PI.
2.
Q:How about Delivery time?
A:Generally,we will delivery in 12~25 days or less after receive the deposit.
3.
Q :Can I visit your company?
A:Yes,Of course, We are near by HangZhou,about 1 hours driving.you can also by high-speed railway to HangZhou South Station,we will pick you up at the station.
4.
Q: Which Port do you ship ?
A:Our factory is clost to HangZhou port, we can also walk to ZheJiang port,as your request.
| Certification: | ISO |
|---|---|
| Power Source: | Gasoline |
| Type: | Chainsaw |
| Material: | Aluminum |
| Model Number: | Brush Cutter Working Head |
| Brand Name: | Fossil |
Benefits of Regular Gearbox Maintenance
Regular maintenance of gearboxes offers numerous advantages:
- Extended Lifespan: Proper maintenance helps prevent premature wear and breakdown, increasing the gearbox’s overall lifespan.
- Reduced Downtime: Regular inspections and maintenance can identify issues early, minimizing unplanned downtime for repairs.
- Improved Efficiency: Well-maintained gearboxes operate more efficiently, leading to energy savings and optimized performance.
- Cost Savings: Routine maintenance reduces the need for costly major repairs or replacements.
- Enhanced Safety: Regular maintenance ensures safe operation by addressing potential hazards and malfunctions.
- Optimal Performance: Properly maintained gearboxes deliver consistent and reliable performance for machinery and equipment.
- Preserved Functionality: Maintenance prevents issues that could lead to reduced functionality or complete failure.
- Reduced Environmental Impact: Well-maintained gearboxes consume less energy and minimize waste, contributing to sustainability efforts.
- Compliance: Regular maintenance helps meet industry regulations and standards for equipment safety and performance.
Implementing a proactive maintenance plan can provide these benefits and contribute to the overall success of your machinery and operations.
editor by CX 2023-12-04
China OEM CZPT Series Helical Parallel Shaft Gearbox with Thrust Box for Plastic Extruding Machine Reducer Gearbox for Extruder differential gearbox
Product Description
Products Description
Introduction:
Power range:5.5-200KW
Transmission ration range:8-35
Output torque(Kn.m):top to 42
Advantages:
Highly Standard Modular Designed
Quality material ensures the product reliability
High Strength,Compact Dimension
Long Service Life
Low Noise
High Efficiency
Large radial loading ability
Axial load ability of up to 5% of radial load
Technical Parameters
Packing and shipping
Our certificate
Customer visit
Company Profile
HangZhou HangZhoun Machinery Co., Ltd. is a professional machinery manufacturing enterprise, with 20 years of experience in the field of machinery manufacturing and the ability of independent research and development. Our products rely on advanced technology, reliable quality, excellent prices to win the trust of customers. The products are sold to more than 50 countries all over the world, and have a good cooperative relationship with customers. Our products enjoy a one-year warranty service for major parts, and our 24-hour technical team provides customer service.
| Application: | Machinery |
|---|---|
| Function: | Speed Changing, Speed Reduction, Speed Increase |
| Layout: | Cycloidal |
| Hardness: | Hardened Tooth Surface |
| Installation: | Horizontal Type |
| Step: | Three-Step |
| Customization: |
Available
| Customized Request |
|---|
What is a Gearbox and How Does It Work?
A gearbox is a mechanical device that transmits power and changes the speed or torque of a rotating input shaft to a different output shaft. It is commonly used in various machines and equipment to control the speed and direction of motion.
Here’s how a gearbox works:
- Input Shaft: The gearbox receives rotational energy from an input shaft connected to a power source, such as an electric motor or an engine.
- Gears: Inside the gearbox are a set of gears with different sizes. These gears mesh with each other, and their arrangement determines the gear ratio, which defines how many revolutions the output shaft will make for a given rotation of the input shaft.
- Output Shaft: The output shaft is connected to the machinery or equipment that needs to be powered. As the gears rotate, the motion and power are transmitted from the input shaft to the output shaft.
- Gear Ratio: By selecting different gear combinations, the gearbox can change the speed and torque of the output shaft. A higher gear ratio results in higher torque and lower speed, while a lower gear ratio provides higher speed and lower torque.
