Product Description
Bonfiglioli Bonfiglioli speed reducer 715C3B 716C3B 717C3B 718C3B 713C3B CHINAMFG Planetary Gear 710C3 709C3
715C3B15A5718S7MP16WHY CHINAMFG 715 pilling rig machine sany FOR xcmg zoomlion SPARE PARTS.
Cost Effective CHINAMFG 716C3B FINAL DRIVE TRAVEL REDUCTION GEAR BOX
FOR CHINAMFG EC460B FINAL DRIVE 14531093 14608847 TRAVEL REDUCTION GEAR BOX
For CHINAMFG Final Drive
For CHINAMFG Travel Device
For CHINAMFG Traveling Motor
For CHINAMFG Traveling Reduction Gear
For CHINAMFG Swing Device
For CHINAMFG Swing Motor
For CHINAMFG Swing Reduction Gear
For CHINAMFG Main Pump & Pump Parts
For CHINAMFG Axle & Transmission Parts
For CHINAMFG Main Control Valve
For CHINAMFG Joystick and Pedal Valve
For CHINAMFG Center Joint
For CHINAMFG Cylinder
Bonfiglioli winch reducer 716 718 717C3H10A131J9H-145U26
Two light-duty tandem vibratory rollers
Dual Drum Vibratory Roller
Cummins engine
| Type | XD111 | XD121 | XD131 | |
| Working mass(kg) | 11230 | 12300 | 13080 | |
| Mass distributed on front drum(kg) | 5670 | 6210 | 6540 | |
| Mass distributed on rear drum(kg) | 5560 | 6090 | 6540 | |
| Static linear load on front drum(N/cm) | 292 | 286 | 301 | |
| Static linear load on rear drum(N/cm) | 287 | 280 | 301 | |
| Speed range(km/h) | 0-10 | 0-10 | 0-10 | |
| Theoretical gradeability(%) | 30 | 30 | 30 | |
| Min. inner/outer turning radius(mm) | 4000/5900 | 3870/6000 | 3870/6000 | |
| Crab-walking distance (mm) | 200 | 200 | 200 | |
| Min. ground clearance(mm) | 420 | 420 | 420 | |
| Wheel base (mm) | 4000 | 4000 | 4000 | |
| Steering angle(±) | 46 | 46 | 46 | |
| Swinging angle(±) | 12 | 12 | 12 | |
| Vibrating frequency(HZ) | 30-48 | 30-45 | 30-45 | |
| Nominal amplitude(mm) | 0.41/0.8 | 0.41/0.8 | 0.4/0.72 | |
| Centrifugal force(kn) | 66/133 | 70/140 | 82/150 | |
| Model and manufacturer | COMMINS 483.9 | |||
| Rated rotating speed(t/min) | 2200 | 2200 | 2200 | |
| Rated Power(KW)93 | 93 | 93 | 93 | |
| Rated oil wear (g. kw/h)229 | 229 | 229 | 229 | |
| Water tank capacity(L) | 2*450 | 2*450 | 2*450 | |
| Fuel tank capacity(L) | 200 | 220 | 220 | |
Cheapest Price Hydraulic Single Drum Vibratory Compactor Xs142j in Philippines
Xcm Hydraulic Single-Drum Vibratory Rollers Capacity 14 Tons Xs142j in Indonesia
Compacting Price CHINAMFG Single Drum Road Roller Xs142j
Brand New CHINAMFG 14t Single Drum Vibratory Road Roller Xs142j
12 Ton Hydraulic Tandem Vibratory Roller Compactor Xd122
Liugong 12 Ton Double Drum Road Roller Price Clg6212e
Xcm 18 Ton Road Roller Xs182j
Sdlg 14 Ton Vibratory Road Roller Compactor RS8140
2017 New Price CHINAMFG Pneumatic Tire Road Roller Clg630r
14 Tons Double Drum Vibratory Roller Xd142
Hot Sale Road Compactor 10 Ton Tandem Vibratory Roller Xd102
3 Ton CHINAMFG Popular Vibratory Mini Road Roller (Ltc203)
11 Ton Hydraulic Double Drum Road Roller Xd111e
12 Ton Hydraulic Double Drum Road Roller Xd121e
11300kg Double Drum Roller CHINAMFG Xd111e
11 Tons Hydraulic Vibratory Double Drum Compactor Xd111e
Liugong Vibration Road Roller Capacity Clg614
Cheap Price Xihu (West Lake) Dis.n 16ton Road Roller Yz16-7 Sale
Xs202j 20 Ton Single Drum Vibratory Road Roller
11 Ton Vibratory Double Drum Road Roller Xd111e
Product Groups
Wheel Loader
Truck Crane
Excavator
Bulldozer
Motor Grader
Road Roller
Backhoe Loader
Heavy Truck
Crawler Crane
Tower crane
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| Application: | Motor |
|---|---|
| Function: | Distribution Power |
| Layout: | Three-Ring |
| Hardness: | Hardened Tooth Surface |
| Installation: | Torque Arm Type |
| Step: | Three-Step |
| Customization: |
Available
| Customized Request |
|---|
Steps to Replace a Faulty Gearbox in an Automobile
Replacing a faulty gearbox in an automobile is a complex task that requires proper tools, skills, and safety precautions. Here are the general steps involved in the process:
- Prepare the Vehicle: Park the vehicle on a flat surface and engage the parking brake. Disconnect the battery to ensure safety during the procedure.
- Drain Fluids: Drain the transmission fluid from the old gearbox into a suitable container.
- Disconnect Components: Remove any components obstructing access to the gearbox, such as the driveshaft, exhaust system, and linkage.
- Suspend the Engine: If necessary, use an engine hoist or support to suspend the engine safely.
- Support the Gearbox: Use a transmission jack to support the weight of the gearbox.
- Remove Gearbox: Detach the gearbox from the engine by removing bolts and disconnecting the clutch or torque converter.
- Install New Gearbox: Position the new gearbox onto the engine and secure it in place with bolts.
- Reconnect Components: Reattach the driveshaft, exhaust system, and linkage that were disconnected earlier.
- Refill Fluids: Fill the new gearbox with the appropriate transmission fluid according to the manufacturer’s specifications.
- Lower Engine: Carefully lower the engine back into its original position if it was suspended.
- Test and Adjust: Start the vehicle and test the new gearbox for proper operation. Check for any leaks, unusual noises, or gear shifting issues.
- Final Check: Double-check all connections and ensure that all components are properly secured.
- Dispose of Old Fluid: Dispose of the old transmission fluid safely and responsibly.
- Dispose of Old Gearbox: Properly dispose of the old gearbox according to local regulations.
