Product Description
CHINAMFG Marine Gearbox JT400/1is suitable for small fishing, transport, traffic and passenger boats
Marine Gearbox JT400/1 possesses functions of speed reduction, ahead and astern clutching and bearing propeller thrust. It is designed of vertically offset and one-stage transmission, featuring in small in volume and light in weight.
| Input speed | 1500-3000r/min | ||
| Reduction ratio | 2.03,2.46 | Trans. capacity | 0.571kw/r/min |
| 3.04 | 0.018kw/r/min | ||
| 3.57 | 0.016kw/r/min | ||
| 4.05 | 0.014 kw/r/min | ||
| 4.39 | 0.013 kw/r/min | ||
| 4.70 | 0.011 kw/r/min | ||
| Control way | Push-and-pull flexible shaft, electrically, pneumatically | ||
| Rated thrust | 5.5KN | ||
| Center distance | 125mm | ||
| L×W×H | 291×454×485mm | ||
| Net weight | 115kg | ||
| Flywheel | SAE11.5,10 | ||
| Bell housing | SAE2,3,4 | ||
.
Marine Gearbox MA100 possesses functions of speed reduction, ahead and astern clutching and bearing propeller thrust. It is designed of vertically offset and one-stage transmission, featuring in small in volume and light in weight.
| Input speed | 1500-3000r/min | ||
| Reduction ratio | 1.60,2.00 | Trans. capacity | 0.009kw/r/min |
| 2.55,3.11 | 0.007kw/r/min | ||
| 3.59,3.88 | 0.006kw/r/min | ||
| Control way | Push-and-pull flexible shaft, electrically, pneumatically | ||
| Rated thrust | 3KN | ||
| Center distance | 100mm | ||
| L×W×H | 236×390×420mm | ||
| Net weight | 75kg | ||
| Flywheel | SAE11.5,10,7.5 | ||
| Bell housing | SAE3,4,5 | ||
Marine Gearbox J300 possesses functions of speed reduction, ahead and astern clutching and bearing propeller thrust. It is designed of vertically offset and one-stage transmission, featuring in small in volume, large in ratio, light in weight, and convenient in dis- and reassembly and maintenance.
| Input speed | 750-2500r/min | ||
| Reduction ratio | 2.04,2.54,3.0,3.47 | Trans. capacity | 0.280kw/r/min |
| 3.95 | 0.257kw/r/min | ||
| Control way | Push-and-pull flexible shaft, electrically, pneumatically | ||
| Rated thrust | 60KN | ||
| Center distance | 264mm | ||
| L×W×H | 786×930×864mm | ||
| Net weight | 740kg | ||
| Flywheel | 12V135,12V150,SAE18,16,14 | ||
| Bell housing | 12V135,12V150,SAE0,1 | ||
Marine Gearbox HCW800 possesses functions of speed reduction, ahead and astern clutching and bearing propeller thrust. It is designed of vertically offset and three-stage transmission, featuring in compact structure, extra large ratio, and convenient in dis- and reassembly and maintenance.
| Input speed | 1500-1900r/min | ||
| Reduction ratio | 12.584,13.244 | Trans. capacity | 0.73kw/r/min |
| 13.945 | 0.7kw/r/min | ||
| 14.68 | 0.68kw/r/min | ||
| 15.46 | 0.66kw/r/min | ||
| 15.915 | 0.64kw/r/min | ||
| 16.285 | 0.61kw/r/min | ||
| 17.16,17.696 | 0.57kw/r/min | ||
| 18.267 | 0.55kw/r/min | ||
| 19.078 | 0.53kw/r/min | ||
| 19.714,20.13 | 0.5kw/r/min | ||
| Control way | Push-and-pull flexible shaft, electrically, pneumatically | ||
| Rated thrust | 240KN | ||
| Center distance | 570mm | ||
| L×W×H | 1371x1560x1910mm | ||
| Net weight | 3800kg | ||
| Flywheel | Depend on engine flywheel | ||
| Bell housing | No | ||
Marine Gearbox HCW1100 possesses functions of speed reduction, ahead and astern clutching and bearing propeller thrust. It is designed of vertically offset and three-stage transmission, featuring in compact structure, extra large ratio, and convenient in dis- and reassembly and maintenance.
| Input speed | 1500-1800r/min | ||
| Reduction ratio | 15.882 | Trans. capacity | 0.931kw/r/min |
| 16.546 | 0.931kw/r/min | ||
| 17.243 | 0.894kw/r/min | ||
| 17.973 | 0.857kw/r/min | ||
| 18.740 | 0.822kw/r/min | ||
| 19.547 | 0.788kw/r/min | ||
| 20.395 | 0.756kw/r/min | ||
| Control way | Push-and-pull flexible shaft, electrically, pneumatically | ||
| Rated thrust | 300KN | ||
| Center distance | 625mm | ||
| L×W×H | 1143x1630x2550mm | ||
| Net weight | 6000kg | ||
| Flywheel | Depend on engine flywheel | ||
| Bell housing | No | ||
Marine Gearbox HCT800 possesses functions of speed reduction, ahead and astern clutching and bearing propeller thrust. It is designed of vertically offset and two-stage transmission, featuring in compact structure, larger ratio, higher loading capacity and convenient in dis- and reassembly and maintenance.
| Input speed | 600-1800r/min | ||
| Reduction ratio | 4.95,5.57,5.68,5.93,6.43 | Trans. capacity | 0.625kw/r/min |
| 6.86 | 0.588kw/r/min | ||
| 7.33 | 0.551kw/r/min | ||
| 7.84 | 0.515kw/r/min | ||
| 8.40 | 0.480kw/r/min | ||
| Control way | Push-and-pull flexible shaft, electrically, pneumatically | ||
| Rated thrust | 140KN | ||
| Center distance | 450mm | ||
| L×W×H | 1056×1280×1425mm | ||
| Net weight | 2700kg | ||
| Flywheel | SAE21,18,16 | ||
| Bell housing | SAE00,0 | ||
Marine Gearbox HCT800/3 possesses functions of speed reduction, ahead and astern clutching and bearing propeller thrust. It is designed of vertically offset and two-stage transmission, featuring in compact structure, larger ratio, higher loading capacity and convenient in dis- and reassembly and maintenance.
| Input speed | 800-1800r/min | ||
| Reduction ratio | 16.56 | Trans. capacity | 0.597kw/r/min |
| 17.95 | 0.551kw/r/min | ||
| 20.2 | 0.491kw/r/min | ||
| Control way | Push-and-pull flexible shaft, electrically, pneumatically | ||
| Rated thrust | 240KN | ||
| Center distance | 736mm | ||
| L×W×H | 1235x1570x1789mm | ||
| Net weight | 4200kg | ||
| Flywheel | SAE21,18,16 | ||
| Bell housing | SAE00,0 | ||
Marine Gearbox HCT800/1 possesses functions of speed reduction, ahead and astern clutching and bearing propeller thrust. It is designed of vertically offset and two-stage transmission, featuring in compact structure, larger ratio and convenient in dis- and reassembly and maintenance.
|
Input speed |
600-1800r/min |
||
|
Reduction ratio |
6.91,7.28,7.69,8.12,8.60,9.12,9.68 |
Trans. capacity |
0.625kw/r/min |
|
10.30 |
0.609kw/r/min |
||
|
10.98 |
0.575kw/r/min |
||
|
11.76 |
0.549kw/r/min |
||
|
12.43 |
0.520kw/r/min |
||
|
13.17 |
0.491kw/r/min |
||
|
13.97 |
0.463kw/r/min |
||
|
14.85 |
0.435kw/r/min |
||
|
15.82 |
0.408kw/r/min |
||
|
16.58 |
0.382kw/r/min |
||
|
17.91 |
0.378kw/r/min |
||
|
20.1 |
0.278kw/r/min |
||
| Control way |
Push-and-pull flexible shaft, electrically, pneumatically |
||
| Rated thrust |
220KN |
||
| Center distance |
582mm |
||
| L×W×H |
1152x1360x1557mm |
||
| Net weight |
3200kg |
||
| Flywheel |
SAE21,18,16 |
||
| Bell housing |
SAE00,0 |
||
Marine Gearbox HCT600A possesses functions of speed reduction, ahead and astern clutching and bearing propeller thrust. It is designed of vertically offset and two-stage transmission, featuring in small in volume, light in weight and large in ratio.
| Input speed | 1000-2100r/min | ||
| Reduction ratio | 6.06 | Trans. capacity | 0.44kw/r/min |
| 6.49 | 0.40kw/r/min | ||
| 6.97,7.51 | 0.37kw/r/min | ||
| 8.04 | 0.33kw/r/min | ||
| 8.66 | 0.29kw/r/min | ||
| 9.35 | 0.28kw/r/min | ||
| Control way | Push-and-pull flexible shaft, electrically, pneumatically | ||
| Rated thrust | 90KN | ||
| Center distance | 415mm | ||
| L×W×H | 805×1094×1271mm | ||
| Net weight | 1650kg | ||
| Flywheel | SAE18,16,14 | ||
| Bell housing | SAE00,0 | ||
Marine Gearbox HCT600A/1 possesses functions of speed reduction, ahead and astern clutching and bearing propeller thrust. It is designed of vertically offset and two-stage transmission, featuring in small in volume, light in weight and large in ratio.
| Input speed | 1000-2100r/min | ||
| Reduction ratio | 7.043,7.69,8.23 | Trans. capacity | 0.441kw/r/min |
| 8.82 | 0.412kw/r/min | ||
| 9.47 | 0.400kw/r/min | ||
| 10.10 10.80 | 0.375kw/r/min | ||
| 11.65 | 0.353kw/r/min | ||
| 12.57 | 0.331kw/r/min | ||
| 14.44 | 0.257kw/r/min | ||
| 15.91 | 0.204kw/r/min | ||
| Control way | Push-and-pull flexible shaft, electrically, pneumatically | ||
| Rated thrust | 140KN | ||
| Center distance | 500mm | ||
| L×W×H | 878x1224x1346mm | ||
| Net weight | 1700kg | ||
| Flywheel | SAE21,18,16 | ||
| Bell housing | SAE00,0 | ||
.