Gearboxes play a crucial role in various applications, including automobiles, industrial machinery, robotics, and more, enabling efficient power transmission and speed control.
editor by CX 2023-12-01
China Custom Diesel D7d Engine Exyernal Cabin Gearbox Ass Xc90 V40 S40 V60 Xc90 2008/2006 Truck Spare Parts 20760512 Sliding Sleeve for CZPT Truck Accessories differential gearbox
Product Description
Cabin:
The cabin where the driver commands and manipulates the ship.The cab is 1 of the most important parts of the truck, and its design will directly affect the performance and safety of the truck.
Popular Accessories:
Exterior Rearview Mirror, Headlight Assembly, Wind Xihu (West Lake) Dis. Cover Outer Panel Assembly, Fender Ass, Ventilation Hood, Cab Front Suspension Cover, Anti-skid Plate, Limit Block Ass, Window Glass Lifter , Window Glass Chute , Wiper Arm,Damper, Elastic Retaining Ring, Wiper Blade, Intercooler Assembly, Oil Cylinder, Radiator Assembly, Intercooler Assembly, ABS Sensor , Expansion Tank Assembly, Side Marker Light ,Functional Combination Taillight Assembly, Oil Injection Nozzle Assembly, Fuel Combination Unit, Bumper
Engine:
Also known as the heart, is the power source of the truck, and an important part of the truck.
Popular Accessories:
Crankshaft, connecting rod, cylinder block, cylinder head, piston,flywheel, cylinder liner,piston ,piston rings, piston pin,connecting rod,bearing, crankshaft bearing ,intake&exhaust valve, valvesprings,camshaft, tappets, camshafts bearing, fuel tank, fuel pump, fuel filter,air filter, oil filter, battery,alternator, starter, starter motor, ignition coil,water pump, radiator, fan couplings, fan, thermostat, oil pump,pressure limiting valve ..
Gearbox :
It is a gearbox that changes the ratio and direction of motion. It is located between the clutch and the central drive.
Popular Accessories:
Transmission Case, Main Shaft, Countershaft, Gear Sleeve, Gear Seat, SYNCFRO Ring, Gasket, Rocker, Connecting Rod, Connecting Rod Joint, Select Cable, Release Bearing etc,reverse gear ,synchronize assembly, synchronizer slider,gearbox ,gearbox shell, gearbox cover, gearbox middle cover, shift fork assembly, PTO…
ED
Axle:
Is a bridge-type structure connected to the body suspension and capable of mounting wheels at both ends. It plays the role of weight bearing, guiding, ensuring the driving force and stability of the vehicle in the truck.
Popular Accessories:
Brake Chamber, Brake Shoe, Adjusters,Brake Drum, Front Wheel Hub, Final Drive Assy., Differential, Adjusting Shim, Axle Shaft Gear, Planet Gear, Drive Shaft etc.
| Parts Number | Name |
| 2076571 | sliding sleeve |
| 2076571 | engine ring |
| 8171737 | synchronizer cone |
| 16532224 | engine ring |
| 1653921 | engine ring |
| 21141850 | repair kit |
| 20588775 | sliding sleeve |
| 1653956 | synchronizer cone |
| 2 0571 492 | glide sleeve |
| 1653961 | synchronizer cone |
| 1669352 | engine ring |
| 20967830 | bearings kit |
| 276115 | repair kit planetary |
| 21036050 | bearings |
| 20967830 | bearings |
| head lamp | |
| head lamp | |
| 21297918 | fog light |
| 21297917 | fog light |
| 21094284 | mud guard |
| 2571483 | oil cooler gasket |
| 2132218 | repair kit for compressor |
| 21267056 | repair kit for compressor |
| 20845004 | compressor head |
| 2571341 | fuel pump |
| 3986433 | center rod |
| 8148997 | hunp pump |
| 2 0571 712 | range cylinder |
| 20383071 | air horn |
| 1676481 | inter cooler pipe |
| 276315 | gear knob |
| 2571849 | frame LHD |
| 2571848 | frame RHD |
| 82491908 | lower grille |
| 84033228 | front grille |
| 84571588 | panel |
| 1 0571 55 | synchronizer cone |
| 1 0571 53 | synchronizer cone |
| 8171737 | synchronizer cone |
| 1521878 | engine ring |
| 1608N27001 | BOOSTER |
| 16N57165 | CLUTCH RELEASE |
| 1606060K5711 | Clutch rear hose |
| 165711Z64D0 | CLOTH MAIN PUMP |
| 1700N301 | TOP COVER |
| 17N 0571 1 | CONTROL ROD-RETAINER |
| 17N5710B | ROTULE |
| 17N5715B | ROTULE D. |
| HEX NUT | |
| 29N57183 | SUB SPRING PLATE |
| Q150B1032 | BOLT |
| 29N57154 | SPRING PIN LOCATION BOLT |
| 29N57185 | REAR SCHACKLE WITH SLEEVE ASSY |
| 29N57105 | WASHER REF |
| 29N01249 | FIXING END SUPPORT FRONT |
| 29N57149 | FIXING END BRACKET REAR |
Company brief introduction:
We are established in 2571. The company is located in HangZhou City, ZheJiang Province, where CHINAMFG is located.Sincere to the customer and in good faith of quality is Deruna Heavy Truck Parts forever followed motto. It’s the basement to be a human and do business. We take all responsibility for our products and service sincerely.
