Tag Archives: new shaft

China high quality CZPT New Type Ngw Series Planetary Gearbox with CZPT Shaft best automatic gearbox

Product Description

Product Description

Aokman New Type Ngw Series Planetary Gearbox with CHINAMFG Shaft

NGW series gearboxes consist of single-stage(NGW11-NGW121),two-stage(NGW42-NGW122) and stree-stage(NGW73-NGW123).

1.Model Number
NGW, NGW-L, NGW-S, NGW-QJ 

2.Applications
NGW Planetary Gear Units is widely used in many areas such as metallurgy, mine, lifting, transportation, textile, cement, light industry, chemical, pharmaceutical, dye printing and so on. 

Detailed Photos

3.Product Characteristics
(1) Small volume, light weight, well-knitted structure, big transmission power and high load capacity. Compared with the ordinary cylindrical gear reducers of the same level, its weight is lower 1/2 and volume is only 1/2-1/3 of the former.
(2) High transmission efficiency. 1-stage is up to 97%, 2-stage 94%, 3-stage 91%.
(3) The range of transmission power is very wide, from 1kw to 1300kw.
(4) NGW Planetary Gear Units is designed with hard-tooth-faced, and can be used widely and in long period.
(5) Big transmission ratio 

4.Technical Data(NGW)
Original Version NGW Series
Shafts Position: In Line
1 Stage: NGW11~NGW121 Ratio: 2.8~12.5
2 Stage: NGW42~NGW122 Ratio: 14~160
3 Stage: NGW73~NGW123 Ratio: 180~2000

New Design NGW Series
Shafts Position: In Line, Parallel Shaft
NAD(NAF) – 1 Stage, Foot Mounted(Flange Mounted), In Line
NAZD(NAZF) – 1 Stage, Foot Mounted(Flange Mounted), Parallel Shaft
NBD(NBF) – 2 Stage, Foot Mounted(Flange Mounted), In Line

Product Parameters

NGW-S Series Planetary Gearboxes
Shafts Position: Right Angle
Gearset: Spiral Bevel Gear Pair Integrated With Planetary Gear Set
2 Stage: NGW-S42~NGW-S122 Ratio: 11.2~80
3 Stage: NGW-S73~NGW-S123 Ratio: 56~500
 

Stage Model Size                   Ratio Rated Power
Single-stage NGW11~NGW121  1~12 2.8~12.5 2. 8-1314KW
Two-stage NGW42~NGW122  1~12 14-160 0.7-517KW
Three-stage NGW73~NGW123  1~6 180-2000 0.16-47.1KW

Types Sizes Nominal Ratio Input Shaft Dia.(m6) Output Shaft Dia.(n6)
NAD 200,224,…1800,2000 4~5.6

6.3~9

50~400mm

40~360mm

60~630mm
NAF 200,224,…500,560 4~5.6

6.3~9

50~130mm

40~100mm

60~220mm
NAZD 200,224,…1400,1600 10~18 30~240mm 60~560mm
NAZF 200,224,…500,560 10~18 30~85mm 60~220mm
NBD 250,280,…1800,2000 20~25

28~50

30~280mm 80~630mm
NBF 250,280,…500,560 20~25

28~50

30~80mm 80~220mm
NBZD 250,280,…1400,1600 56~125 28~170mm 80~560mm
NBZF 250,280,…500,560 56~125 28~55mm 80~220mm
NCD 315,355,…1800,2000 112~400 25~150mm 120~630mm
NCF 315,355,…500,560 112~400 25~50mm 120~220mm
NCZD 315,355,…1800,2000 450~1250 20~170mm 120~630mm
NCZF 315,355,…500,560 450~1250 25~45mm 120~220mm

Packaging & Shipping

Company Profile

After Sales Service

Pre-sale services 1. Select equipment model.
2.Design and manufacture products according to clients’ special requirement.
3.Train technical personal for clients
Services during selling 1.Pre-check and accept products ahead of delivery.
2. Help clients to draft solving plans.
After-sale services 1.Assist clients to prepare for the first construction scheme.
2. Train the first-line operators.
3.Take initiative to eliminate the trouble rapidly.
4. Provide technical exchanging.

FAQ

1.Q:What kinds of gearbox can you produce for us?

A:Main products of our company: UDL series speed variator,RV series worm gear reducer, ATA series shaft mounted gearbox, X,B series gear reducer,
P series planetary gearbox and R, S, K, and F series helical-tooth reducer, more
than 1 hundred models and thousands of specifications
2.Q:Can you make as per custom drawing?
A: Yes, we offer customized service for customers.
3.Q:What is your terms of payment ?
A: 30% Advance payment by T/T after signing the contract.70% before delivery
4.Q:What is your MOQ?
A: 1 Set

If you have any demand for our products please feel free to contact me. /* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Application: Machinery
Function: Speed Changing, Speed Reduction
Layout: Coaxial
Hardness: Hardened Tooth Surface
Installation: Horizontal Type
Step: Double-Step
Customization:
Available

|

Customized Request

gearbox

Common Problems with Gearboxes and How to Troubleshoot Them

Gearboxes can encounter various issues over time. Here are some common problems and troubleshooting steps:

  1. Noise and Vibration: Excessive noise or vibration may indicate misalignment, worn gears, or insufficient lubrication. Check alignment, inspect gears for wear, and ensure proper lubrication.
  2. Overheating: Overheating can be caused by high friction, inadequate lubrication, or overloading. Verify lubrication levels, reduce loads, and ensure proper ventilation.
  3. Leakage: Oil leaks may result from worn seals or gaskets. Inspect and replace damaged seals, and ensure proper sealing.
  4. Reduced Performance: Decreased performance could be due to worn gears, damaged bearings, or misalignment. Inspect components, replace damaged parts, and realign as needed.
  5. Gear Wear and Tooth Damage: Wear on gear teeth can result from excessive loads or poor lubrication. Replace worn gears and ensure proper lubrication.
  6. Shaft Misalignment: Shaft misalignment can lead to increased wear and noise. Realign shafts using precision measurement tools.
  7. Lubrication Issues: Inadequate or contaminated lubrication can cause premature wear. Regularly check and replace lubricant, and use the correct type for your gearbox.
  8. Bearing Failure: Bearing failure may result from overload, misalignment, or inadequate lubrication. Replace worn bearings and address underlying issues.
  9. Seal Damage: Damaged seals can lead to leaks and contamination. Replace seals and ensure proper installation.
  10. Gearbox Lockup: Gearbox lockup may occur due to foreign objects or damaged components. Disassemble and inspect the gearbox, removing any obstructions and replacing damaged parts.

Regular maintenance, proper lubrication, and timely troubleshooting are key to addressing gearbox problems and ensuring smooth operation.

China high quality CZPT New Type Ngw Series Planetary Gearbox with CZPT Shaft   best automatic gearbox	China high quality CZPT New Type Ngw Series Planetary Gearbox with CZPT Shaft   best automatic gearbox
editor by CX 2024-01-08

China Hot selling Motor Shaft Oil Pump Transmission Gear Bevel Gear Valve Body Work Column Machinery Agricultural Shaft New Energy Motor Gear Shaft with Great quality

Product Description

Organization Profile

Business Profile

HangZhou Xihu (West Lake) Dis. CZPT Equipment Co., Ltd., is a manufacture of precision machining from steel plates, castings & closed die forgings. It is launched in 2571 12 months, addresses a whole location of about 2000 square meters.
All around 50 people are employed, which includes 4 engineers.

The organization outfitted with ten indirect guide CNC Lathes, 35 typical CNC lathes, 6 machining facilities, other milling equipment and drilling equipment.

The Merchandise include design components, car elements, health-related remedy, aerospace, electronics and other fields, exported to Japan, Israel & other Asian international locations and Germany, the United States, Canada & other European and American countries.

Certificated by TS16949 quality management technique.

Tools Introduction

Principal CZPT and doing work variety, inspection products as comply with

four axles CNC Equipment Heart 1000mm*600mm*650mm
Oblique Xihu (West Lake) Dis. CNC Equipment max φ800mm
max length 700mm
Tolerance manage in .01
A single time clamping, high precision
Turning-milling Compound Machining Centre max φ800mm
max size 1000mm
Other CNC Lathe Overall thirty sets
Inspection Equipment CMM, Projector, CZPT Scale, Micrometer
Profiloscope, Hardness tester and so on

Indirect Xihu (West Lake) Dis. CNC Lathe

Geared up with ten sets of oblique manual CNC Lathes The greatest diameter can be four hundred-five hundred mm Precision can reach .01mm

Machining Middle

six sets of 4 axles machining center, max SPEC: 1300*70mm, precision can get to .01mm

About Goods

High quality Management

 

We often want to be precise, so check dimensions soon after every single manufacturing stage. We have senior engineers, skilled CNC operator, professional quality inspector. All this tends to make certain the last goods are large experienced.

Also can do third parity inspection accoring to customer’s reequirments, these kinds of as SGS, TUV, ICAS and so on.

Callipers/Top guage
Thread guage
Go/ no go guage
Within micrometer
Outdoors micrometer
Micron scale

CMM
Projector
Micrometer
Profiloscope
Hardness tester

 

 

Inspection Approach

 

one. Just before machining, the engineer will give away the engineering card for each method acc. to drawing for quality control.
2. During the machining, the workers will examination the proportions at every action, then marked in the technology card.
3. When machining finished, the expert testing staff will do a hundred% retesting again.

 

Packing Location

 

In common, the items will be packed in bubble wrap or separated by plywoods firstly.
Then the wrapped products will be put in the wood circumstances (no reliable wood), which is authorized for export.
Areas can also be packed acc. to customer’s requirement.