It’s important to note that gearbox replacement can vary significantly depending on the vehicle’s make and model. It’s recommended to consult the vehicle’s service manual or seek professional assistance if you’re not experienced in automotive repair.
editor by CX 2024-04-02
China Custom for CZPT Ec460b Final Drive 14531093 14608847 Travel Reduction Gear Box supplier
Product Description
Bonfiglioli Bonfiglioli speed reducer 715C3B 716C3B 717C3B 718 715C3BS-0571 TRAVEL REDUCTION GEAR BOX
FOR CHINAMFG EC460B FINAL DRIVE 14531093 14608847 TRAVEL REDUCTION GEAR BOX
For CHINAMFG Final Drive
For CHINAMFG Travel Device
For CHINAMFG Traveling Motor
For CHINAMFG Traveling Reduction Gear
For CHINAMFG Swing Device
For CHINAMFG Swing Motor
For CHINAMFG Swing Reduction Gear
For CHINAMFG Main Pump & Pump Parts
For CHINAMFG Axle & Transmission Parts
For CHINAMFG Main Control Valve
For CHINAMFG Joystick and Pedal Valve
For CHINAMFG Center Joint
For CHINAMFG Cylinder
Bonfiglioli winch reducer 716 718 717C3H10A131J9H-145U26
Two light-duty tandem vibratory rollers
Dual Drum Vibratory Roller
Cummins engine
| Type | XD111 | XD121 | XD131 | |
| Working mass(kg) | 11230 | 12300 | 13080 | |
| Mass distributed on front drum(kg) | 5670 | 6210 | 6540 | |
| Mass distributed on rear drum(kg) | 5560 | 6090 | 6540 | |
| Static linear load on front drum(N/cm) | 292 | 286 | 301 | |
| Static linear load on rear drum(N/cm) | 287 | 280 | 301 | |
| Speed range(km/h) | 0-10 | 0-10 | 0-10 | |
| Theoretical gradeability(%) | 30 | 30 | 30 | |
| Min. inner/outer turning radius(mm) | 4000/5900 | 3870/6000 | 3870/6000 | |
| Crab-walking distance (mm) | 200 | 200 | 200 | |
| Min. ground clearance(mm) | 420 | 420 | 420 | |
| Wheel base (mm) | 4000 | 4000 | 4000 | |
| Steering angle(±) | 46 | 46 | 46 | |
| Swinging angle(±) | 12 | 12 | 12 | |
| Vibrating frequency(HZ) | 30-48 | 30-45 | 30-45 | |
| Nominal amplitude(mm) | 0.41/0.8 | 0.41/0.8 | 0.4/0.72 | |
| Centrifugal force(kn) | 66/133 | 70/140 | 82/150 | |
| Model and manufacturer | COMMINS 483.9 | |||
| Rated rotating speed(t/min) | 2200 | 2200 | 2200 | |
| Rated Power(KW)93 | 93 | 93 | 93 | |
| Rated oil wear (g. kw/h)229 | 229 | 229 | 229 | |
| Water tank capacity(L) | 2*450 | 2*450 | 2*450 | |
| Fuel tank capacity(L) | 200 | 220 | 220 | |
Cheapest Price Hydraulic Single Drum Vibratory Compactor Xs142j in Philippines
Xcm Hydraulic Single-Drum Vibratory Rollers Capacity 14 Tons Xs142j in Indonesia
Compacting Price CHINAMFG Single Drum Road Roller Xs142j
Brand New CHINAMFG 14t Single Drum Vibratory Road Roller Xs142j
12 Ton Hydraulic Tandem Vibratory Roller Compactor Xd122
Liugong 12 Ton Double Drum Road Roller Price Clg6212e
Xcm 18 Ton Road Roller Xs182j
Sdlg 14 Ton Vibratory Road Roller Compactor RS8140
2017 New Price CHINAMFG Pneumatic Tire Road Roller Clg630r
14 Tons Double Drum Vibratory Roller Xd142
Hot Sale Road Compactor 10 Ton Tandem Vibratory Roller Xd102
3 Ton CHINAMFG Popular Vibratory Mini Road Roller (Ltc203)
11 Ton Hydraulic Double Drum Road Roller Xd111e
12 Ton Hydraulic Double Drum Road Roller Xd121e
11300kg Double Drum Roller CHINAMFG Xd111e
11 Tons Hydraulic Vibratory Double Drum Compactor Xd111e
Liugong Vibration Road Roller Capacity Clg614
Cheap Price Xihu (West Lake) Dis.n 16ton Road Roller Yz16-7 Sale
Xs202j 20 Ton Single Drum Vibratory Road Roller
11 Ton Vibratory Double Drum Road Roller Xd111e
Product Groups
Wheel Loader
Truck Crane
Excavator
Bulldozer
Motor Grader
Road Roller
Backhoe Loader
Heavy Truck
Crawler Crane
Tower crane
| Application: | Motor |
|---|---|
| Function: | Distribution Power |
| Layout: | Three-Ring |
| Hardness: | Hardened Tooth Surface |
| Installation: | Torque Arm Type |
| Step: | Three-Step |
| Customization: |
Available
| Customized Request |
|---|
Can I Use Synthetic Oil in My Gearbox?
Yes, you can use synthetic oil in your gearbox, and in many cases, it can offer several advantages over conventional mineral-based oils:
- Improved Temperature Stability: Synthetic oils typically have a higher resistance to thermal breakdown, making them suitable for gearboxes that operate at high temperatures.
- Enhanced Lubrication: Synthetic oils often have superior lubrication properties, providing better protection against friction, wear, and component damage.
- Extended Oil Change Intervals: Synthetic oils can often withstand longer operating periods without losing their effectiveness, reducing the frequency of oil changes and maintenance.
- Reduced Viscosity Changes: Synthetic oils are less prone to viscosity changes at different temperatures, ensuring consistent lubrication performance in varying conditions.
- Lower Friction and Energy Loss: The smoother molecular structure of synthetic oils can lead to reduced internal friction, potentially improving gearbox efficiency and performance.
- Cold Weather Performance: Synthetic oils generally flow better at low temperatures, making them suitable for gearboxes operating in cold climates.
- Protection Against Oxidation: Synthetic oils often have better resistance to oxidation, helping to prevent the formation of sludge and deposits that can impact gearbox performance.
However, before switching to synthetic oil, it’s important to consider the manufacturer’s recommendations and specifications for your specific gearbox model. Some gearboxes may have specific requirements or restrictions on the type of lubricant to use. If the manufacturer approves the use of synthetic oil, it can be a beneficial choice, but if not, sticking to the recommended oil type is crucial to ensure proper gearbox function and warranty coverage.
editor by CX 2023-11-18
China Professional Agricultural Farm Machinery Gear Box Reducer Electric Motor Reduction Crops Corn and Rice Harvester Rear Drive Gearbox gearbox definition
Product Description
Agricultural Farm Machinery Gear Box Reducer Electric Motor Reduction Crops Corn and Rice Harvester Rear Drive Gearbox
GEAR MATERIALS
20CrMnTi/20CrMnMo for your choice
CASTINGS MATERIALS
Gray cast iron HT250 according to standard GB/T 1348-2009 Ductile iron QT450-10 according to standard GB/T 1348-2009 Cast steel ZG310-570 according to standard GB/T 5613-2014
SHAFTS MATERIALS
40Cr,45#,20CrMnTi,20CrMnMo for your choice according to your request.
POWER To ensure the correct use of the product we recommand to pay attention to the specifications mentioned on our technical sheet.Consider also the input rotation speed,the power input and the transmission ratios.Where the rotation or other working conditions are different,please contact LongQuan technical department.