Main product:
Our company specializing in the manufacturing and wholesale of China National Heavy Duty Truck, ZheJiang Heavy Duty Truck, Beiben truck, CHINAMFG truck and its related accessories. We mainly engage in various accessories products such as truck parts, cylinder blocks, crankshafts, diesel engines.
1.Power parts, including engines and peripheral parts [such as starters, generators, superchargers, various filter elements, etc.
2. Driving Part [also called transmission part], including clutch, gearbox, transmission shaft, axle, etc.;
3. Suspension part, including front and rear steel plates and fasteners, balance shaft, thrust rod, etc.
4. Steering part, including steering gear and Horizontal pull rods, etc.
5. Electrical appliances and valve parts, including various types of electrical switches, wiring harnesses, bulbs, and various braking components (valves).
6. Control and cargo parts, namely cab and cargo compartment.
7. Frame [that is, the beam] and so on.
Overseas market at present:
Our sales have averaged over 10 years of experience in exporting, and are proficient in all processes of business operation which can efficiently fulfill customer needs.
We currently export to 37 countries, and the client partners from Russia, New Zea-
land, Fiji, Papua New Guinea, Malaysia, Zambia, South Sudan, United Arab Emirates, Zimbabwe, Colombia and so on. We can also help you to supply registration docu-
ments of the importing in different countries. Welcome new and regular customers to contact us to establish future business relationships and achieve common success!
Q: What if I can not provide part number for reference?A: If no part number, we can judge and quote the requested parts by engine name-plate or photos;
It would be great if you could provide us with the chassis number(VIN) so that we can provide a more comprehensive analysis and accurate quote feedback based on your truck model.
Q: Can we buy 1 pcs of truck parts for quality testing?A: Yes, we are glad to send 1pcs item for quality testing if we have the truck parts of you need in stock.
Q: Do you test all your goods before delivery?A: Yes, we have 100% test before delivery.
Q: How do you make our business long-term and good relationship?A: We keep good quality and competitive price to ensure our customers benefit;
We respect every customer as our friend and we sincerely do business and make friends with them, no matter where they come from.
Q: How long is the production time of the goods?A: We have sufficient stock of regular specifications for immediate delivery; Non-conventional specifications generally require stocking for about 7-10 days; Large quantities order need to be in stock for about 15-20 days.
Q: What is the packing?A: Neutral packing of paper carton or wooden case. Or we customize the packaging according to your requirements
| After-sales Service: | 24 Online Service |
|---|---|
| Warranty: | Standard |
| Type: | Truck Parts |
| Certification: | ISO9001 |
| Driving System Parts: | Front Axle |
| Electrical System Parts: | Starting System |
| Samples: |
US$ 100/Piece
1 Piece(Min.Order) | |
|---|
| Customization: |
Available
| Customized Request |
|---|
Is it Better to Repair or Replace a Damaged Gearbox?
Deciding whether to repair or replace a damaged gearbox depends on several factors and considerations:
- Extent of Damage: Assess the severity of the gearbox damage. Minor issues like worn bearings or seals may be repairable, while extensive damage may necessitate a replacement.
- Cost of Repair: Compare the cost of repairing the gearbox to the cost of replacing it with a new or remanufactured unit. In some cases, repairs might be more cost-effective.
- Availability of Parts: Availability of replacement parts for the gearbox can influence the repair option. If parts are hard to find, replacement might be a more viable choice.
- Age and Condition: Consider the age and overall condition of the vehicle. If the vehicle is older and nearing the end of its lifespan, a replacement gearbox might offer better long-term reliability.