Marine Gearbox HCT400A possesses functions of speed reduction, ahead and astern clutching and bearing propeller thrust. It is designed of vertically offset and two-stage transmission, featuring in small in volume, large in ratio, light in weight and higher loading capacity.
| Input speed | 1000-2100r/min | ||
| Reduction ratio | 6.09,6.49,6.93 | Trans. capacity | 0.331kw/r/min |
| 7.42 | 0.309 kw/r/min | ||
| 7.95 | 0.287kw/r/min | ||
| 8.40 | 0.265 kw/r/min | ||
| 9.00,9.47 | 0.243 kw/r/min | ||
| Control way | Push-and-pull flexible shaft, electrically, pneumatically | ||
| Rated thrust | 82KN | ||
| Center distance | 375mm | ||
| L×W×H | 784×992×1130mm | ||
| Net weight | 1450kg | ||
| Flywheel | SAE18,16,14 | ||
| Bell housing | SAE0,1 | ||
Marine Gearbox HCT400A/1 possesses functions of speed reduction, ahead and astern clutching and bearing propeller thrust. It is designed of vertically offset and two-stage transmission, featuring in compact in structure, larger ratio, and higher loading capacity.
| Input speed | 1000-2100r/min | ||
| Reduction ratio | 8.15,8.69,9.27 | Trans. capacity | 0.331kw/r/min |
| 9.94 | 0.316 kw/r/min | ||
| 10.60 | 0.297kw/r/min | ||
| 11.37 | 0.274 kw/r/min | ||
| 12.00 | 0.262 kw/r/min | ||
| 14.00 | 0.204 kw/r/min | ||
| Control way | Push-and-pull flexible shaft, electrically, pneumatically | ||
| Rated thrust | 120KN | ||
| Center distance | 465mm | ||
| L×W×H | 869×1100×1275mm | ||
| Net weight | 1500kg | ||
| Flywheel | SAE18,16,14 | ||
| Bell housing | SAE0,1 | ||
Marine Gearbox HCT2000 possesses functions of speed reduction, ahead and astern clutching and bearing propeller thrust. It is designed of vertically offset and two-stage transmission, featuring in compact in structure, large in ratio, and convenient in dis- and reassembly and maintenance.
| Input speed | 600-1500r/min | ||
| Reduction ratio | 5.185,5.494,5.943, 6.583,7.012,7.483,8 |
Trans. capacity | 1.48kw/r/min |
| 8.57 | 1.42kw/r/min | ||
| 8.843 | 1.34kw/r/min | ||
| 9.428 | 1.23kw/r/min | ||
| 10.05 | 1.21kw/r/min | ||
| Control way | Push-and-pull flexible shaft, electrically, pneumatically | ||
| Rated thrust | 280KN | ||
| Center distance | 625mm | ||
| L×W×H | 1284x1600x1835mm | ||
| Net weight | 5600kg | ||
| Flywheel | Depend on engine flywheel | ||
| Bell housing | NO | ||
Marine Gearbox HCT1600 possesses functions of speed reduction, ahead and astern clutching and bearing propeller thrust. It is designed of vertically offset and two-stage transmission, featuring in compact in structure, large in ratio, and convenient in dis- and reassembly and maintenance.
| Input speed | 500-1650r/min | ||
| Reduction ratio | 5.545,5.972,6.585, 6.99,7.456,7.9 |
Trans. capacity | 1.213kw/r/min |
| 8.45 | 1.104kw/r/min | ||
| 9 | 1.104kw/r/min | ||
| 9.5 | 0.93kw/r/min | ||
| Control way | Push-and-pull flexible shaft, electrically, pneumatically | ||
| Rated thrust | 250KN | ||
| Center distance | 585mm | ||
| L×W×H | 1246x1500x1750mm | ||
| Net weight | 4200kg | ||
| Flywheel | Depend on engine flywheel | ||
| Bell housing | No | ||
Marine Gearbox HCT1400 possesses functions of speed reduction, ahead and astern clutching and bearing propeller thrust. It is designed of vertically offset and two-stage transmission, featuring in compact in structure, large in ratio, and convenient in dis- and reassembly and maintenance.
| Input speed | 600-1800r/min | ||
| Reduction ratio | 4,4.511,5.03,5.52,5.97, 6.48,7.03,7.50,8.01 |
Trans. capacity | 1.03kw/r/min |
| 8.465 | 1kw/r/min | ||
| 8.593 | 0.96kw/r/min | ||
| 8.984 | 0.93kw/r/min | ||
| 9.118 | 0.90kw/r/min | ||
| 9.552 | 0.85kw/r/min | ||
| Control way | Push-and-pull flexible shaft, electrically, pneumatically | ||
| Rated thrust | 220KN | ||
| Center distance | 550mm | ||
| L×W×H | 1306x1380x1750mm | ||
| Net weight | 3700kg | ||
| Flywheel | Depend on engine flywheel | ||
| Bell housing | No | ||
Marine Gearbox HCT1200 possesses functions of speed reduction, ahead and astern clutching and bearing propeller thrust. It is designed of vertically offset and two-stage transmission, featuring in compact in structure, large in ratio, and convenient in dis- and reassembly and maintenance.
| Input speed | 700-1600r/min | ||
| Reduction ratio | 5.05,5.60,5.98,6.39, 6.85,7.35,7.90 |
Trans. capacity | 0.93kw/r/min |
| Control way | Push-and-pull flexible shaft, electrically, pneumatically | ||
| Rated thrust | 150KN | ||
| Center distance | 500mm | ||
| L×W×H | 1188*1350*1547mm | ||
| Net weight | 3050kg | ||
| Flywheel | Depend on engine flywheel | ||
| Bell housing | SAE00 0 | ||
Marine Gearbox HCT1100 possesses functions of speed reduction, ahead and astern clutching and bearing propeller thrust. It is designed of vertically offset and two-stage transmission, featuring in compact in structure, large in ratio, and convenient in dis- and reassembly and maintenance.
| Input speed | 700-1800r/min | ||
| Reduction ratio | 4.94,5.60,5.98,6.39 | Trans. capacity | 0.846kw/r/min |
| 6.85 | 0.835kw/r/min | ||
| 7.35 | 0.772kw/r/min | ||
| 7.90 | 0.736kw/r/min | ||
| Control way | Push-and-pull flexible shaft, electrically, pneumatically | ||
| Rated thrust | 150KN | ||
| Center distance | 500mm | ||
| L×W×H | 1150x1350x1547mm | ||
| Net weight | 3000kg | ||
| Flywheel | Depend on engine flywheel | ||
| Bell housing | SAE00 0 | ||
Marine Gearbox HCD800 possesses functions of speed reduction, ahead and astern clutching and bearing propeller thrust. It is designed of vertically offset and one-stage transmission, featuring in compact in structure, large in ratio, and convenient in dis- and reassembly and maintenance.
| Input speed | 600-1800r/min | ||
| Reduction ratio | 3.0,3.429,3.960,4.167,4.391 | Trans. capacity | 0.625kw/r/min |
| 4.905 | 0.588kw/r/min | ||
| 5.474 | 0.551kw/r/min | ||
| 5.889 | 0.515kw/r/min | ||
| Control way | Push-and-pull flexible shaft, electrically, pneumatically | ||
| Rated thrust | 110KN | ||
| Center distance | 450mm | ||
| L×W×H | 1056x1280x1341mm | ||
| Net weight | 2200kg | ||
| Flywheel | SAE21,18,16 | ||
| Bell housing | SAE00,0 | ||
Marine Gearbox HCD600A possesses functions of speed reduction, ahead and astern clutching and bearing propeller thrust. It is designed of vertically offset and one-stage transmission, featuring in small in volume, light in weight and large in ratio.
| Input speed | 1000-2100r/min | ||
| Reduction ratio | 4.18,4.43 | Trans. capacity | 0.48kw/r/min |
| 4.70 | 0.46kw/r/min | ||
| 5.00 | 0.44kw/r/min | ||
| 5.44,5.71 | 0.4kw/r/min | ||
| Control way | Push-and-pull flexible shaft, electrically, pneumatically | ||
| Rated thrust | 90KN | ||
| Center distance | 415mm | ||
| L×W×H | 745x1094x1271mm | ||
| Net weight | 1550kg | ||
| Flywheel | SAE21,18,16,14 | ||
| Bell housing | SAE00,0 | ||
Marine Gearbox HCD400A possesses functions of speed reduction, ahead and astern clutching and bearing propeller thrust. It is designed of vertically offset and one-stage transmission, featuring in small in volume, large in ratio, light in weight and high in loading capacity.
| Input speed | 1000-1800r/min | ||
| Reduction ratio | 3.96,4.33,4.43,4.476,4.70,5.00 | Trans. capacity | 0.331kw/r/min |
| 5.53 | 0.293 kw/r/min | ||
| 5.70,5.89 | 0.272kw/r/min | ||
| Control way | Push-and-pull flexible shaft, electrically, pneumatically | ||
| Rated thrust | 82KN | ||
| Center distance | 355mm | ||
| L×W×H | 641×950×988mm | ||
| Net weight | 1100kg | ||
| Flywheel | SAE18,16,14 | ||
| Bell housing | SAE0,1 | ||
Marine Gearbox HCD2700 possesses functions of speed reduction, ahead and astern clutching and bearing propeller thrust. It is designed of vertically offset and one-stage transmission, featuring in compact in structure, large in ratio, and convenient in dis- and reassembly and maintenance.