LUBRICATION
The reducer is usually supplied without lubricant.The recommended quantity of lubricant is indicated on our catalogue and the first replaced must be done after 50-60 hours of running,then replaced after 600-800 working hours. The emptying of the gearbox should be made immediately after the working,with the oil still hot,in order to avoid the deposition of sludge.Check frequently the oil level and top up the oil whenever necessary.
Related Products
Factory
Extensive use for agricultural machines
Guarantee: High precision, high wear resistance, low noise, smooth and steady, high strength
Our factory
| Type: | Agricultural Gearbox |
|---|---|
| Usage: | Farmland Infrastructure, Agricultural Machine |
| Material: | Carbon Steel |
| Power Source: | Electricity |
| Weight: | OEM |
| After-sales Service: | Installation Guide |
| Samples: |
US$ 999/Piece
1 Piece(Min.Order) | |
|---|
What is a Gearbox and How Does It Work?
A gearbox is a mechanical device that transmits power and changes the speed or torque of a rotating input shaft to a different output shaft. It is commonly used in various machines and equipment to control the speed and direction of motion.
Here’s how a gearbox works:
- Input Shaft: The gearbox receives rotational energy from an input shaft connected to a power source, such as an electric motor or an engine.
- Gears: Inside the gearbox are a set of gears with different sizes. These gears mesh with each other, and their arrangement determines the gear ratio, which defines how many revolutions the output shaft will make for a given rotation of the input shaft.
- Output Shaft: The output shaft is connected to the machinery or equipment that needs to be powered. As the gears rotate, the motion and power are transmitted from the input shaft to the output shaft.
- Gear Ratio: By selecting different gear combinations, the gearbox can change the speed and torque of the output shaft. A higher gear ratio results in higher torque and lower speed, while a lower gear ratio provides higher speed and lower torque.
Gearboxes play a crucial role in various applications, including automobiles, industrial machinery, robotics, and more, enabling efficient power transmission and speed control.
editor by CX 2023-11-18
China Custom De-Clutchable Worm Gear Box Manual Override Worm Gearbox Hdm Series gearbox drive shaft
Product Description
Description
HDM De-clutchable wormgear offers simple and reliable manual positioning of the valves, dampers and other quarter-turn devices when overriding existing pneumatic, electric or hydraulic quarter-turn actuators. All unit are suitable for both indoor and outdoor installation. The modular design is to provide the most efficient and effective solution to a full range of manual overriding requirements.
Main Product features
To engage manual operation, first pull out the lock handle and then rotate the clutch lever in anti-clockwise direction until engagement takes place. To return to automatic mode, first pull out the lock handle and then rotate the clutch lever in clockwise.
Remark:The bottom center of the HDM-4 is either F10/F14 or F10/F12
| New Manual Override | Countershaft | Valve Connection | Actuator Connection | ||||||||||
| b1 | N | b2 | M | D1 | 4-M1 | D2 | 4-M2 | E | D3 | 4-Φ1 | D4 | 4-Φ2 | |
| HDM-1 | 14 | 22 | 14 | 16 | Φ50 | 4-M6 | Φ70 | 4-M8 | 70*70 | Φ50 | 4-Φ6.5 | Φ70 | 4-Φ8.5 |
| HDM-2 | 17 | 22 | 17 | 18 | Φ70 | 4-M8 | Φ102 | 4-M10 | 95*95 | Φ70 | 4-Φ8.5 | Φ102 | 4-Φ10.5 |
| HDM-3 | 22 | 28 | 22 | 22 | Φ102 | 4-M10 | Φ125 | 4-M12 | 114*114 | Φ102 | 4-Φ10.5 | Φ125 | 4-Φ12.5 |
| HDM-4 | 27 | 32 | 27 | 30 | Φ102 | 4-M10 | Φ125 | 4-M12 | 129*129 | Φ125 | 4-Φ12.5 | Φ140 | 4-Φ16.5 |
| HDM-5 | 36 | 45 | 36 | 38 | Φ140 | 4-M16 | / | / | 156*156 | Φ140 | 4-Φ17 | Φ165 | 4-Φ21 |
| HDM-6 | 46 | 50 | 46 | 48 | Φ165 | 4-M20 | / | / | 160*160 | Φ165 | 4-Φ22 | / | / |
| New Manual Override | A | B | ΦC | F | T | Y | H | S | K | Ratio | Rated Input | Rated Onput |
| HDM-1 | 90 | 55 | Φ88 | 115 | 44 | 145 | 120 | 53 | 10 | 26:1 | Nm | 250Nm |
| HDM-2 | 125 | 64 | Φ110 | 135 | 62.5 | 178 | 133 | 56.5 | 13 | 28:1 | Nm | 450Nm |
| HDM-3 | 140 | 71 | Φ129 | 166 | 70 | 212 | 180 | 68.7 | 12.5 | 38:1 | Nm | 700Nm |
| HDM-4 | 188.5 | 93 | Φ174 | 202 | 94 | 280 | 195 | 84 | 15 | 54:1 | Nm | 1200Nm |
| HDM-5 | 222 | 110 | Φ205 | 245 | 110 | 315 | 225 | 92 | 15 | 80:1 | Nm | 2000Nm |
| HDM-6 | 252 | 120 | Φ275 | 280 | 125 | 320 | 252 | 102 | 15 | 78:1 | Nm | 3000Nm |
1. Question:What is your main products?
Answer:Our main products are Pneumatic Actuators, Electric Actuators, Actuated Valves And Valve actuators Accessories..
2. Question:Are you a trader or manufacturer ?
Answer: We are the pneumatic actuators and electric actuators manufacturer , we have ability to do the customization products with experienced team, And we have own factory and production line.
3. Question:How do your make the quality guarantee for actuators?
Answer:We have our own quality control system for incoming and outgoing of the materials, every product will be under controlled and tested before delivery to our customer , and we also provide 18 months guarantee ,beside we provide technical supporting .
4. Question:When can I receive the Price of valve actuators ?
Answer:We will give the Quotation Within 24 hours after we get your inquiry .Or Your can call or message us if it’s quite urgently.
5. Question:How to order our pneumatic actuators and electric actuators ?
Answer:Please send us your inquiry by Email, , etc. we need to know the following informations before giving the formal Quotation.
1) Product information in details, Quantity, Other requirements
2) Delivery time required
6. Question:How can I get a sample to check your quality?
Answer:Contact with our sales expert to arrange the sample delivery. Please send us the details of the sample before placing the order.
7. Question:Shall we pay the sample cost and transportation cost ?
Answer:We will provide the sample by free of charge. Your will bear the freight cost.
8. Question:How long to prepare the sample ?
Answer:Most of our products are under regular production and some of them we keep in stocks.
9. Question:How to delivery the sample to our place?
Answer:Your can provide your forwarders contacts if any, or we will arrange it for you.
10. Question:What about the delivery date if we place the formal order ?
Answer:Usually it takes 15~20days on the production .We know that on-time delivery is very crucial to our customers to meet dead-lines.
We monitor and expedite our supply chain to ensure that we delivery our products to our customers on-time all the time.
| Installation: | Manual |
|---|---|
| Type: | Worm Gear Box |
| Worm Material: | Qt400 |
| Shaft Material: | 45#Steel |
| Transport Package: | Foam and Carton Box |
| Trademark: | Hearken |
| Samples: |
US$ 50/Piece
1 Piece(Min.Order) | |
|---|
| Customization: |
Available
| Customized Request |
|---|
What is a Gearbox and How Does It Work?