- Performance and Efficiency: A new or remanufactured gearbox might offer improved performance and efficiency compared to a repaired one.
- Future Maintenance: Evaluate potential future maintenance needs of both repair and replacement options. A replacement gearbox might come with a warranty and require less frequent maintenance.
- Professional Assessment: Seek advice from a qualified mechanic or technician who can thoroughly assess the gearbox and provide recommendations based on expertise.
Ultimately, the decision to repair or replace a damaged gearbox should be based on a careful evaluation of these factors. It’s recommended to consult with professionals to make an informed choice that best suits your specific situation and budget.
editor by CX 2023-10-03
China Professional China Advance Marine Gearbox 40A for Fishing Boat differential gearbox
Product Description
Advance Marine Gearbox 120C hydraulic marine gearbox hydraulic marine gearbox
* Felxible -can be customerized according to customer’s request, drawing will be submitted for approval. Such as taking off radiator and replacing with the heat exchanging system, total power solution such as gear box coupling and canopy design.
*Durability- With engines have been engineered to meet the durability and performance needs of marine applications and seawater cooling options and controls seamlessly integrated to ensure the propulsion for your vessel meets your needs.
* Long-Life Expectancy – these critical parts are manufactured by leading companies, other part comes from reliable manufacturers, these sets guarantee long functional life, outstanding performance, and high efficiency.
* Easy availability of the spare parts — the key parts are same as parts for vehicle diesel engine,better exchange and universality and durable.
* Easy maintenance -Diesel engine not require heavy maintenance. It is very easy, safe, and simple to use. Well-planned and preventive maintenance measures are generally available for these sets which are also low in cost.
Product Description
HangZhou ADVANCE HCT1100 Gearbox
HangZhou ADVANCE produces the best gearbox in China.
1100 series marine gearboxes have the functions of reversing, clutching, decelerating and bearing propeller thrust.
The series gearboxes have the features of compact structure, large speed ratio range, large load capacity, large thrust bearing, easy disassembly and maintenance, etc.
Product Parameters
| Input Speed | 700~1800r/min | ||
| Reduction Ratio (i) | 4.94,5.60,5.98,6.39 | Transmission Capacity (kW/r/min) | 0.846 |
| 6.85 | 0.835 | ||
| 7.35 | 0.772 | ||
| 7.9 | 0.736 | ||
| Maneuver Type | Push-pull flexible Shaft , Electric control , Pneumatic control | ||
| Center Distance | 500mm | ||
| Rated Thrust | 150KN | ||
| L×W×H | 1150*1350*1547mm | ||
| Net Weight | 3000kg | ||
| Coupling Flywheel | Matched by flywheel | ||
| Coupling Housing | No housing | ||
Product Configuration
CUSTOMIZE YOUR MACHINE
Oil Pressure Gauge and Alarm Device
Oil Temperature Gauge and Alarm Device
SAE Flywheel Housing Options
Hydraulic Pressure Low Alarm
Solenoid Controlled Switch
…….
CONTACT US FOR MORE DETAILS YOU NEED!
Company Profile
HangZhou LionHeart Power Equipment Co., Ltd., a subsidiary of 1 of the nation’s top marine services company —- HangZhou Agricultural Machinery Co., Ltd., is a provider of marine equipment worldwide. Our company is committed to providing the best solution to our customer’s project since 1996. With over 20 years of profound experience in the marine services industry, our company has set up a professional and customer-friendly system in our every pre-sales, shipping and after-sales process to ensure your worry-free shopping experience. We ship our brand-new products all over the world, at the best prices on the Web.
LionHeart Power is a professional provider for equipment like marine engines, generators, gearboxes, propellers, marine interior fit-out, deck machinery and related marine spare parts. Our processes and procedures are designed to present the perfect product that will meet or exceed the expectations of every 1 of our customers. We back up that commitment with comprehensive services through the product’s whole life cycle, along with our key technologies and leading product expertise. That is the reason why we stand out as the nation’s marine equipment sales champion of multiple brands for over 10 consecutive years.
LionHeart Power carries 1 of the nation’s largest inventories of marine equipment and related parts from 20+ manufacturers such as Weichai, HangZhou Advance, Deutz, Steyr, Zichai, CHINAMFG and more, among which the CHINAMFG and ADVANCE series are fully covered. Specifically, that inventory is meticulously organized over 57 acres outside and 118, 000 sq. FT. Of warehouse under roof. That means our products are generally in stock for immediate availability. Besides, we are proud of our resource plHangZhou system of products, which is unparalleled in the industry, offering you the shortest lead time and efficient service.