| Input speed | 500-1400r/min | ||
| Reduction ratio | 3.65,4.042,4.5,5.05 | Trans. capacity | 2.05kw/r/min |
| 5.476 | 1.96kw/r/min | ||
| 6.105 | 1.7kw/r/min | ||
| Control way | Push-and-pull flexible shaft, electrically, pneumatically | ||
| Rated thrust | 280KN | ||
| Center distance | 630mm | ||
| L×W×H | 1400x1780x1530mm | ||
| Net weight | 6000kg | ||
| Flywheel | Depend on engine flywheel | ||
| Bell housing | NO | ||
Marine Gearbox HCD2000 possesses functions of speed reduction, ahead and astern clutching and bearing propeller thrust. It is designed of vertically offset and one-stage transmission, featuring in compact in structure, large in ratio, and convenient in dis- and reassembly and maintenance.
| Input speed | 600-1500r/min | ||
| Reduction ratio | 3,3.577,3.958,4.455,4.95 | Trans. capacity | 1.48kw/r/min |
| 5.263 | 1.42kw/r/min | ||
| 5.429 | 1.34kw/r/min | ||
| 5.75 | 1.23kw/r/min | ||
| 6.053 | 1.21kw/r/min | ||
| Control way | Push-and-pull flexible shaft, electrically, pneumatically | ||
| Rated thrust | 220KN | ||
| Center distance | 560mm | ||
| L×W×H | 1600*1620*1645mm | ||
| Net weight | 4000kg | ||
| Flywheel | Depend on engine flywheel | ||
| Bell housing | NO | ||
Marine Gearbox HCD1400 possesses functions of speed reduction, ahead and astern clutching and bearing propeller thrust. It is designed of vertically offset and one-stage transmission, featuring in compact in structure, large in ratio, and convenient in dis- and reassembly and maintenance.
| Input speed | 600-1800r/min | ||
| Reduction ratio | 4.04,4.27,4.52,4.8,5.045,5.5 | Trans. capacity | 1.03kw/r/min |
| 5.857 | 0.778kw/r/min | ||
| Control way | Push-and-pull flexible shaft, electrically, pneumatically | ||
| Rated thrust | 175KN | ||
| Center distance | 485mm | ||
| L×W×H | 1260*1380*1360mm | ||
| Net weight | 2800kg | ||
| Flywheel | Depend on engine flywheel | ||
| Bell housing | NO | ||
Marine Gearbox HCD138 possesses functions of speed reduction, ahead and astern clutching and bearing propeller thrust. It is designed of vertically offset and one-stage transmission, featuring in large in ratio, small in volume and light in weight.
| Input speed | 1000-2500r/min | ||
| Reduction ratio | 5.05,5.63 | Trans. capacity | 0.110kw/r/min |
| 6.06 | 0.099kw/r/min | ||
| 6.47 | 0.093kw/r/min | ||
| Control way | Push-and-pull flexible shaft, electrically, pneumatically | ||
| Rated thrust | 40KN | ||
| Center distance | 296mm | ||
| L×W×H | 494×800×870mm | ||
| Net weight | 415kg | ||
| Flywheel | 6135Ca,SAE14,11.5 | ||
| Bell housing | 6135Ca,SAE1,2 | ||
Marine Gearbox HCD1000 possesses functions of speed reduction, ahead and astern clutching and bearing propeller thrust. It is designed of vertically offset and one-stage transmission, featuring in compact in structure, large in ratio, and convenient in dis- and reassembly and maintenance.
| Input speed | 600-1900r/min | ||
| Reduction ratio | 3.429,3.96,4.391,4.45,4.905,5.06 | Trans. capacity | 0.735kw/r/min |
| 5.474 | 0.68kw/r/min | ||
| 5.833 | 0.65kw/r/min | ||
| Control way | Push-and-pull flexible shaft, electrically, pneumatically | ||
| Rated thrust | 140KN | ||
| Center distance | 450mm | ||
| L×W×H | 1082*1280*1345mm | ||
| Net weight | 1900kg | ||
| Flywheel | SAE21,18 | ||
| Bell housing | SAE00,0 | ||
Marine Gearbox HC600A possesses functions of speed reduction, ahead and astern clutching and bearing propeller thrust. It is designed of vertically offset and one-stage transmission, featuring in small in volume and light in weight.
| Input speed | 1000-2100r/min | ||
| Reduction ratio | 2.00,2.48,3.00 | Trans. capacity | 0.48kw/r/min |
| 3.58 | 0.44kw/r/min | ||
| 3.89 | 0.40kw/r/min | ||
| Control way | Push-and-pull flexible shaft, electrically, pneumatically | ||
| Rated thrust | 90KN | ||
| Center distance | 320mm | ||
| L×W×H | 745*1094*1126mm | ||
| Net weight | 1300kg | ||
| Flywheel | SAE18,16,14 | ||
| Bell housing | SAE00,0 | ||
Marine Gearbox HC400 possesses functions of speed reduction, ahead and astern clutching and bearing propeller thrust. It is designed of vertically offset and one-stage transmission, featuring in small in volume, large in ratio, light in weight and high in loading capacity.
| Input speed | 1000-1800r/min | ||
| Reduction ratio | 1.50,1.77,2.04,2.50,2.86,3.00,3.42 | Trans. capacity | 0.331kw/r/min |
| 4.06 | 0.279 kw/r/min | ||
| 4.61,4.94 | 0.190 kw/r/min | ||
| Control way | Push-and-pull flexible shaft, electrically, pneumatically | ||
| Rated thrust | 82KN | ||
| Center distance | 264mm | ||
| L×W×H | 641×950×890mm | ||
| Net weight | 820kg | ||
| Flywheel | SAE18,16,14 | ||
| Bell housing | SAE0,1 | ||
Marine Gearbox HC300 possesses functions of speed reduction, ahead and astern clutching and bearing propeller thrust. It is designed of vertically offset and one-stage transmission, featuring in small in volume, large in ratio, and light in weight.
| Input speed | 700-2500r/min | ||
| Reduction ratio | 1.5,1.87,2.04,2.23,2.54,3,3.53 | Trans. capacity | 0.257kw/r/min |
| 4.1,4.47 | 0.2kw/r/min | ||
| 4.61 | 0.184kw/r/min | ||
| 4.94 | 0.147kw/r/min | ||
| 5.44 | 0.13kw/r/min | ||
| Control way | Push-and-pull flexible shaft, electrically, pneumatically | ||
| Rated thrust | 50KN | ||
| Center distance | 264mm | ||
| L×W×H | 680×930×880mm | ||
| Net weight | 680kg | ||
| Flywheel | 12V135,12V150,SAE18,16,14 | ||
| Bell housing | 12V135,12V150,SAE0,1 | ||
Marine Gearbox HC138 possesses functions of speed reduction, ahead and astern clutching and bearing propeller thrust. It is designed of vertically offset and one-stage transmission, featuring in small in volume and large in ratio.
| Input speed | 1000-2500r/min | ||
| Reduction ratio | 2.0,2.52,3.00,3.57,4.05,4.45 | Trans. capacity | 0.110kw/r/min |
| Control way | Push-and-pull flexible shaft, electrically, pneumatically | ||
| Rated thrust | 30KN | ||
| Center distance | 225mm | ||
| L×W×H | 520×792×760mm | ||
| Net weight | 360kg | ||
| Flywheel | 6135Ca,SAE14,11.5 | ||
| Bell housing | 6135Ca,SAE1,2,3 | ||
Marine Gearbox HC1250 possesses functions of speed reduction, ahead and astern clutching and bearing propeller thrust. It is designed of vertically offset and one-stage transmission, featuring in compact in structure, and easy in dismantle & reassemble and maintain.
| Input speed | 400-1800r/min | ||
| Reduction ratio | 2.032,2.481,3.043,3.476 | Trans. capacity | 0.919kw/r/min |
| 3.947 | 0.850kw/r/min | ||
| Control way | Push-and-pull flexible shaft, electrically, pneumatically | ||
| Rated thrust | 140KN | ||
| Center distance | 390mm | ||
| L×W×H | 1155x1330x1435mm | ||
| Net weight | 2200kg | ||
| Flywheel | Depend on engine flywheel | ||
| Bell housing | No | ||
Marine Gearbox HC1200 possesses functions of speed reduction, ahead and astern clutching and bearing propeller thrust. It is designed of vertically offset and one-stage transmission, featuring in compact in structure, and easy in dismantle & reassemble and maintain.
|
Input speed |
600-1900r/min |
||
|
Reduction ratio |
1.6,2.03,2.476,2.5,2.96,3.55 |
Trans. capacity |
0.93kw/r/min |
|
3.79 |
0.88kw/r/min |
||
|
4.05 |
0.80kw/r/min |
||
|
4.20 |
0.695kw/r/min |
||
|
4.47 |
0.650kw/r/min |
||
| Control way |
Push-and-pull flexible shaft, electrically, pneumatically |
||
| Rated thrust |
120KN |
||
| Center distance |
380mm |
||
| L×W×H |
1082x1200x1130mm |
||
| Net weight |
2000kg |
||
| Flywheel |
Depend on engine flywheel |
||
| Bell housing |
SAE00 0 |
||
Marine Gearbox HC1200/1 possesses functions of speed reduction, ahead and astern clutching and bearing propeller thrust. It is designed of vertically offset and one-stage transmission, featuring in compact in structure, large in ratio, and easy in dismantle & reassemble and maintain.
| Input speed | 600-1800r/min | ||
| Reduction ratio | 3.74,3.95,4.45 | Trans. capacity | 0.93kw/r/min |
| 5 | 0.833kw/r/min | ||
| 5.25 | 0.695kw/r/min | ||
| 5.58 | 0.65kw/r/min | ||
| Control way | Push-and-pull flexible shaft, electrically, pneumatically | ||
| Rated thrust | 140KN | ||
| Center distance | 450mm | ||
| L×W×H | 1096x1260x1270mm | ||
| Net weight | 2500kg | ||
| Flywheel | Depend on engine flywheel | ||
| Bell housing | SAE00 0 | ||
Marine Gearbox HC1000 possesses functions of speed reduction, ahead and astern clutching and bearing propeller thrust. It is designed of vertically offset and one-stage transmission, featuring in compact in structure and easy in dismantle & reassemble and maintain.