A gearbox is a mechanical device that transmits power and changes the speed or torque of a rotating input shaft to a different output shaft. It is commonly used in various machines and equipment to control the speed and direction of motion.
Here’s how a gearbox works:
- Input Shaft: The gearbox receives rotational energy from an input shaft connected to a power source, such as an electric motor or an engine.
- Gears: Inside the gearbox are a set of gears with different sizes. These gears mesh with each other, and their arrangement determines the gear ratio, which defines how many revolutions the output shaft will make for a given rotation of the input shaft.
- Output Shaft: The output shaft is connected to the machinery or equipment that needs to be powered. As the gears rotate, the motion and power are transmitted from the input shaft to the output shaft.
- Gear Ratio: By selecting different gear combinations, the gearbox can change the speed and torque of the output shaft. A higher gear ratio results in higher torque and lower speed, while a lower gear ratio provides higher speed and lower torque.
Gearboxes play a crucial role in various applications, including automobiles, industrial machinery, robotics, and more, enabling efficient power transmission and speed control.
editor by CX 2023-10-18
China manufacturer Helical Motor Gear Winch Drive Reducer Agricultural Transmission Variable Industrial Custom Assembly Stainless Steel Worm Speed Reduction Gearbox gearbox drive shaft
Product Description
Helical Motor gear winch drive reducer Agricultural Transmission Variable Industrial Custom assembly stainless steel worm speed reduction Gearbox
Application of worm speed reduction Gearbox
Worm speed reduction gearboxes are used in a wide variety of applications where high torque and low speed are required. Some common applications include:
- Elevators: Worm speed reduction gearboxes are used in elevators to control the speed of the elevator car.
- Wind turbines: Worm speed reduction gearboxes are used in wind turbines to convert the rotational energy of the turbine blades into electrical energy.
- Conveyor belts: Worm speed reduction gearboxes are used in conveyor belts to move materials along the belt.
- Mixers: Worm speed reduction gearboxes are used in mixers to mix ingredients together.
- Machine tools: Worm speed reduction gearboxes are used in machine tools to control the speed of the cutting tools.
Worm speed reduction gearboxes offer a number of advantages over other types of gearboxes, including:
- High torque: Worm speed reduction gearboxes can transmit high torques, making them ideal for applications where high forces are required.
- Low speed: Worm speed reduction gearboxes can operate at low speeds, making them ideal for applications where noise and vibration are a concern.
- Compact size: Worm speed reduction gearboxes are typically smaller and lighter than other types of gearboxes, making them ideal for applications where space is limited.
However, worm speed reduction gearboxes also have some disadvantages, including:
- Low efficiency: Worm speed reduction gearboxes are not as efficient as other types of gearboxes, meaning that they lose some of the power that is transmitted through them.
- High noise levels: Worm speed reduction gearboxes can be noisy, especially when operating at high speeds.
- High maintenance requirements: Worm speed reduction gearboxes require more maintenance than other types of gearboxes. This is because the worm gear is a complex design that is prone to wear and tear. The worm gear should be inspected and lubricated regularly to prevent premature wear and tear.
Overall, worm speed reduction gearboxes are a versatile and reliable type of gearbox that can be used in a wide variety of applications. They offer a number of advantages, including high torque, low speed, and compact size. However, they also have some disadvantages, including low efficiency, high noise levels, and high maintenance requirements.
Here are some additional details about the advantages and disadvantages of worm speed reduction gearboxes:
Advantages:
- High torque: Worm speed reduction gearboxes can transmit high torques, making them ideal for applications where high forces are required. This is because the worm gear has a number of teeth that mesh with the worm wheel, which creates a high frictional force.
- Low speed: Worm speed reduction gearboxes can operate at low speeds, making them ideal for applications where noise and vibration are a concern. This is because the worm gear has a slow rotational speed, which reduces the amount of noise and vibration that is generated.
- Compact size: Worm speed reduction gearboxes are typically smaller and lighter than other types of gearboxes, making them ideal for applications where space is limited. This is because the worm gear is a compact design, which reduces the overall size of the gearbox.
Disadvantages:
- Low efficiency: Worm speed reduction gearboxes are not as efficient as other types of gearboxes, meaning that they lose some of the power that is transmitted through them. This is because the worm gear has a high frictional coefficient, which results in some of the power being lost as heat.
- High noise levels: Worm speed reduction gearboxes can be noisy, especially when operating at high speeds. This is because the worm gear has a high frictional coefficient, which results in some of the power being lost as heat. This heat can cause the gearbox to expand, which can lead to noise and vibration.
- High maintenance requirements: Worm speed reduction gearboxes require more maintenance than other types of gearboxes. This is because the worm gear is a complex design that is prone to wear and tear. The worm gear should be inspected and lubricated regularly to prevent premature wear and tear.
| Application: | Motor, Electric Cars, Motorcycle, Machinery, Marine, Agricultural Machinery, Car |
|---|---|
| Function: | Distribution Power, Clutch, Change Drive Torque, Change Drive Direction, Speed Changing, Speed Reduction, Speed Increase |
| Layout: | Coaxial |
| Hardness: | Hardened Tooth Surface |
| Installation: | Horizontal Type |
| Step: | Three-Step |
| Samples: |
US$ 9999/Piece
1 Piece(Min.Order) | |
|---|
Different Types of Gearboxes and Their Applications
There are several types of gearboxes, each designed for specific applications based on their characteristics and capabilities. Here are some common types and their applications:
- Spur Gearbox: Spur gearboxes consist of parallel-shaft gears with straight teeth. They are simple and economical, suitable for low-speed and low-torque applications such as conveyors, machine tools, and clocks.
- Helical Gearbox: Helical gearboxes have helical teeth that provide smoother and quieter operation compared to spur gears. They are used in various industries, including automotive, construction, and mining equipment.
- Bevel Gearbox: Bevel gearboxes transmit power between non-parallel shafts. They are commonly used in vehicles, marine applications, and heavy machinery where changing the direction of motion is necessary.
- Planetary Gearbox: Planetary gearboxes offer high torque density and compact size. They are used in robotics, automation, and precision machinery due to their efficiency and versatility.
- Worm Gearbox: Worm gearboxes have a worm screw meshing with a gear wheel. They provide high reduction ratios and are used in applications like conveyor systems, elevators, and packaging equipment.
- Cycloidal Gearbox: Cycloidal gearboxes use cams and pins for motion transmission, making them highly durable and shock-resistant. They find use in industrial machinery and robotics.
- Spiral Bevel Gearbox: Spiral bevel gearboxes combine the advantages of bevel and helical gears, providing high efficiency and smooth operation. They are employed in vehicles, aircraft, and machine tools.
Each type of gearbox offers specific advantages suited to its application, enabling efficient power transmission and control in various industries.
editor by CX 2023-10-12
China best Swing Planetary Drive Hydraulic Slewing Drive Gear Box with Hot selling
Product Description
swing planetary drive hydraulic slewing drive gear box
Product description:
Daixin planetary reducer gearbox is designed with large torque, high start and transmission efficiency, low-speed stability, compact radial size, low noise, etc.