LionHeart Power’s staff is expertly trained not only to quickly locate the products you’re looking for, but also to meet your project requirements with the best solution. If what you are looking for is not ‘on the shelf’, we will customize it for you. This strength builds CHINAMFG our CHINAMFG partnership with various manufacturers and production institutes. Efficiency and service are the goals of every member of our organization. LionHeart Power knows your time is valuable and we produce this value for you. Quality equipment and expertly-trained service technicians, combined with our extensive inventory, give you the edge in your commercial and industrial success.
Quality is our culture all the engines will be tested before leaving the factory We are proud to say that in our years of international trading experience. we never had a single order returned to us, For all our clients, you will receive exactly what you ordered, and you will receive it on time and we live by the principle that customer comes first
Certifications
Packaging & Shipping
FAQ
1.Processing
Orders are usually packed and ready to ship in 1 to 3 business days if the products are in stock. However shipments are subiect to required manufacturing time and customs clearance procedures. which can cause delays beyond original delivery estimates. For detailed delivery information, please contact customer service.
2.Packing Methods
Normally we use wooden boxes for packaging or we can pack it according to your special needs.
3.Shipping Methods
We are happy to offer a variety of shipping methods. Shipping methods available: EXW. FOB.CER. CIF.
4. International Returns & Exchanges
Unfortunately we can’t accept retums on intemational orders. We will test each product before dellverv One-year manufacturer warranty is quaranteed on our complete machines and 3 months on spare parts. I1 you have any concerns with your order, please reach out to customer service
5.Payment Methods
We sugqest 50/50 T/T payment method: 50 percent down payment on placement of the order, with the remaining 50% due CHINAMFG shipment. We also accept L/C, Trade Assurance, Visa transfer and Paypal
| Application: | Machinery, Marine |
|---|---|
| Function: | Distribution Power, Clutch, Change Drive Torque, Change Drive Direction, Speed Changing, Speed Reduction, Speed Increase |
| Certificate: | CCS |
| Transport Package: | Wooden Box |
| Specification: | 1150*1350*1547mm, 3000kg |
| Trademark: | Hangzhou Advance |
Steps to Replace a Faulty Gearbox in an Automobile
Replacing a faulty gearbox in an automobile is a complex task that requires proper tools, skills, and safety precautions. Here are the general steps involved in the process:
- Prepare the Vehicle: Park the vehicle on a flat surface and engage the parking brake. Disconnect the battery to ensure safety during the procedure.
- Drain Fluids: Drain the transmission fluid from the old gearbox into a suitable container.
- Disconnect Components: Remove any components obstructing access to the gearbox, such as the driveshaft, exhaust system, and linkage.
- Suspend the Engine: If necessary, use an engine hoist or support to suspend the engine safely.
- Support the Gearbox: Use a transmission jack to support the weight of the gearbox.
- Remove Gearbox: Detach the gearbox from the engine by removing bolts and disconnecting the clutch or torque converter.
- Install New Gearbox: Position the new gearbox onto the engine and secure it in place with bolts.
- Reconnect Components: Reattach the driveshaft, exhaust system, and linkage that were disconnected earlier.
- Refill Fluids: Fill the new gearbox with the appropriate transmission fluid according to the manufacturer’s specifications.
- Lower Engine: Carefully lower the engine back into its original position if it was suspended.
- Test and Adjust: Start the vehicle and test the new gearbox for proper operation. Check for any leaks, unusual noises, or gear shifting issues.
- Final Check: Double-check all connections and ensure that all components are properly secured.
- Dispose of Old Fluid: Dispose of the old transmission fluid safely and responsibly.
- Dispose of Old Gearbox: Properly dispose of the old gearbox according to local regulations.
It’s important to note that gearbox replacement can vary significantly depending on the vehicle’s make and model. It’s recommended to consult the vehicle’s service manual or seek professional assistance if you’re not experienced in automotive repair.
editor by CX 2023-10-01
China high quality Hydrostatic Planetary Transmission Winch Gearbox for Crane differential gearbox
Product Description
Product Description
Planetary speed reducer
The planetary speed reducer & gearbox is a kind of transmission mechanism. It utilizes the speed transducer of the gearbox to reduce the turnover number of the motor to the required 1 and obtain a big torque.