| Input speed | 600-1900r/min | ||
| Reduction ratio | 2,2.5,3.04,3.48 | Trans. capacity | 0.735kw/r/min |
| 4.06 | 0.65kw/r/min | ||
| Control way | Push-and-pull flexible shaft, electrically, pneumatically | ||
| Rated thrust | 110KN | ||
| Center distance | 335mm | ||
| L×W×H | 1082x1120x990mm | ||
| Net weight | 1700kg | ||
| Flywheel | Depend on engine flywheel | ||
| Bell housing | SAE00,0 | ||
Marine Gearbox 40A possesses functions of speed reduction, ahead and astern clutching and bearing propeller thrust. It is designed of vertically offset and one-stage transmission, featuring in small in volume and light in weight.
| Input speed | 750-2000r/min | ||
| Reduction ratio | 2.07,2.96 | Trans. capacity | 0.030kw/r/min |
| 3.44 | 0.571kw/r/min | ||
| Control way | Push-and-pull flexible shaft, electrically | ||
| Rated thrust | 8.8KN | ||
| Center distance | 142mm | ||
| L×W×H | 490×670×620mm | ||
| Net weight | 225kg | ||
| Flywheel | 4110C,SAE14,11.5 | ||
| Bell housing | 4110C,SAE1,2,3 | ||
Marine Gearbox 26 possesses functions of speed reduction, ahead and astern clutching and bearing propeller thrust. It is mechanically controlled, featuring in small in volume and light in weight.
| Input speed | 1000-2500r/min | ||
| Reduction ratio | 2.5,3 | Trans. capacity | 0.0199kw/r/min |
| 3.5 | 0.0190kw/r/min | ||
| 4 | 0.0177kw/r/min | ||
| Control way | Manually | ||
| Rated thrust | 5KN | ||
| Center distance | 135mm | ||
| L×W×H | 473.5×365×830mm | ||
| Net weight | 92kg | ||
| Flywheel | 4105C | ||
| Bell housing | 4105C | ||
Marine Gearbox 16A possesses functions of speed reduction, ahead and astern clutching and bearing propeller thrust. It is mechanically controlled, featuring in small in volume and light in weight.
.
| Input speed | 1000-2000r/min | ||
| Reduction ratio | 2.07,2.48,2.95,3.35,3.83 | Trans. capacity | 0.012kw/r/min |
| Control way | Manually | ||
| Rated thrust | 3.5KN | ||
| Center distance | 135mm | ||
| L×W×H | 422×325×563mm | ||
| Net weight | 84kg | ||
| Flywheel | 2105C 395,SAE11.5,10 | ||
| Bell housing | 2105C 395,SAE3,4 | ||
Marine Gearbox 135 possesses functions of speed reduction, ahead and astern clutching and bearing propeller thrust. It is designed of vertically offset and one-stage transmission, featuring in small in volume, light in weight and easy in dismantle & reassemble and maintain.
| Input speed | 750-2000r/min | ||
| Reduction ratio | 2.03,2.59,3.04,3.62,4.11 | Trans. capacity | 0.10kw/r/min |
| 4.65 | 0.093kw/r/min | ||
| 5.06 | 0.088kw/r/min | ||
| 5.47 | 0.077kw/r/min | ||
| 5.81 | 0.070kw/r/min | ||
| Control way | Push-and-pull flexible shaft, electrically | ||
| Rated thrust | 29.4KN | ||
| Center distance | 225mm | ||
| L×W×H | 578×744×830mm | ||
| Net weight | 470kg | ||
| Flywheel | 6135Ca,SAE14 | ||
| Bell housing | 6135Ca,SAE1 | ||
Marine Gearbox 120B possesses functions of speed reduction, ahead and astern clutching and bearing propeller thrust. It is designed of vertically offset and one-stage transmission, featuring in small in volume, light in weight and easy in dismantle & reassemble and maintain.
| Input speed | 750-1800r/min | ||
| Reduction ratio | 2.03,2.81 | Trans. capacity | 0.088kw/r/min |
| 3.73 | 0.044kw/r/min | ||
| Control way | Push-and-pull flexible shaft, electrically | ||
| Rated thrust | 25KN | ||
| Center distance | 190mm | ||
| L×W×H | 605×744×770mm | ||
| Net weight | 400kg | ||
| Flywheel | 6135Ca,4120,SAE14 | ||
| Bell housing | 6135Ca,4120,SAE1 | ||
Marine Gearbox 06 possesses functions of speed reduction, ahead and astern clutching and bearing propeller thrust. It is mechanically controlled, featuring in small in volume and light in weight.
| Input speed | 1000-2100r/min | ||
| Reduction ratio | 2.52,3.05,3.50 | Trans. capacity | 0.004kw/r/min |
| Control way | Manually | ||
| Rated thrust | 1.8KN | ||
| Center distance | 124mm | ||
| L×W×H | 350×316×482mm | ||
| Net weight | 58kg | ||
| Flywheel | 195C | ||
| Bell housing | 195C | ||
ADVANCE Marine Gearbox D300A is suitable for fishing, tug, engineering and transport boats
Marine Gearbox D300A possesses functions of speed reduction, ahead and astern clutching and bearing propeller thrust. It is designed of vertically offset and one-stage transmission, featuring in small in volume, large in ratio, light in weight and easy in dismantle & reassemble and maintain.
Marine Gearbox 300 possesses functions of speed reduction, ahead and astern clutching and bearing propeller thrust. It is designed of vertically offset and one-stage transmission, featuring in small in volume, large in ratio, light in weight and easy in dismantle & reassemble and maintain.
| Input speed | 1000-2500r/min | ||
| Reduction ratio | 4.00 | Trans. capacity | 0.257kw/r/min |
| 4.48 | 0.243kw/r/min | ||
| 5.05 | 0.221kw/r/min | ||
| 5.52,5.90 | 0.184kw/r/min | ||
| 6.56,7.06 | 0.147kw/r/min | ||
| 7.63 | 0.125kw/r/min | ||
| Control way | Push-and-pull flexible shaft, electrically, pneumatically | ||
| Rated thrust | 60KN | ||
| Center distance | 355mm | ||
| L×W×H | 786×980×1041mm | ||
| Net weight | 940kg | ||
| Flywheel | 12V135,SAE18,16,14 | ||
| Bell housing | 12V135,SAE0,1 | ||
| Input speed | 750-2500r/min | ||
| Reduction ratio | 1.87,2.04,2.54 | Trans. capacity | 0.257kw/r/min |
| 3.00 | 0.243kw/r/min | ||
| 3.53 | 0.221kw/r/min | ||
| 4.10,4.47,4.61 | 0.184kw/r/min | ||
| 4.94 | 0.147kw/r/min | ||
| 5.44 | 0.125kw/r/min | ||
| Control way | Push-and-pull flexible shaft, electrically, pneumatically | ||
| Rated thrust | 50KN | ||
| Center distance | 264mm | ||
| L×W×H | 786×930×864mm | ||
| Net weight | 740kg | ||
| Flywheel | 12V135,12V150,SAE18,16,14 | ||
| Bell housing | 12V135,12V150,SAE0,1
|
||
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| Application: | Marine |
|---|---|
| Function: | Speed Reduction |
| Layout: | Cycloidal |
| Hardness: | Soft Tooth Surface |
| Installation: | Oscillating Base Type |
| Step: | Double-Step |
| Customization: |
Available
| Customized Request |
|---|
How to Calculate Gear Ratio in a Gearbox
Gear ratio is a fundamental parameter in a gearbox that represents the ratio of the number of teeth between two gears. It determines how much the output gear rotates in relation to the input gear. The formula to calculate gear ratio is:
Gear Ratio (GR) = Number of Teeth on Output Gear / Number of Teeth on Input Gear
Here’s a step-by-step guide on how to calculate gear ratio:
- Identify the input and output gears in the gearbox.
- Count the number of teeth on the output gear (the gear connected to the output shaft).
- Count the number of teeth on the input gear (the gear connected to the input shaft).
- Plug the values into the gear ratio formula: GR = Number of Teeth on Output Gear / Number of Teeth on Input Gear.
- Calculate the gear ratio by performing the division.
The gear ratio provides insight into how much the input gear needs to rotate to achieve a certain rotation of the output gear. It influences torque, speed, and direction of rotation in the gearbox.
editor by CX 2024-05-08
China Standard Hangzhou Marine Speed Reduction Gearbox Hc1000 for Boats best automatic gearbox
Product Description
HangZhou Marine Speed Reduction Gearbox HC1000 for Boats
HangZhou Advance Gearbox Group Co., Ltd. is specialized in designing and manufacturing transmissions and powder metallurgical products, which is 1 of major high- and new-tech enterprises in China.
The Company with the former name “HangZhou Gearbox Works” was founded in 1960. Approved by State Economy and Trade Commission, the Company was restructured into a liability limited company with diversified state shares in 2001 and in 2008 the Company was restructured into a joint-stock limited company.The Company has been listed on ZheJiang Stock Exchange since October 2571. Located by the south bank of Qiantang River, the Company owns 568,000 area, 2600-odd employees, 19 affiliated companies. The Company is awarded as “Leading Company in China Industry Area”, “Top 500 in China Machinery Industry”, “Top 500 Competitive Big Enterprise and Big Group in China”. Technology Center of the Company was awarded as state-level technology center. The “Key Technology and Industrialization of High-end Heavy Gear Transmission” was awarded as Second Prize of National Prize for Progress in Science and Technology.