The main devices we are making are walking reducers, lifting reducers and swing reducers.
They are widely used for vehicle cranes, crawler cranes, truck mounted cranes, marine cranes, aerial work trucks, excavators, etc.
| Product | Slewing drive reducer |
| Model | DH6B63E |
| Max. output torque | 5834 Nm |
| Ratio | 63.1:1 |
| Max. input torque | 92.5 Nm |
| Max. input speed | 1188 rpm |
| Max. output speed | 18.8 rpm |
| Application | slewing drive for truck crane, wrecker, aerial working platform, etc |
| OEM | Acceptable |
Product features:
1.Compact size
2.Low noise
3.High start-up and working efficiency
4.Easy installation, operation and maintenance
5.Various models for wide applications
6.One year warranty
7.Free components for replacement within warranty period
8.Professional and tailored solution for different requirements
9.Free technical support at any time
10.Customer training is available.
Packing and delivery details:
Packing method: plywood box (1 pc / box)
Company details:
ZheJiang CHINAMFG Intelligent Technology Co., Ltd is a scientific and technological enterprise engaged in the research, development and production of planetary gear transmission products, like slewing reducers, Travel drive reducers, lifting winch reducers, hydraulic winches, etc.
The company has always put quality management as the top priority of the company’s development. The products are manufactured not only meet the international ISO 4301 and ISO9001 standards, but also meet the US SAE J706 and the European Union CE standards.
Daixin Intelligent Technology relies on quality, reputation and service to develop, cultivate and consolidate the national and global markets. Be our partners and be our friends.
Our clients:
The company relies on quality, reputation and service to develop, cultivate and consolidate the national and global markets.
Currently, the cooperative customers include: the famous construction machinery manufacturers Zoomlion, the largest wrecker manufacturer ZheJiang CHINAMFG Company, and the largest high-altitude vehicle manufacturer HangZhou Handler Company.
Products are also exported to Russia, Belarus, Spain, UK, Canada, Australia, India, Malaysia and other countries.
FAQ:
1.How to choose the product which meets our requirement?
A) Look through our shop, find a proper item, send me an inquiry, I quote details for you.
B) In case no suitable item in our shop, send me an inquiry with your requirements, we can customize for you.
2.What is payment term?
A) For regular design: 30% deposit, the balance before loading.
B) For customized design: 50% deposit, the balance before loading.
Payment term is negotiable according to order.
3.What is delivery time?
A) For common models in stock, delivery time are 5-7 days.
B) For customized models and new production, delivery time are 30-40 days.
5.How about after-sale service?
A) Within warranty, all spare parts are delivered for free.
B) Exceed warranty, all spare parts are offered with the lowest production cost.
Warranty period is 1 year, but our servicing is for the whole lifetime of product, so no worry for reselling and personal resell.
Thank you for the time. For any question or requirements, please contact me 🙂
| Application: | Machinery, Agricultural Machinery, Wrecker, Truck Crane |
|---|---|
| Hardness: | Hardened Tooth Surface |
| Installation: | Horizontal Type |
| Layout: | Coaxial |
| Gear Shape: | Cylindrical Gear |
| Step: | Double-Step |
| Customization: |
Available
| Customized Request |
|---|
How to Calculate Gear Ratio in a Gearbox
Gear ratio is a fundamental parameter in a gearbox that represents the ratio of the number of teeth between two gears. It determines how much the output gear rotates in relation to the input gear. The formula to calculate gear ratio is:
Gear Ratio (GR) = Number of Teeth on Output Gear / Number of Teeth on Input Gear
Here’s a step-by-step guide on how to calculate gear ratio:
- Identify the input and output gears in the gearbox.
- Count the number of teeth on the output gear (the gear connected to the output shaft).
- Count the number of teeth on the input gear (the gear connected to the input shaft).
- Plug the values into the gear ratio formula: GR = Number of Teeth on Output Gear / Number of Teeth on Input Gear.
- Calculate the gear ratio by performing the division.
The gear ratio provides insight into how much the input gear needs to rotate to achieve a certain rotation of the output gear. It influences torque, speed, and direction of rotation in the gearbox.
editor by CX 2023-10-08
China factory Glider Cabinet Drive System 24V DC Micro Worm Gear Motor 120rpm 1nm Worm Gear Motor Actuator for Cabinets, Display Cabinets gearbox and motor
Product Description
Glider Cabinet Drive System
above specifications just for reference and customizable according to requirements.
product details show:
To solve this problem, we try to add an intelligent self-locking function to the circuit breaker controller of the electronic meter. Taking into account that the internal space of the smart controller of the electric meter is relatively small, the gear motor should drive the stable operation of the loop control system in a limited space, and it is only allowed to rotate in the specified direction and cannot go backwards. We use 10mm planetary gearheads and turbine inserts to be injected into the loop controller gearbox, so that the transmission structure has the characteristics of small size, large torque and can meet the needs of self-locking function. The loop controller gearbox in this scheme can realize the reverse self-locking of the electric meter, which can only transmit the power of the active end of the motor without responding to the external load, thereby isolating the external load from the smart meter’s own mechanism. In case of possible damage, the smart meter can be stopped at the gear motor (also called the gear motor of the loop controller) to increase the service life of the smart meter, solve the problem of data loss when the power is suddenly cut off, and protect the safety of the data.
Application
| Smart wearable devices | watch,VR,AR,XR and etc. |
| Household application | kitchen appliances, sewing machines, corn popper, vacuum cleaner, garden tool, sanitary ware, window curtain, intelligent closestool, sweeping robot, power seat, standing desk, electric sofa, TV, computer, treadmill, spyhole, cooker hood, electric drawer, electric mosquito net, intelligent cupboard, intelligent wardrobe, automatic soap dispenser, UV baby bottle sterilizer, lifting hot pot cookware, dishwasher, washing machine, food breaking machine, dryer, air conditioning, dustbin, coffee machine, whisk,smart lock,bread maker,Window cleaning robot and etc. |
| communication equipment | 5G base station,video conference,mobile phone and etc. |
| Office automation equipments | scanners, printers, multifunction machines copy machines, fax (FAX paper cutter), computer peripheral, bank machine, screen, lifting socket, display,notebook PC and etc. |
| Automotive products | conditioning damper actuator, car DVD,door lock actuator, retractable rearview mirror, meters, optic axis control device, head light beam level adjuster, car water pump, car antenna, lumbar support, EPB, car tail gate electric putter, HUD, head-up display, vehicle sunroof, EPS, AGS, car window, head restraint, E-booster, car seat, vehicle charging station and etc. |
| Toys and models | radio control model, automatic cruise control, ride-on toy, educational robot, programming robot, medical robot, automatic feeder, intelligent building blocks, escort robot and etc. |
| Medical equipments | blood pressure meter, breath machine, medical cleaning pump, medical bed, blood pressure monitors, medical ventilator, surgical staplers, infusion pump, dental instrument, self-clotting cutter, wound cleaning pump for orthopedic surgery,electronic cigarette, eyebrow pencil,fascia gun, , surgical robot,laboratory automation and etc. |
| Industrials | flow control valves, seismic testing,automatic reclosing,Agricultural unmanned aerial vehicle,automatic feeder ,intelligent express cabinet and etc. |
| Electric power tools | electric drill, screwdriver,garden tool and etc. |
| Precision instruments | optics instruments,automatic vending machine, wire-stripping machine and etc. |
| Personal care | tooth brush, hair clipper, electric shaver, massager, vibrator, hair dryer, rubdown machine, scissor hair machine, foot grinder,anti-myopia pen, facial beauty equipment, hair curler,Electric threading knife,POWER PERFECT PORE, Puff machine,eyebrow tweezers and etc. |
| Consumer electronics | camera, mobile phone,digital camera, automatic retracting device,camcorder, kinescope DVD,headphone stereo, cassette tape recorder, bluetooth earbud charging case, turntable, tablet,UAV(unmanned aerial vehicle),surveillance camera,PTZ camera, rotating smart speaker and etc. |
| robots | educational robot, programming robot, medical robot, escort robot and etc. |
Our Services:
- ODM & OEM
- Gearbox design and development
- Related technology support
Packaging & Shipping
1) Packing Details
packed in nylon firstly, then carton, and then reinforced with wooden case for outer packing.