Planetary speed reducer applications
Planetary speed reducers & gearboxes have a lot of advantages, like small size, light weight, high load capability, long service life, high reliability, low noise, large output torque, wide range of speed ratio, high efficiency and so on. Besides, the planetary speed reducers gearboxes are easy and convenient for installation and suitable for AC/DC,hydraulic motors etc.
planetary gearboxes are applicable to the lifting transport, engineering machinery, metallurgy, mining, petrochemicals, construction machinery, light and textile industry, medical equipment, instrument and gauge, automobile, ships, weapons, aerospace and other industrial sectors.
Gear Reducer advantages:
1.High speed ratio and high efficiency
2.Compact structure, small volume
3.Low running noise and low noise.
4.Reliable use, long life
5.Reasonable design, convenient maintenance, easy decomposition and installation
Detailed Photos
Product Parameters
| max output torque N.M | Max single wire rope pulling force N | gear ratio | brake torque N.m | hydraulic motor | input rotation speed Rpm | weight(kgs) |
| 3136 | 14500 | 21.5 | 190 | A2F56W6.1Z2 | 3200 | 160 |
| 5186 | 30000 | 30.3 | 296 | A2F63W2Z2 | 3200 | 160 |
| 11500 | 50000 | 37.6 | 460 | a2f80w2z | 3200 | 115 |
| 18000 | 90900 | 26.4/36.8 | 507 | a2fe55/63-vzl | 3200 | 165 |
| 26000 | 118000 | 67/78.8 | 710 | a2fe55/61w-vzl | 3200 | 155 |
| 27000 | 120000 | 35.46/41 | 790 | a2fe107/61w-vzl | 3200 | 115 |
| 10000 | 208000 | 128.6/147 | 1133 | a2fe16/61w-vzl | 3200 | 440 |
workshop
WInch gearbox reducer packing:
shipping to HangZhou port
other gearbox and dynamic compator we produced
Certifications
FAQ
1.are you trading company or manufactory?
we have our own factory,the company is our export department of our factory.but it is independent accounting unit from our factory and specilizes in exporting business.
2.what is your payment mode?
we can accept LC sight or 30% deposit,balance before shipment.or negotiation.
| Application: | Machinery, Marine, Agricultural Machinery |
|---|---|
| Hardness: | Hardened Tooth Surface |
| Installation: | Horizontal Type |
| Layout: | Coaxial |
| Gear Shape: | Cylindrical Gear |
| Step: | Three-Step |
| Samples: |
US$ 2000/Piece
1 Piece(Min.Order) | |
|---|
| Customization: |
Available
| Customized Request |
|---|
What is a Gearbox and How Does It Work?
A gearbox is a mechanical device that transmits power and changes the speed or torque of a rotating input shaft to a different output shaft. It is commonly used in various machines and equipment to control the speed and direction of motion.
Here’s how a gearbox works:
- Input Shaft: The gearbox receives rotational energy from an input shaft connected to a power source, such as an electric motor or an engine.
- Gears: Inside the gearbox are a set of gears with different sizes. These gears mesh with each other, and their arrangement determines the gear ratio, which defines how many revolutions the output shaft will make for a given rotation of the input shaft.
- Output Shaft: The output shaft is connected to the machinery or equipment that needs to be powered. As the gears rotate, the motion and power are transmitted from the input shaft to the output shaft.
- Gear Ratio: By selecting different gear combinations, the gearbox can change the speed and torque of the output shaft. A higher gear ratio results in higher torque and lower speed, while a lower gear ratio provides higher speed and lower torque.
Gearboxes play a crucial role in various applications, including automobiles, industrial machinery, robotics, and more, enabling efficient power transmission and speed control.
editor by CX 2023-09-13
China supplier Motorized Tricycle 200cc 250cc 300cc Engine Parts Reverse Gear Three Wheels Motorcycle Reverse Gearbox differential gearbox
Product Description
| Advantage: |
There is no doubting the quality of this engine reverse gearbox.We are had years of in-depth cooperation with Zongshen, Loncin, CZPT and other enterprises, and has also established its own quality control department to ensure product quality for customers. We have 20 years` experience which can share you the best goods with reasonable price. We have more than 200 engineer who can match your demand of goods. we have enough equipment and capacity to deal with your order quantity. We have the best technology support and satisfactory after-sale service.
| Detailed Photos |
| Packing & Delivery |
Standard Carton Package or OEM is accepted
| Our Building & Office |
| Company Profile |
HangZhou CZPT Trading Co., Ltd offers variety of products which can meet your multifarious demands. We adhere to the management principles of “quality first, customer first and credit-based” since the establishment of the company and always do our best to satisfy potential needs of our customers. Our company is sincerely willing to cooperate with enterprises from all over the world in order to realize a CZPT situation since the trend of economic globalization has developed with anirresistible force.