Gearboxes and reducers are enclosed mechanical reduction gadgets commonly used in present day automatic management methods to command torque from your motors and complete other motion-associated responsibilities. A gearbox permits you to boost torque although minimizing the velocity of your key mover output shaft. The output shaft of the gearbox rotates at a slower speed than the input shaft. This produces a mechanical benefit, increasing torque. Conversely, your gearbox can be established in reverse, delivering increased shaft velocity and reduced torque. Two widespread transmission configurations are straight and proper angle. Online versions generally consist of helical or spur gears, planetary gears, cycloidal mechanisms, or harmonic generators. Proper-angle types generally use worm or helical gear drives, nonetheless, hybrid drives are also obtainable. Gearmotors merge an enclosed equipment established with an electric motor to improve torque and efficiency while lowering pace. Although additional friction, inertia, or sharp load adjustments for limited-term operation of the actuator can cause troubles, they supply a prolonged functioning daily life by protecting against overloading. A variety of equipment ratios, speeds and torques are obtainable to support enhance efficiency and reduce prospective issues. Look through to locate the right gearbox and reducer for your automation project.
The expression “gearbox” is used to refer to any gadget that connects a motor to a machine and is made up of a series of gears, also known as a gear established. It gets the major enter velocity from the motor and modifications it to a various output velocity making use of its gears. Diverse varieties and combos of gears serve certain reasons. The types of gears discovered in gearboxes incorporate spur gears, bevel gears, helical gears, helical gears and worm gears. The overall performance efficiency of a gearbox is represented by the gearbox ratio, which is the ratio of the velocity of the enter resource to the velocity of the output supply

China Hot selling Motor Shaft Oil Pump Transmission Gear Bevel Gear Valve Body Work Column Machinery Agricultural Shaft New Energy Motor Gear Shaft     with Great quality

China Good quality Auto and Motorcycle Accessory New Energy Motor Shaft Series Connecting Shaft Oil Pump Gear Pto Gear Transmission Gear with Hot selling

Merchandise Description

Company Profile

Company Profile

HangZhou Xihu (West Lake) Dis. CZPT Machinery Co., Ltd., is a manufacture of precision machining from steel plates, castings & closed die forgings. It is established in 2571 calendar year, covers a whole region of about 2000 square meters.
Close to fifty individuals are used, such as 4 engineers.

The firm equipped with 10 oblique manual CNC Lathes, 35 regular CNC lathes, 6 machining facilities, other milling equipment and drilling equipment.

The Items cover building parts, car parts, health-related remedy, aerospace, electronics and other fields, exported to Japan, Israel & other Asian nations and Germany, the United States, Canada & other European and American nations.

Certificated by TS16949 good quality administration system.

Products Introduction

Primary CZPT and working selection, inspection gear as stick to

four axles CNC Equipment Heart 1000mm*600mm*650mm
Indirect Xihu (West Lake) Dis. CNC Device max φ800mm
max size 700mm
Tolerance manage in .01
One time clamping, higher precision
Turning-milling Compound Machining Center max φ800mm
max size 1000mm
Other CNC Lathe Complete thirty sets
Inspection Gear CMM, Projector, CZPT Scale, Micrometer
Profiloscope, Hardness tester and so on

Indirect Xihu (West Lake) Dis. CNC Lathe

Outfitted with ten sets of oblique information CNC Lathes The optimum diameter can be four hundred-five hundred mm Precision can achieve .01mm

Machining Centre

six sets of 4 axles machining heart, max SPEC: 1300*70mm, precision can get to .01mm

About Goods

Quality Manage

 

We often want to be precise, so examine proportions following every single generation action. We have senior engineers, expert CNC operator, specialist top quality inspector. All this makes certain the closing merchandise are high experienced.

Also can do third parity inspection accoring to customer’s reequirments, these kinds of as SGS, TUV, ICAS and so on.

Callipers/Peak guage
Thread guage
Go/ no go guage
Inside micrometer
Exterior micrometer
Micron scale

CMM
Projector
Micrometer
Profiloscope
Hardness tester

 

 

Inspection Process

 

one. Ahead of machining, the engineer will give away the engineering card for each process acc. to drawing for good quality handle.
2. In the course of the machining, the personnel will check the proportions at every step, then marked in the technologies card.
3. When machining concluded, the specialist tests staff will do a hundred% retesting once again.

 

Packing Spot

 

In general, the items will be packed in bubble wrap or separated by plywoods to begin with.
Then the wrapped goods will be set in the wood circumstances (no sound wooden), which is permitted for export.
Parts can also be packed acc. to customer’s need.

The term “gearbox” is utilized to refer to any unit that connects a motor to a device and consists of a collection of gears, also identified as a equipment established. It receives the principal input velocity from the motor and modifications it to a diverse output velocity employing its gears. Diverse kinds and combos of gears provide particular purposes. The varieties of gears found in gearboxes incorporate spur gears, bevel gears, helical gears, helical gears and worm gears. The functionality effectiveness of a gearbox is represented by the gearbox ratio, which is the ratio of the speed of the enter source to the pace of the output source
We are knowledgeable transmission dealers and provide a wide assortment of transmissions, an vital portion of several travel systems. Gearboxes can be utilized to lessen or improve speed, increase torque, reverse or change the route of a generate shaft. Gearboxes are also recognized as equipment drives, speed reducers, equipment motors, velocity reducers and gear reducers.

China Good quality Auto and Motorcycle Accessory New Energy Motor Shaft Series Connecting Shaft Oil Pump Gear Pto Gear Transmission Gear     with Hot selling