Marine Gearbox HC1000 possesses functions of speed reduction, ahead and astern clutching and bearing propeller thrust. It is designed of vertically offset and one-stage transmission, featuring in compact in structure and easy in dismantle & reassemble and maintain.
| Input speed | 600-1900r/min | ||
| Reduction ratio | 2,2.5,3.04,3.48 | Trans. capacity | 0.735kw/r/min |
| 4.06 | 0.65kw/r/min | ||
| Control way | Push-and-pull flexible shaft, electrically, pneumatically | ||
| Rated thrust | 110KN | ||
| Center distance | 335mm | ||
| L×W×H | mm | ||
| Net weight | 1700kg | ||
| Flywheel | Depend on engine flywheel | ||
| Bell housing | SAE00,0 | ||
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| Application: | Marine |
|---|---|
| Function: | Speed Reduction |
| Layout: | Cycloidal |
| Hardness: | Hardened Tooth Surface |
| Installation: | Vertical Type |
| Step: | Single-Step |
| Customization: |
Available
| Customized Request |
|---|
How to Choose the Right Gearbox for Your Machinery
Selecting the appropriate gearbox for your machinery involves careful consideration of several key factors. Here’s a step-by-step guide to help you make the right choice:
- Identify Application Requirements: Understand the specific requirements of your machinery, including torque, speed, load, direction of rotation, and duty cycle.
- Choose Gear Type: Determine the type of gears that best suit your needs, such as spur, helical, bevel, planetary, or others, based on factors like efficiency, noise level, and space constraints.
- Calculate Gear Ratio: Calculate the required gear ratio to achieve the desired output speed and torque. Consider factors like input and output shaft speeds.
- Select Gear Material: Choose appropriate gear materials based on factors like durability, wear resistance, and corrosion resistance. Common materials include steel, cast iron, and various alloys.
- Consider Efficiency: Evaluate the gearbox’s efficiency and select one that meets your energy efficiency requirements.
- Account for Load Conditions: Analyze the load conditions, such as constant or intermittent loads, shock loads, and starting and stopping frequencies.
- Check Lubrication Requirements: Consider the lubrication needs of the gearbox and ensure proper lubrication for smooth operation and longevity.
- Factor in Space Constraints: Consider the available space for installing the gearbox and choose a size that fits within your machinery.
- Assess Environmental Conditions: Evaluate the operating environment, including temperature, humidity, and exposure to dust or corrosive substances.
- Review Mounting Options: Determine the mounting options that work best for your machinery, such as foot-mounted, flange-mounted, or shaft-mounted gearboxes.
- Consult with Experts: Seek advice from gearbox manufacturers or engineers to ensure you make an informed decision.
Choosing the right gearbox is crucial for achieving optimal machinery performance, longevity, and reliability.
editor by CX 2024-05-06
China Professional Marine Gearbox 135 Advance Marine Gearbox for Boat gearbox and motor
Product Description
Product Overview
Marine Gearbox 135 Advance Marine Gearbox For Boat
|
135 Marine Gearbox |
|
|
||||
|
Output Speed(r/min) |
750~2000 |
|
|
|||
|
Reduction Ratio i |
2.03 2.59 3.04 3.62 4.11 |
4.65 |
5.06 |
5.47 |
5.81 |
|
|
Transfer ability |
0.100 |
0.093 |
0.088 |
0.077 |
0.070 |
|
|
Rated Propeller Thrust |
29.4KN |
Center Distance |
225mm |
|
|
|
|
Application |
Marine, Boat |
Engine Housing |
6135Ca SAE 1 |
|
|
|
|
Brand |
ADVANCE |
Flywheel |
6135Ca SAE 14 |
|
|
|
|
L*W*H |
Net Weight |
470KG |
|
|||
Factory Overview
Delivery
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| Application: | Machinery, Marine |
|---|---|
| Function: | Distribution Power, Clutch, Change Drive Torque, Change Drive Direction, Speed Changing, Speed Reduction, Speed Increase |
| Transport Package: | Wooden Box |
| Specification: | 578*744*830 470kg |
| Trademark: | Hangzhou Advance |
| Origin: | Hangzhou |
| Customization: |
Available
| Customized Request |
|---|
Benefits of Regular Gearbox Maintenance
Regular maintenance of gearboxes offers numerous advantages:
- Extended Lifespan: Proper maintenance helps prevent premature wear and breakdown, increasing the gearbox’s overall lifespan.
- Reduced Downtime: Regular inspections and maintenance can identify issues early, minimizing unplanned downtime for repairs.
- Improved Efficiency: Well-maintained gearboxes operate more efficiently, leading to energy savings and optimized performance.
- Cost Savings: Routine maintenance reduces the need for costly major repairs or replacements.
- Enhanced Safety: Regular maintenance ensures safe operation by addressing potential hazards and malfunctions.
- Optimal Performance: Properly maintained gearboxes deliver consistent and reliable performance for machinery and equipment.
- Preserved Functionality: Maintenance prevents issues that could lead to reduced functionality or complete failure.
- Reduced Environmental Impact: Well-maintained gearboxes consume less energy and minimize waste, contributing to sustainability efforts.
- Compliance: Regular maintenance helps meet industry regulations and standards for equipment safety and performance.
Implementing a proactive maintenance plan can provide these benefits and contribute to the overall success of your machinery and operations.
editor by CX 2024-04-17
China Standard Advance 1000-1800rpm Speed Marine Gearbox Hcd400A gearbox adjustment
Product Description
Advance 1000-1800rpm speed marine gearbox HCD400A
The diesel engine has the highest thermal efficiency (engine efficiency) of any practical internal or external combustion engine due to its very high expansion ratio and inherent lean burn which enables heat dissipation by the excess air. A small efficiency loss is also avoided compared to two-stroke non-direct-injection gasoline engines since unburned fuel is not present at valve overlap and therefore no fuel goes directly from the intake/injection to the exhaust. Low-speed diesel engines (as used in ships and other applications where overall engine weight is relatively unimportant) can have a thermal efficiency that exceeds 50%.
| Product name | Advance 1000-1800rpm speed marine gearbox HCD400A |
| Ratio | 3.96,4.33,4.43,4.70,5.00,5.53,5.71,5.89 |
| Application | marine |
| Warranty | 1 year or 1500h which occur first |
| Delivery | By sea,by air,by express |
| Package | 1. Wooden case 2. As customer requirement |
| Features | 1.High anti-galling properties 2.Less wear on the cylinder liner itself 3.Less wear on the partner piston ring 4.Less consumption of lubricant |
| Application: | Marine |
|---|---|
| Function: | Speed Changing |
| Product Name: | Advance 1000-1800rpm Speed Marine Gearbox Hcd400A |
| Engine Model: | Hcd400A |
| Input Speed: | 1000-1800rpm |
| Output Torque: | 82kn |
| Customization: |
Available
| Customized Request |
|---|
Benefits of Regular Gearbox Maintenance
Regular maintenance of gearboxes offers numerous advantages:
- Extended Lifespan: Proper maintenance helps prevent premature wear and breakdown, increasing the gearbox’s overall lifespan.
- Reduced Downtime: Regular inspections and maintenance can identify issues early, minimizing unplanned downtime for repairs.
- Improved Efficiency: Well-maintained gearboxes operate more efficiently, leading to energy savings and optimized performance.
- Cost Savings: Routine maintenance reduces the need for costly major repairs or replacements.
- Enhanced Safety: Regular maintenance ensures safe operation by addressing potential hazards and malfunctions.
- Optimal Performance: Properly maintained gearboxes deliver consistent and reliable performance for machinery and equipment.
- Preserved Functionality: Maintenance prevents issues that could lead to reduced functionality or complete failure.
- Reduced Environmental Impact: Well-maintained gearboxes consume less energy and minimize waste, contributing to sustainability efforts.
- Compliance: Regular maintenance helps meet industry regulations and standards for equipment safety and performance.
Implementing a proactive maintenance plan can provide these benefits and contribute to the overall success of your machinery and operations.
editor by CX 2023-10-30
China Professional in Stock CZPT D300 Marine Gearbox best automatic gearbox
Product Description
Advance Marine Gearbox 120C hydraulic marine gearbox hydraulic marine gearbox
* Felxible -can be customerized according to customer’s request, drawing will be submitted for approval. Such as taking off radiator and replacing with the heat exchanging system, total power solution such as gear box coupling and canopy design.
*Durability- With engines have been engineered to meet the durability and performance needs of marine applications and seawater cooling options and controls seamlessly integrated to ensure the propulsion for your vessel meets your needs.
* Long-Life Expectancy – these critical parts are manufactured by leading companies, other part comes from reliable manufacturers, these sets guarantee long functional life, outstanding performance, and high efficiency.
* Easy availability of the spare parts — the key parts are same as parts for vehicle diesel engine,better exchange and universality and durable.
* Easy maintenance -Diesel engine not require heavy maintenance. It is very easy, safe, and simple to use. Well-planned and preventive maintenance measures are generally available for these sets which are also low in cost.
Product Description
HangZhou ADVANCE HCT1100 Gearbox
HangZhou ADVANCE produces the best gearbox in China.
1100 series marine gearboxes have the functions of reversing, clutching, decelerating and bearing propeller thrust.
The series gearboxes have the features of compact structure, large speed ratio range, large load capacity, large thrust bearing, easy disassembly and maintenance, etc.
Product Parameters
| Input Speed | 700~1800r/min | ||
| Reduction Ratio (i) | 4.94,5.60,5.98,6.39 | Transmission Capacity (kW/r/min) | 0.846 |
| 6.85 | 0.835 | ||
| 7.35 | 0.772 | ||
| 7.9 | 0.736 | ||
| Maneuver Type | Push-pull flexible Shaft , Electric control , Pneumatic control | ||
| Center Distance | 500mm | ||
| Rated Thrust | 150KN | ||
| L×W×H | 1150*1350*1547mm | ||
| Net Weight | 3000kg | ||
| Coupling Flywheel | Matched by flywheel | ||
| Coupling Housing | No housing | ||
Product Configuration
CUSTOMIZE YOUR MACHINE
Oil Pressure Gauge and Alarm Device
Oil Temperature Gauge and Alarm Device
SAE Flywheel Housing Options
Hydraulic Pressure Low Alarm
Solenoid Controlled Switch
…….