Or according to client’s requirement.
2) Shipping Details
samples will be shipped within 10 days;
batch order leading time according to the actual situation.
Company Information:
HangZhou CHINAMFG Machinery & Electronics Co., Ltd was established in 2001,We provide the total drive solution for customers from design, tooling fabrication, components manufacturing and assembly.
1) Competitive Advantages
- 1) Competitive Advantages
17+year experience in manufacturing motor gearbox
We provide technical support from r&d, prototype, testing, assembly and serial production , ODM &OEM
Competitive Price
Product Performance: Low noise, High efficiency, Long lifespan
Prompt Delivery: 15 working days after payment
Small Orders Accepted
2) Main Products
-
Precision reduction gearbox and its diameter:3.4mm-38mm,voltage:1.5-24V,power: 0.01-40W,output speed:5-2000rpm and output torque:1.0 gf.cm -50kgf.cm,
- Customized worm and gear transmission machinery;
- Precise electromechanical motion module;
- Precise component and assembly of plastic and metal powder injection.
Certifications
We Have passed to hold ISO9001:2015(CN11/3571),ISO14001:2004(U006616E0153R3M), ISO13485:2016(CN18/42018) and IATF16949:2016(CN11/3571.01).
and more…
FAQ
1. Can you make the gearbox with custom specifications?
YES. We have design and development team, also a great term of engineers, each of them have
many work years experience.
2.Do you provide the samples?
YES. Our company can provide the samples to you, and the delivery time is about 5-15days according to the specification of gearbox you need.
3.What is your MOQ?
Our MOQ is 2000pcs. But at the beginning of our business, we accept small order.
4. Do you have the item in stock?
I am sorry we donot have the item in stock, All products are made with orders.
5. Do you provide technology support?
YES. Our company have design and development team, we can provide technology support if you
need.
6.How to ship to us?
We will ship the goods to you according to the DHL or UPS or FEDEX etc account you provide.
7.How to pay the money?
We accept T/T in advance. Also we have different bank account for receiving money, like US dollors or RMB etc.
8. How can I know the product is suitable for me?
Frist, you need to provide us the more details information about the product. We will recommend the item to you according to your requirement of specification. After you confirm, we will prepare the samples to you. also we will offer some good advances according to your product use.
9. Can I come to your company to visit?
YES, you can come to our company to visit at anytime, and welcome to visit our company.
10. How do contact us ?
Please send an inquiry
| Application: | Universal, Industrial, Household Appliances, Car, Power Tools |
|---|---|
| Operating Speed: | Constant Speed |
| Excitation Mode: | Compound |
| Function: | Control, Driving |
| Casing Protection: | Open Type |
| Number of Poles: | 12 |
| Customization: |
Available
| Customized Request |
|---|
Benefits of Regular Gearbox Maintenance
Regular maintenance of gearboxes offers numerous advantages:
- Extended Lifespan: Proper maintenance helps prevent premature wear and breakdown, increasing the gearbox’s overall lifespan.
- Reduced Downtime: Regular inspections and maintenance can identify issues early, minimizing unplanned downtime for repairs.
- Improved Efficiency: Well-maintained gearboxes operate more efficiently, leading to energy savings and optimized performance.
- Cost Savings: Routine maintenance reduces the need for costly major repairs or replacements.
- Enhanced Safety: Regular maintenance ensures safe operation by addressing potential hazards and malfunctions.
- Optimal Performance: Properly maintained gearboxes deliver consistent and reliable performance for machinery and equipment.
- Preserved Functionality: Maintenance prevents issues that could lead to reduced functionality or complete failure.
- Reduced Environmental Impact: Well-maintained gearboxes consume less energy and minimize waste, contributing to sustainability efforts.
- Compliance: Regular maintenance helps meet industry regulations and standards for equipment safety and performance.
Implementing a proactive maintenance plan can provide these benefits and contribute to the overall success of your machinery and operations.
editor by CX 2023-09-28
China high quality Agriculture Machinery Gear Box Agri Farm Tractor Rotary Mowers Bevel Digger Fertilizer Spreader Right Angle Drive Shaft Bevel Pto Agriculture Gearboxes best automatic gearbox
Product Description
Agriculture Machinery Gear Box Agri Farm Tractor Rotary Mowers Bevel Digger Fertilizer Spreader Right Angle Drive Shaft Bevel Pto Agriculture Gearboxes.
This Miter Bevel Gearbox is also known as spiral bevel gearbox, spiral bevel gear drives, spiral bevel gear reducers, right angle miter gearbox, or 90 degree bevel gearbox. The spiral bevel gear delivers high transmission capacity and high efficiency. The Spiral Bevel Gearboxes are specifically engineered for use with machine screw jacks and actuators in multiple jack systems. You have several linear drives that you would like to connect together – i.e. to synchronize. For economic reasons, you don’t want to drive every single linear drive separately with its own electric motor. This is where our bevel gearboxes come into their own.
Right Angle Spiral Bevel Gearbox Applications: 90-degree reducers are used throughout dozens of industries to alter torque and speed in drive components. Any use that demands the reliable transfer of speed or power. There are countless applications for 3-way transmission gearboxes, some of which include: Industrial Dryers, Folding Machines, Brushing Machinery, Power Transmission Equipment, Pumps, Damper Controls, Case Openers, Paper Rewinders, Test Equipment. Our Right Angle Bevel Gearbox lineup includes shaft to shaft, shaft to bore, bore to bore, 2 shaft, 3 shaft, high ratio, and low profile models. All our Bevel T right angle gearboxes are built with a single output shaft extended out both sides of the box, so both ends rotate simultaneously in the same direction.
Compact Cubic Style Spiral Bevel Gearbox with CHINAMFG Shafts
The spiral bevel gearbox offers a robust, powerful and compact design, for right angle power transmission. The practical cubic shape of bevel gearboxes allow universal mounting possibilities on every kind of machines. They are proven in the market for their versatility, very low backlash and low transmission error. The design comprises of ball bearings for quiet operation and tapered bearings for higher radial load capacity. Application in Pulp and paper industry, food processing, off-shore industry, mining and mineral industry, paper machine drives, pulper drives, blowers, pumps, vacuum pump drives and flooding pump stations.