If you have any questions, please feel free to contact us. Awaiting your early and favorable inquiry.
| FAQ |
Q1. Why choose Bawo?
A. Because of 3 points, First, We have 20 years experience which can share you the best goods with reasonable price. Second, We have more than 200 engineer who can match your demand of goods. The last, we have enough equipment and capacity to deal with your order quantity.
Q2. How can you promise for quality?
A. We have Quality Control Department, will 100% testing and inspecting the quality of products before leaving factory.
Q3. How to ensure your engine is genuine?
A. Our Engine and CZPT spare parts are from the original factory, each 1 has a special identification certification, and We only do long term business.
Q4. What product do you have?
A. We are product tricycle, engine, spare parts, and we also can provide motorcycle, tyre, and engine oil.
Q5. When can I get the quotation?
A. We usually quote you within 24 hours after we get your inquiry. If you are very urgent to get the quotation.Please call us or tell us in your mail, so that we could regard your inquiry priority.
Q6. How about after-sales service?
A. We supply replacement parts, technical support and satisfactory after-sale service.
Q7. Could I get the sample?
A. Yes of couse, we are confident to share you sample which you will know it can help you win the market.
Q8. Could I customize the product?
A. Yes of couse, We really enjoy working with clients with ideas.
Q9. What is your terms of payment?
A. Our terms is 30% of deposit before production, then 70% of balance before shipment.
Q10. How do you make our business long-term and good relationship?
A1. We will keep in touch with you of the market situation, according to your feedback, we will update, improve and adjust the best price to help you open up the market and expand your business. A2. We will focus to our key customers, To plHangZhou regular visits and cooperating with them to visit their customers together. A3. We will regularly give our promotional materials to deepen customer’ impression.
|
Shipping Cost:
Estimated freight per unit. |
To be negotiated |
|---|
| Certification: | CCC |
|---|---|
| Standard Component: | Standard Component |
| Technics: | Forging |
| Samples: |
US$ 16/Piece
1 Piece(Min.Order) | Order Sample |
|---|
| Customization: |
Available
| Customized Request |
|---|
Steps to Replace a Faulty Gearbox in an Automobile
Replacing a faulty gearbox in an automobile is a complex task that requires proper tools, skills, and safety precautions. Here are the general steps involved in the process:
- Prepare the Vehicle: Park the vehicle on a flat surface and engage the parking brake. Disconnect the battery to ensure safety during the procedure.
- Drain Fluids: Drain the transmission fluid from the old gearbox into a suitable container.
- Disconnect Components: Remove any components obstructing access to the gearbox, such as the driveshaft, exhaust system, and linkage.
- Suspend the Engine: If necessary, use an engine hoist or support to suspend the engine safely.
- Support the Gearbox: Use a transmission jack to support the weight of the gearbox.
- Remove Gearbox: Detach the gearbox from the engine by removing bolts and disconnecting the clutch or torque converter.
- Install New Gearbox: Position the new gearbox onto the engine and secure it in place with bolts.
- Reconnect Components: Reattach the driveshaft, exhaust system, and linkage that were disconnected earlier.
- Refill Fluids: Fill the new gearbox with the appropriate transmission fluid according to the manufacturer’s specifications.
- Lower Engine: Carefully lower the engine back into its original position if it was suspended.
- Test and Adjust: Start the vehicle and test the new gearbox for proper operation. Check for any leaks, unusual noises, or gear shifting issues.
- Final Check: Double-check all connections and ensure that all components are properly secured.
- Dispose of Old Fluid: Dispose of the old transmission fluid safely and responsibly.
- Dispose of Old Gearbox: Properly dispose of the old gearbox according to local regulations.
It’s important to note that gearbox replacement can vary significantly depending on the vehicle’s make and model. It’s recommended to consult the vehicle’s service manual or seek professional assistance if you’re not experienced in automotive repair.
editor by CX 2023-09-08