CONTACT US FOR MORE DETAILS YOU NEED!
Company Profile
HangZhou LionHeart Power Equipment Co., Ltd., a subsidiary of 1 of the nation’s top marine services company —- HangZhou Agricultural Machinery Co., Ltd., is a provider of marine equipment worldwide. Our company is committed to providing the best solution to our customer’s project since 1996. With over 20 years of profound experience in the marine services industry, our company has set up a professional and customer-friendly system in our every pre-sales, shipping and after-sales process to ensure your worry-free shopping experience. We ship our brand-new products all over the world, at the best prices on the Web.
LionHeart Power is a professional provider for equipment like marine engines, generators, gearboxes, propellers, marine interior fit-out, deck machinery and related marine spare parts. Our processes and procedures are designed to present the perfect product that will meet or exceed the expectations of every 1 of our customers. We back up that commitment with comprehensive services through the product’s whole life cycle, along with our key technologies and leading product expertise. That is the reason why we stand out as the nation’s marine equipment sales champion of multiple brands for over 10 consecutive years.
LionHeart Power carries 1 of the nation’s largest inventories of marine equipment and related parts from 20+ manufacturers such as Weichai, HangZhou Advance, Deutz, Steyr, Zichai, CHINAMFG and more, among which the CHINAMFG and ADVANCE series are fully covered. Specifically, that inventory is meticulously organized over 57 acres outside and 118, 000 sq. FT. Of warehouse under roof. That means our products are generally in stock for immediate availability. Besides, we are proud of our resource plHangZhou system of products, which is unparalleled in the industry, offering you the shortest lead time and efficient service.
LionHeart Power’s staff is expertly trained not only to quickly locate the products you’re looking for, but also to meet your project requirements with the best solution. If what you are looking for is not ‘on the shelf’, we will customize it for you. This strength builds CHINAMFG our CHINAMFG partnership with various manufacturers and production institutes. Efficiency and service are the goals of every member of our organization. LionHeart Power knows your time is valuable and we produce this value for you. Quality equipment and expertly-trained service technicians, combined with our extensive inventory, give you the edge in your commercial and industrial success.
Certifications
Packaging & Shipping
1.Processing
Orders are usually packed and ready to ship in 1 to 3 business days if the products are in stock. However shipments are subiect to required manufacturing time and customs clearance procedures. which can cause delays beyond original delivery estimates. For detailed delivery information, please contact customer service.
2.Packing Methods
Normally we use wooden boxes for packaging or we can pack it according to your special needs.
3.Shipping Methods
We are happy to offer a variety of shipping methods. Shipping methods available: EXW. FOB.CER. CIF.
4. International Returns & Exchanges
Unfortunately we can’t accept retums on intemational orders. We will test each product before dellverv One-year manufacturer warranty is quaranteed on our complete machines and 3 months on spare parts. I1 you have any concerns with your order, please reach out to customer service
5.Payment Methods
We sugqest 50/50 T/T payment method: 50 percent down payment on placement of the order, with the remaining 50% due CHINAMFG shipment. We also accept L/C, Trade Assurance, Visa transfer and Paypal
| Application: | Machinery, Marine |
|---|---|
| Function: | Distribution Power, Clutch, Change Drive Torque, Change Drive Direction, Speed Changing, Speed Reduction, Speed Increase |
| Certificate: | CCS |
| Transport Package: | Wooden Box |
| Specification: | 1150*1350*1547mm, 3000kg |
| Trademark: | Hangzhou Advance |
Steps to Replace a Faulty Gearbox in an Automobile
Replacing a faulty gearbox in an automobile is a complex task that requires proper tools, skills, and safety precautions. Here are the general steps involved in the process:
- Prepare the Vehicle: Park the vehicle on a flat surface and engage the parking brake. Disconnect the battery to ensure safety during the procedure.
- Drain Fluids: Drain the transmission fluid from the old gearbox into a suitable container.
- Disconnect Components: Remove any components obstructing access to the gearbox, such as the driveshaft, exhaust system, and linkage.
- Suspend the Engine: If necessary, use an engine hoist or support to suspend the engine safely.
- Support the Gearbox: Use a transmission jack to support the weight of the gearbox.
- Remove Gearbox: Detach the gearbox from the engine by removing bolts and disconnecting the clutch or torque converter.
- Install New Gearbox: Position the new gearbox onto the engine and secure it in place with bolts.
- Reconnect Components: Reattach the driveshaft, exhaust system, and linkage that were disconnected earlier.
- Refill Fluids: Fill the new gearbox with the appropriate transmission fluid according to the manufacturer’s specifications.
- Lower Engine: Carefully lower the engine back into its original position if it was suspended.
- Test and Adjust: Start the vehicle and test the new gearbox for proper operation. Check for any leaks, unusual noises, or gear shifting issues.
- Final Check: Double-check all connections and ensure that all components are properly secured.
- Dispose of Old Fluid: Dispose of the old transmission fluid safely and responsibly.
- Dispose of Old Gearbox: Properly dispose of the old gearbox according to local regulations.
It’s important to note that gearbox replacement can vary significantly depending on the vehicle’s make and model. It’s recommended to consult the vehicle’s service manual or seek professional assistance if you’re not experienced in automotive repair.
editor by CX 2023-10-27
China supplier CZPT Marine Gearbox Hc1200 Hct1200 Ratio 3: 1 for Sale with high quality
Product Description
HangZhou ADVANCE Gearbox
Marine GearboxHC-series marine gearbox self-developed by the company is of power ranging 10kW-3000kw, ratio ranging 1.5-20:1, complete in specifications, high market share, widely used in heavy loaded ships such as transport, fishing and engineering boats. Product design and manufacturing capability are in leading nationally and advanced internationally level.
| Input Speed | 1000~2500r/min | ||
| Reduction Ratio (i) | 1.48,1.94,2.45 | Transmission Capacity (kW/r/min) | 0.1 |
| 2.96 | 0.09 | ||
| 3.35 | 0.08 | ||
| Maneuver Type | Push-pull flexible Shaft, Electric control | ||
| Center Distance | 180mm | ||
| Rated Thrust | 25KN | ||
| L×W×H | 432*440*650mm | ||
| Net Weight | 225kg | ||
| Coupling Flywheel | 6135Ca,SAE14/11.5 | ||
| Coupling Housing | 6135Ca,SAE1/2/3 | ||
Description
Marine Gearbox 120B possesses functions of speed reduction, ahead and astern clutching and bearing propeller thrust. It is designed of vertically offset and one-stage transmission, featuring in small in volume, light in weight and easy in dismantle & reassemble and maintain.
1.Processing
Orders are usually packed and ready to ship in 1 to 3 business days if the products are in stock. However shipments are subiect to required manufacturing time and customs clearance procedures. which can cause delays beyond original delivery estimates. For detailed delivery information, please contact customer service.
2.Packing Methods
Normally we use wooden boxes for packaging or we can pack it according to your special needs.
3.Shipping Methods
We are happy to offer a variety of shipping methods. Shipping methods available: EXW. FOB.CER. CIF.
4. International Returns & Exchanges
Unfortunately we can’t accept retums on intemational orders. We will test each product before dellverv One-year manufacturer warranty is quaranteed on our complete machines and 3 months on spare parts. I1 you have any concerns with your order, please reach out to customer service
5.Payment Methods
We sugqest 50/50 T/T payment method: 50 percent down payment on placement of the order, with the remaining 50% due CHINAMFG shipment. We also accept L/C, Trade Assurance, Visa transfer and Paypal
| Application: | Machinery, Marine |
|---|---|
| Function: | Distribution Power, Clutch, Change Drive Torque, Change Drive Direction, Speed Changing, Speed Reduction, Speed Increase |
| Hardness: | Hardened Tooth Surface |
| Installation: | Vertical Type |
| Step: | Single-Step |
| Type: | Gear Reducer |
Steps to Replace a Faulty Gearbox in an Automobile
Replacing a faulty gearbox in an automobile is a complex task that requires proper tools, skills, and safety precautions. Here are the general steps involved in the process:
- Prepare the Vehicle: Park the vehicle on a flat surface and engage the parking brake. Disconnect the battery to ensure safety during the procedure.
- Drain Fluids: Drain the transmission fluid from the old gearbox into a suitable container.
- Disconnect Components: Remove any components obstructing access to the gearbox, such as the driveshaft, exhaust system, and linkage.
- Suspend the Engine: If necessary, use an engine hoist or support to suspend the engine safely.
- Support the Gearbox: Use a transmission jack to support the weight of the gearbox.
- Remove Gearbox: Detach the gearbox from the engine by removing bolts and disconnecting the clutch or torque converter.
- Install New Gearbox: Position the new gearbox onto the engine and secure it in place with bolts.
- Reconnect Components: Reattach the driveshaft, exhaust system, and linkage that were disconnected earlier.
- Refill Fluids: Fill the new gearbox with the appropriate transmission fluid according to the manufacturer’s specifications.
- Lower Engine: Carefully lower the engine back into its original position if it was suspended.
- Test and Adjust: Start the vehicle and test the new gearbox for proper operation. Check for any leaks, unusual noises, or gear shifting issues.
- Final Check: Double-check all connections and ensure that all components are properly secured.
- Dispose of Old Fluid: Dispose of the old transmission fluid safely and responsibly.
- Dispose of Old Gearbox: Properly dispose of the old gearbox according to local regulations.