JTP Series: Solid shaft input, CHINAMFG shaft output.
JTPH Series: CHINAMFG shaft input, Hollow shaft output.
JTPF Series: Input Flange(IEC, NEMA), CHINAMFG shaft output.
JTPG Series: Input Flange(IEC, NEMA), Hollow shaft output.
Features:
* Ultra Compact Design. All-round machined symmetrical housing, and all-round tapped holes for universal mounting, 6 possible mounting positions.
* Gears ratios of 1:1, 1.5:1, 2:1, 3:1, 4:1 and 5:1 are actual ones.
* Power range from 0.1kw to 156kw, Torque range from 11.5Nm to 1199Nm.
* Gear transmission average efficiency up to 94%.
* 2-way, 3-way and 4-way Configurations. Allows both horizontal and vertical shafts.
* CHINAMFG Shaft, Hollow Shaft, and Direct motor mount or via motor flanges.
* Various Shafts Arrangements, Rotation Directions and Mounting Positions available.
* High efficiency, high transmission capacity, low backlash, noiseless operation, low running temperature and long service life.
Structures and Materials:
* Spiral bevel gears: High purity rugged alloy steel 20CrMnTiH, carburizing and quenching, case hardened and lapped in pairs for intersecting shafts, low noise with grinded spiral teeth, high torque with milled teeth, high rigidity and wear resistance.
* Housings(Gearboxes): High rigidity cast iron housings designed for superior thermal conductivity provides rigid gear and bearing support. Custom corrosion resistant stainless steel housings for All sizes. Custom corrosion resistant lightweight aluminum alloy housings for sizes 65 to 140.
* Input and output shafts: Hardened and tempered alloy steel 40Cr material, hanging heavy load capacity With key and key way. Custom corrosion resistant stainless steel shafts, or other corrosion resistance painting shafts, spline shaft, shaft without key and key way.
* Bearings: Heavy duty tapered roller bearing. Custom reinforced bearings for higher radial and axial load. Custom corrosion resistant stainless steel bearings.
T Series Right Angle Spiral Bevel Gearbox
JT Series Spiral Bevel Gearboxes with the use of high-precision spiral bevel gears, delivers high transmission efficiency and high transfer capacity, high performance, low backlash, smooth rotation, silent drive possible, low running temperature, long life and easy installation. General applications in worm gear screw jack systems, industrial dryers, folding machines, brushing machinery, power transmission equipment, pumps, damper controls, case openers, paper rewinders, test equipment, blowers and fans, unloaders and unscramblers, bottle capping, electroplating machinery, folding machines, food processing equipment, transfer machines, chemical mixers and recording equipment.
Features:
* Used in pairs case hardened alloy steel spiral bevel gears to transmit rotary motion, mechanical power and torque.
* Gears ratios of 1:1, 1.5:1, 2:1, 2.5:1, 3:1, 4:1 and 5:1 are actual ones.
* Power range from 1.79kw to 335kw, Torque range from 28Nm to 5713Nm.
* Gear transmission average efficiency up to 94%.
* 2-way, 3-way and 4-way Configurations. Allows both horizontal and vertical shafts.
* CHINAMFG Shaft, Hollow Shaft, and Direct motor mount or via motor flanges.
* Various Shafts Arrangements, Rotation Directions and Mounting Positions available.
* High efficiency, high transmission capacity, low backlash, noiseless operation, low running temperature and long service life.
Structures and Materials:
* Spiral bevel gears: High purity rugged alloy steel 20CrMnTiH, carburizing and quenching, case hardened and lapped in pairs for intersecting shafts, low noise with grinded spiral teeth, high torque with milled teeth, high rigidity and wear resistance.
* Housings(Gearboxes): High rigidity cast iron housings designed for superior thermal conductivity provides rigid gear and bearing support.
* Input and output shafts: Hardened and tempered alloy steel 40Cr material, hanging heavy load capacity With key and key way. Custom corrosion resistant stainless steel shafts, or other corrosion resistance painting shafts, spline shaft, shaft without key and key way.
* Bearings: Heavy duty tapered roller bearing. Custom reinforced bearings for higher radial and axial load. Custom corrosion resistant stainless steel bearings.
* Oil Seals: Double lip oil seal, prevent gear oil leak and dust-proof.
Space-saving Aluminium Gearboxes – Lightweight, Super Small
JTA Series Aluminum Alloy Bevel Gearbox is a small-sized, ultra-lightweight type of our miter gear box. These units are lubricated for life to assure trouble free service. High-performance spiral bevel gear is used to enable silent and high transmission operations. Universal mounting type that can be mounted in any direction. 1:1 and 2:1 ratios, with 2 or 3 shafts orientations. 4 sizes are available to suit your needs in a compact, maintenance free, ready to use package.
Features:
* Compact design, Small sizes, Ultra light weight.
* Gears ratios of 1:1, 2:1 are actual ones.
* Power range from 0.02kw to 4.94kw, Torque range from 2Nm to 40Nm.
* Gear transmission average efficiency up to 94%.
* 2-shafts and 3-shafts Configurations. Allows both horizontal and vertical shafts.
* High efficiency, low backlash, noiseless operation, low running temperature and long service life.
Structures and Materials:
* Spiral bevel gears: High purity rugged alloy steel 20CrMnTiH, carburizing and quenching, case hardened and lapped in pairs for intersecting shafts, low noise with grinded spiral teeth, high torque with milled teeth, high rigidity and wear resistance.
* Housings(Gearboxes): Aluminum alloy.
* Input and output shafts: Hardened and tempered alloy steel material, hanging heavy load capacity With key and key way. Custom corrosion resistant stainless steel shafts, or other corrosion resistance painting shafts, spline shaft, shaft without key and key way.
* Bearings: Heavy duty tapered roller bearing. Custom reinforced bearings for higher radial and axial load. Custom corrosion resistant stainless steel bearings.
Spiral-bevel gear drives, like all bevel gear drives, are designed for high capacity, efficiency, quiet operation, and long service life. These spiral-bevel gear drives are designed for operation that’s as reliable as it is quiet. Their shafts are heat treated and alloy-steel mounted on heavy-duty, tapered roller bearings for smoother operation. Their housings are made of precision-machined cast iron to ensure accurate, permanent alignment of the gears for superior performance. Double-bearing input support extends horsepower capacity and increases durability.
Right 90 spiral-bevel gear drives are designed for high efficiency, quiet operation, and long service life. Housings are made of lightweight aluminum alloy. Performance that’s reliable, efficient, and as noise-free as possible Input and output shaft flanges simplify mounting and installation Can be used to either reduce or increase speed Single and double-projecting output shafts for application flexibility Ground alloy steel shafts are mounted on precision ball bearings for smooth operation Pre-lubrication designed to last for the life of the drive improves performance and reduces maintenance.