It’s important to note that gearbox replacement can vary significantly depending on the vehicle’s make and model. It’s recommended to consult the vehicle’s service manual or seek professional assistance if you’re not experienced in automotive repair.
editor by CX 2023-10-26
China manufacturer Advance 300 Marine Gearbox for Marine Reverse Transmission with Hot selling
Product Description
Advance 300 Marine Gearbox for Marine Reverse Transmission
| Engine Model | Advance 300 |
| Displacement | |
| Application | Fishing boat/tug boat and other working boat or player boat |
| Bore*Stroke | |
| Rate power and RPM | |
| Cooling Method | |
| Engine Type | |
| Oil supply way | |
| Aspiration | |
| Package | Wooden case |
| Warranty | 1 year or 1500 running hours which come first |
Features & Benefits
* Felxible -can be customerized according to customer’s request, drawing will be submitted for approval. Such as taking off radiator and replacing with the heat exchanging system, total power solution such as gear box coupling and canopy design.
*Durability- With engines have been engineered to meet the durability and performance needs of construcation applications and seawater cooling options and controls seamlessly integrated to ensure the propulsion for your vessel meets your needs.
* Long-Life Expectancy – these critical parts are manufactured by leading companies, other part comes from reliable manufacturers, these sets guarantee long functional life, outstanding performance, and high efficiency.
* Easy availability of the spare parts — the key parts are same as parts for vehicle diesel engine,better exchange and universality and durable.
* Easy maintenance -Diesel engine not require heavy maintenance. It is very easy, safe, and simple to use. Well-planned and preventive maintenance measures are generally available for these sets which are also low in cost.
Company Profile
As a leading manufacturer and supplier in China, we are specialized in complete engine and spare parts. Such as crankshaft, camshaft, con rod, cylinder head, cylinder block, cylinder liner, piston, piston ring, engine valve, engine bearing, oil nozzle, oil seal, oil pump, fuel pump, water pump, turbocharger, and so on
our products have exported many countrys .We are also the supplier for China DEUTZ/KHD, CHINAMFG as well as MTU, KKK Germany
We also supply the china products which are made by joint venture with international engine and engine parts ,for example Elring, Payen, Federal-mogul, TP, Holset, S.Valeo, Garrett, Borg-Warner, KKK, Eaton, Fuller, GKN, Thomson products which made in China under strict quality control and international quality standards.
We aim to be a top class supplier for CHINAMFG OEM and aftermarket!
hope build good business relationship with all company which is do business in this field
Equipment test
Our company has high-speed precision punching machine,automatic mesh belt quenching furnace,automatic assembly line and other advanced equipment chain,as well as the industry’s most complete materials and chain technology development and testing equipment,all aspects of the performance of all aspects of product testing,to meet the eligibility criteria before leaving the factory.Quality is our culture all the engine will be tested before leaving the factory we are proud to say that in our years of international trading experience,we never had a single order returned to us,For all ore clients,you will receive exactly what you ordered,and you will get it on time and we live by the principle that customer comes first.
Package
All warehouse staffs must be strict comply with the standard operating procedures for daily handing.The data of inbound & outbound must be clearly and accurately passed to the data team from inventory team timely.
The normal package is wooden box if export to european countries,the wooden box will be fumigated.If container is too tigher,we will use pe film for packing or pack it according to customers special request.
Certificate
Our company specialized in diesel engine and spare parts more than 15 years and the products has passed ISO9001 and SGS international quality management system certification and be recognized to be high-tech enterprises and High-tech products.
Our Service
1) Quality is our culture — We are proud to say that in our years of international trading experience, we never had a single order returned to us.
2) Time is Gold — For all our clients, you will receive exactly what you ordered, and you will receive it on time
3)After sending, we will track the products for you once every 2 days, until you get the products. When you got the
goods, test them, and give me a feedback.If you have any questions about the problem, contact with us, we will offer
the solve way for you
4) Super Value — We have much cost advantage. By choosing us, you can increase profit.
5) Great Services — We live by the principle that customer comes first.
6) Sample order is accepted.
7) Your choice make different !
FAQ
Q1. What is your terms of packing?
A: Generally, we pack our goods in neutral white boxes and brown cartons. If you have legally registered patent,
we can pack the goods in your branded boxes after getting your authorization letters.
Q2. What is your terms of payment?
A: T/T 30% as deposit, and 70% before delivery. We’ll show you the photos of the products and packages
before you pay the balance.
Q3. What is your terms of delivery?
A: EXW, FOB, CFR, CIF, DDU.
Q4. How about your delivery time?
A: Generally, it will take 30 to 60 days after receiving your advance payment. The specific delivery time depends
on the items and the quantity of your order.
Q5. Can you produce according to the samples?
A: Yes, we can produce by your samples or technical drawings. We can build the molds and fixtures.
Q6. What is your sample policy?
A: We can supply the sample if we have ready parts in stock, but the customers have to pay the sample cost and
the courier cost.
Q7: How do you make our business long-term and good relationship?
A:1. We keep good quality and competitive price to ensure our customers benefit ;
2. We respect every customer as our friend and we sincerely do business and make friends with them,
no matter where they come from.
| Application: | Motor, Marine |
|---|---|
| Function: | Distribution Power |
| Layout: | Three-Ring |
| Hardness: | Soft Tooth Surface |
| Installation: | Torque Arm Type |
| Step: | Stepless |
| Customization: |
Available
| Customized Request |
|---|
Steps to Replace a Faulty Gearbox in an Automobile
Replacing a faulty gearbox in an automobile is a complex task that requires proper tools, skills, and safety precautions. Here are the general steps involved in the process:
- Prepare the Vehicle: Park the vehicle on a flat surface and engage the parking brake. Disconnect the battery to ensure safety during the procedure.
- Drain Fluids: Drain the transmission fluid from the old gearbox into a suitable container.
- Disconnect Components: Remove any components obstructing access to the gearbox, such as the driveshaft, exhaust system, and linkage.
- Suspend the Engine: If necessary, use an engine hoist or support to suspend the engine safely.
- Support the Gearbox: Use a transmission jack to support the weight of the gearbox.
- Remove Gearbox: Detach the gearbox from the engine by removing bolts and disconnecting the clutch or torque converter.
- Install New Gearbox: Position the new gearbox onto the engine and secure it in place with bolts.
- Reconnect Components: Reattach the driveshaft, exhaust system, and linkage that were disconnected earlier.
- Refill Fluids: Fill the new gearbox with the appropriate transmission fluid according to the manufacturer’s specifications.
- Lower Engine: Carefully lower the engine back into its original position if it was suspended.
- Test and Adjust: Start the vehicle and test the new gearbox for proper operation. Check for any leaks, unusual noises, or gear shifting issues.
- Final Check: Double-check all connections and ensure that all components are properly secured.
- Dispose of Old Fluid: Dispose of the old transmission fluid safely and responsibly.
- Dispose of Old Gearbox: Properly dispose of the old gearbox according to local regulations.
It’s important to note that gearbox replacement can vary significantly depending on the vehicle’s make and model. It’s recommended to consult the vehicle’s service manual or seek professional assistance if you’re not experienced in automotive repair.
editor by CX 2023-10-19
China Standard Factory Supply Advance Marine Transmission Gearbox for Boat Hct1100 planetary gearbox
Product Description
HangZhou ADVANCE Gearbox
| Input Speed | 1000~2500r/min | ||
| Reduction Ratio (i) | 1.48,1.94,2.45 | Transmission Capacity (kW/r/min) | 0.1 |
| 2.96 | 0.09 | ||
| 3.35 | 0.08 | ||
| Maneuver Type | Push-pull flexible Shaft, Electric control | ||
| Center Distance | 180mm | ||
| Rated Thrust | 25KN | ||
| L×W×H | 432*440*650mm | ||
| Net Weight | 225kg | ||
| Coupling Flywheel | 6135Ca,SAE14/11.5 | ||
| Coupling Housing | 6135Ca,SAE1/2/3 | ||
Description
Marine Gearbox 120B possesses functions of speed reduction, ahead and astern clutching and bearing propeller thrust. It is designed of vertically offset and one-stage transmission, featuring in small in volume, light in weight and easy in dismantle & reassemble and maintain.
1.Processing
Orders are usually packed and ready to ship in 1 to 3 business days if the products are in stock. However shipments are subiect to required manufacturing time and customs clearance procedures. which can cause delays beyond original delivery estimates. For detailed delivery information, please contact customer service.
2.Packing Methods
Normally we use wooden boxes for packaging or we can pack it according to your special needs.
3.Shipping Methods
We are happy to offer a variety of shipping methods. Shipping methods available: EXW. FOB.CER. CIF.
4. International Returns & Exchanges
Unfortunately we can’t accept retums on intemational orders. We will test each product before dellverv One-year manufacturer warranty is quaranteed on our complete machines and 3 months on spare parts. I1 you have any concerns with your order, please reach out to customer service
5.Payment Methods
We sugqest 50/50 T/T payment method: 50 percent down payment on placement of the order, with the remaining 50% due CHINAMFG shipment. We also accept L/C, Trade Assurance, Visa transfer and Paypal
| Application: | Machinery, Marine |
|---|---|
| Function: | Distribution Power, Clutch, Change Drive Torque, Change Drive Direction, Speed Changing, Speed Reduction, Speed Increase |
| Hardness: | Hardened Tooth Surface |
| Installation: | Vertical Type |
| Step: | Single-Step |
| Type: | Gear Reducer |
Importance of Lubrication in Gearbox Performance
Lubrication plays a critical role in ensuring the optimal performance, longevity, and reliability of gearboxes. Proper lubrication provides several key benefits:
- Reduces Friction and Wear: Lubrication forms a protective layer between gear teeth, bearings, and other moving components, reducing friction and minimizing wear and tear.
- Heat Dissipation: Lubricants help dissipate the heat generated during gear operation, preventing overheating and potential damage to components.
- Noise Reduction: Adequate lubrication can dampen noise and vibration produced by gear meshing, leading to quieter and smoother operation.
- Sealing and Contaminant Prevention: Lubricants create a barrier that seals out contaminants like dust, dirt, and moisture, preventing their entry and reducing the risk of corrosion and damage.
- Enhanced Efficiency: Proper lubrication reduces energy losses due to friction, improving the overall efficiency of the gearbox.
- Extended Lifespan: Lubrication helps prevent premature component wear and failure, extending the lifespan of the gearbox and minimizing the need for costly repairs or replacements.
- Optimal Performance: Gearboxes operate within specified tolerances when properly lubricated, ensuring they deliver the intended performance and functionality.
It’s essential to use the recommended lubricant type, viscosity, and change intervals specified by the gearbox manufacturer to ensure the best possible performance and longevity. Regular monitoring and maintenance of lubrication levels are crucial to preserving the health of the gearbox and its components.
editor by CX 2023-10-19
China Standard Factory Supply CZPT Marine Gearbox Hc038A Ratio 3: 1 for Boat gearbox and motor
Product Description
HangZhou ADVANCE Gearbox
Marine GearboxHC-series marine gearbox self-developed by the company is of power ranging 10kW-3000kw, ratio ranging 1.5-20:1, complete in specifications, high market share, widely used in heavy loaded ships such as transport, fishing and engineering boats. Product design and manufacturing capability are in leading nationally and advanced internationally level.
| Input Speed | 1000~2500r/min | ||
| Reduction Ratio (i) | 1.48,1.94,2.45 | Transmission Capacity (kW/r/min) | 0.1 |
| 2.96 | 0.09 | ||
| 3.35 | 0.08 | ||
| Maneuver Type | Push-pull flexible Shaft, Electric control | ||
| Center Distance | 180mm | ||
| Rated Thrust | 25KN | ||
| L×W×H | 432*440*650mm | ||
| Net Weight | 225kg | ||
| Coupling Flywheel | 6135Ca,SAE14/11.5 | ||
| Coupling Housing | 6135Ca,SAE1/2/3 | ||
Description
Marine Gearbox 120B possesses functions of speed reduction, ahead and astern clutching and bearing propeller thrust. It is designed of vertically offset and one-stage transmission, featuring in small in volume, light in weight and easy in dismantle & reassemble and maintain.
1.Processing
Orders are usually packed and ready to ship in 1 to 3 business days if the products are in stock. However shipments are subiect to required manufacturing time and customs clearance procedures. which can cause delays beyond original delivery estimates. For detailed delivery information, please contact customer service.
2.Packing Methods
Normally we use wooden boxes for packaging or we can pack it according to your special needs.
3.Shipping Methods
We are happy to offer a variety of shipping methods. Shipping methods available: EXW. FOB.CER. CIF.
4. International Returns & Exchanges
Unfortunately we can’t accept retums on intemational orders. We will test each product before dellverv One-year manufacturer warranty is quaranteed on our complete machines and 3 months on spare parts. I1 you have any concerns with your order, please reach out to customer service
5.Payment Methods
We sugqest 50/50 T/T payment method: 50 percent down payment on placement of the order, with the remaining 50% due CHINAMFG shipment. We also accept L/C, Trade Assurance, Visa transfer and Paypal
| Application: | Machinery, Marine |
|---|---|
| Function: | Distribution Power, Clutch, Change Drive Torque, Change Drive Direction, Speed Changing, Speed Reduction, Speed Increase |
| Hardness: | Hardened Tooth Surface |
| Installation: | Vertical Type |
| Step: | Single-Step |
| Type: | Gear Reducer |
Importance of Lubrication in Gearbox Performance
Lubrication plays a critical role in ensuring the optimal performance, longevity, and reliability of gearboxes. Proper lubrication provides several key benefits:
- Reduces Friction and Wear: Lubrication forms a protective layer between gear teeth, bearings, and other moving components, reducing friction and minimizing wear and tear.
- Heat Dissipation: Lubricants help dissipate the heat generated during gear operation, preventing overheating and potential damage to components.
- Noise Reduction: Adequate lubrication can dampen noise and vibration produced by gear meshing, leading to quieter and smoother operation.
- Sealing and Contaminant Prevention: Lubricants create a barrier that seals out contaminants like dust, dirt, and moisture, preventing their entry and reducing the risk of corrosion and damage.
- Enhanced Efficiency: Proper lubrication reduces energy losses due to friction, improving the overall efficiency of the gearbox.
- Extended Lifespan: Lubrication helps prevent premature component wear and failure, extending the lifespan of the gearbox and minimizing the need for costly repairs or replacements.
- Optimal Performance: Gearboxes operate within specified tolerances when properly lubricated, ensuring they deliver the intended performance and functionality.
It’s essential to use the recommended lubricant type, viscosity, and change intervals specified by the gearbox manufacturer to ensure the best possible performance and longevity. Regular monitoring and maintenance of lubrication levels are crucial to preserving the health of the gearbox and its components.
editor by CX 2023-10-17
China best Brand New Advance Ma142 3: 1 Advance Marine Gearbox gearbox design
Product Description
Advance Marine Gearbox 120C hydraulic marine gearbox hydraulic marine gearbox
Marine gearbox 135A performs the duties of CHINAMFG and reverse,engaging and disengaging,reduction,and take the propeller thrust.
Our marine garboxes are listed in City’s Key Project of Technical Reform, have passed ISO9001: 2000 and the brand “Advance” is 1 of the authorized famous brands in HangZhou. Marine gearboxes have passed the quality authentication by ZHangZhoug Shipping Inspection Center of PRC.
Our pleasure is to supply our product to all over the world on the basis of mutual beneficial. We believe our experience and careful service will make cooperation more easily.
If you are interest in our products or have any questions, please do not hesitate to contact us with your inquiries. Thank you!
Product Description
HangZhou ADVANCE HCT1100 Gearbox
HangZhou ADVANCE produces the best gearbox in China.
1100 series marine gearboxes have the functions of reversing, clutching, decelerating and bearing propeller thrust.
The series gearboxes have the features of compact structure, large speed ratio range, large load capacity, large thrust bearing, easy disassembly and maintenance, etc.
Product Parameters
| Input Speed | 700~1800r/min | ||
| Reduction Ratio (i) | 4.94,5.60,5.98,6.39 | Transmission Capacity (kW/r/min) | 0.846 |
| 6.85 | 0.835 | ||
| 7.35 | 0.772 | ||
| 7.9 | 0.736 | ||
| Maneuver Type | Push-pull flexible Shaft , Electric control , Pneumatic control | ||
| Center Distance | 500mm | ||
| Rated Thrust | 150KN | ||
| L×W×H | 1150*1350*1547mm | ||
| Net Weight | 3000kg | ||
| Coupling Flywheel | Matched by flywheel | ||
| Coupling Housing | No housing | ||
Product Configuration
CUSTOMIZE YOUR MACHINE
Oil Pressure Gauge and Alarm Device
Oil Temperature Gauge and Alarm Device
SAE Flywheel Housing Options
Hydraulic Pressure Low Alarm
Solenoid Controlled Switch
…….
CONTACT US FOR MORE DETAILS YOU NEED!
Company Profile
Packaging & Shipping
1.Processing
Orders are usually packed and ready to ship in 1 to 3 business days if the products are in stock. However shipments are subiect to required manufacturing time and customs clearance procedures. which can cause delays beyond original delivery estimates. For detailed delivery information, please contact customer service.
2.Packing Methods
Normally we use wooden boxes for packaging or we can pack it according to your special needs.
3.Shipping Methods
We are happy to offer a variety of shipping methods. Shipping methods available: EXW. FOB.CER. CIF.
4. International Returns & Exchanges
Unfortunately we can’t accept retums on intemational orders. We will test each product before dellverv One-year manufacturer warranty is quaranteed on our complete machines and 3 months on spare parts. I1 you have any concerns with your order, please reach out to customer service
5.Payment Methods
We sugqest 50/50 T/T payment method: 50 percent down payment on placement of the order, with the remaining 50% due CHINAMFG shipment. We also accept L/C, Trade Assurance, Visa transfer and Paypal
| Application: | Machinery, Marine |
|---|---|
| Function: | Distribution Power, Clutch, Change Drive Torque, Change Drive Direction, Speed Changing, Speed Reduction, Speed Increase |
| Certificate: | CCS |
| Transport Package: | Wooden Box |
| Specification: | 1150*1350*1547mm, 3000kg |
| Trademark: | Hangzhou Advance |
How to Choose the Right Gearbox for Your Machinery
Selecting the appropriate gearbox for your machinery involves careful consideration of several key factors. Here’s a step-by-step guide to help you make the right choice:
- Identify Application Requirements: Understand the specific requirements of your machinery, including torque, speed, load, direction of rotation, and duty cycle.
- Choose Gear Type: Determine the type of gears that best suit your needs, such as spur, helical, bevel, planetary, or others, based on factors like efficiency, noise level, and space constraints.
- Calculate Gear Ratio: Calculate the required gear ratio to achieve the desired output speed and torque. Consider factors like input and output shaft speeds.
- Select Gear Material: Choose appropriate gear materials based on factors like durability, wear resistance, and corrosion resistance. Common materials include steel, cast iron, and various alloys.
- Consider Efficiency: Evaluate the gearbox’s efficiency and select one that meets your energy efficiency requirements.
- Account for Load Conditions: Analyze the load conditions, such as constant or intermittent loads, shock loads, and starting and stopping frequencies.
- Check Lubrication Requirements: Consider the lubrication needs of the gearbox and ensure proper lubrication for smooth operation and longevity.
- Factor in Space Constraints: Consider the available space for installing the gearbox and choose a size that fits within your machinery.
- Assess Environmental Conditions: Evaluate the operating environment, including temperature, humidity, and exposure to dust or corrosive substances.
- Review Mounting Options: Determine the mounting options that work best for your machinery, such as foot-mounted, flange-mounted, or shaft-mounted gearboxes.
- Consult with Experts: Seek advice from gearbox manufacturers or engineers to ensure you make an informed decision.
Choosing the right gearbox is crucial for achieving optimal machinery performance, longevity, and reliability.
editor by CX 2023-10-08