Bevel gear drives feature compact, rugged construction and precision-forged, spiral-tooth bevel gears, making them ideal for industrial applications where low-speed/ high-torque drives are required. Spiral-tooth bevel gears have teeth that are made from precision-forged alloy steel for maximum strength, as well as case hardened for increased durability. Input and output shafts are constructed from ground and polished heat-treated alloy steel to further enhance the overall toughness of these drives. Precision-machined, one-piece, quality cast-iron housings mean less maintenance and greater reliability. Double-lip, garter-spring-type oil seals are use to retain lubricants and block foreign-matter contamination for extended life. All drives are furnished with keys for projecting shafts to assure quick installation.
Shipment and Packing Pictures
Shipping:
1. CHINAMFG freight: seaport to seaport, price terms CIF, FOB, EXW, CFR etc.
2. Air freight: airport to airport, price terms EXW, CRF etc.
3. Air courier: DHL, FEDEX, UPS, TNT door to door shipment, price terms DDU, CPT etc.
Packing:
16567X3, registered Capital 500000CNY) is a leading manufacturer and supplier of Screw Jacks (Mechanical Actuators), Bevel Gearboxes, Lifting Systems, Electric Linear Actuators, Gearmotors and Speed Reducers, Others Linear Motion and Power Transmission Products in China. We are located in Chang An, Xihu (West Lake) Dis. guan, Guang dong in China. We are an audited professional manufacturer and supplier by SGS (Serial NO.: QIP-ASI192186) and BV (Serial NO.: MIC-ASR257162) organizations. We have a strict quality system, with senior engineers, experienced skilled workers and practiced sales teams, and consistently provide the customers with the best engineered solution for precision linear actuation, power transmission and mechanical jacking systems. CHINAMFG Industries guarantees quality, reliability, performance and value for today’s demanding industrial applications.
Company Advantages
* One of the biggest orders with 1750 units screw lift jacks.
* Standard products with 2D Drawings(DXF, DWG, PDF) and 3D CAD Model(STEP).
* 100% quality assured with double quality inspections. Original Inspection Reports, Operation Manual, and Book Catalogue are put into the packages.
* 100% safety transportation with strong standard export plywood cases materials (free fumigation).
* International standard materials for all standard products.
* Custom design available, OEM service available, Free engineering advice and Customer label available.
Products List
* Manual Screw Jacks
* Electric Screw Jacks
* Screw Jacks Series:
Cubic Screw Jack JTC Series, Machine Screw Jack JTW Series, Trapezoidal Screw Jack JT Series, Worm Screw Jack JTM Series, Stainless Steel Screw Jack JSS Series, Through Hole Screw Jack JTH Series, Ball Screw Jack JTB Series, Cubic Ball Screw Jack JTD Series, Bevel Gear Screw Jack JTS Series and JTG Series, and Electric Cylinder JTE Series.
* Bevel Gearboxes Series:
Cubic Bevel Gearbox JTP Series, Hollow Shaft Gearbox JTPH Series, Input Flange Gearbox JTPF Series, Input Flange and Hollow shaft Gearbox JTPG Series, Stainless Steel Gearbox JTP Series, Aluminum Gearbox JTA Series, and Bevel Gearboxes JT Series.
* Screw Jack Lifting Systems and Accessories:
2jacks lifting system, 3jacks lifting system, 4jacks lifting system, 6jacks lifting system, 8jacks lifting system……14jacks lifting system. Lifting systems accessories cover ac, dc motors, geared motors, servo motors, stepper motors, handwheels, couplings, universal joints, telescopic universal joints, connecting shafts, cardan shafts, limit switches, proximity switches, safety nut, travel nut, rod ends, stop nuts, pillow block bearings, flange blocks, motor flange nema or iec, encoder, potentiometer, frequency converter, position indicators, trunnion plate, and trunnion mounting brackets.
* Electric Linear Actuators Series:
Electro Mechanical Actuators LA Series, Electro Mechanical Actuators LAP Series.
* Gear Reducers Series:
Helical Gear Reducers R Series, Helical Bevel Gear Reducers K Series, Parallel Shaft Helical Gear Reducers F Series, Helical Worm Gear Reducers S Series, Helical Gear Motor GMH/GMV Series, and Worm Gear Reducers NMRV Series.
Customers Distribution Countries
* American Countries: United States, Mexico, Canada, Chile, Argentina, Xihu (West Lake) Dis.via, Brazil, Colombia, Guatemala, Honduras, Panama, Peru.
* European Countries: Germany, France, United Kingdom, Italy, Spain, Poland, Romania, Netherlands, Belgium, Greece, Czech Republic, Portugal, Sweden, Hungary, Austria, Switzerland, Bulgaria, Denmark, Finland, Slovakia, Norway, Ireland, Georgia, Slovenia.
* Asian Countries: Malaysia, Indonesia, Singapore, Philippines, Vietnam, Thailand, India, Israel, Cambodia, Myanmar, Sri Lanka, Maldives, Pakistan, Iran, Turkey, Jordan, Saudi Arabia, Yemen, Oman, United Arab Emirates, Qatar, Georgia, Armenia.
* Oceanian Countries: Australia, New Zealand.
* African Countries: Egypt, Ethiopia, Nigeria, South Africa, Zambia, Mozambique.
| Application: | Motor, Electric Cars, Motorcycle, Machinery, Marine, Agricultural Machinery, Bottle Capping, Food Processing Equipment |
|---|---|
| Function: | Distribution Power, Change Drive Torque, Change Drive Direction, Speed Changing, Speed Reduction, Speed Increase |
| Layout: | Right Angle Drive |
| Hardness: | Hardened Tooth Surface |
| Installation: | Horizontal Type and Vertical Type |
| Step: | Single-Step |
| Customization: |
Available
| Customized Request |
|---|
What is a Gearbox and How Does It Work?
A gearbox is a mechanical device that transmits power and changes the speed or torque of a rotating input shaft to a different output shaft. It is commonly used in various machines and equipment to control the speed and direction of motion.
Here’s how a gearbox works:
- Input Shaft: The gearbox receives rotational energy from an input shaft connected to a power source, such as an electric motor or an engine.
- Gears: Inside the gearbox are a set of gears with different sizes. These gears mesh with each other, and their arrangement determines the gear ratio, which defines how many revolutions the output shaft will make for a given rotation of the input shaft.
- Output Shaft: The output shaft is connected to the machinery or equipment that needs to be powered. As the gears rotate, the motion and power are transmitted from the input shaft to the output shaft.
- Gear Ratio: By selecting different gear combinations, the gearbox can change the speed and torque of the output shaft. A higher gear ratio results in higher torque and lower speed, while a lower gear ratio provides higher speed and lower torque.
Gearboxes play a crucial role in various applications, including automobiles, industrial machinery, robotics, and more, enabling efficient power transmission and speed control.
editor by CX 2023-09-25
China best Motorcycle Spare Parts Speed Counter Speedometer Drive Gear Box CS125/Xs125 with high quality
Product Description
| Product name | Speedometer drive gear box | Model | CS125/XS125 |
| Quality | Guarantee | Price | Competitive |
| OEM | Welcomed | Market | Global |
We mainly supply all kinds of motorcycles and motorcycle parts, motorcycle accessories, motorcycle engine parts, like brake
disc,Brake shoe, carburetor, chain, exhaust muffler, fuel tank, grip, handlebar, lamp, shock absorber, sprocket, and so on. 10
share-holding factories and dozens of associated manufacturers which ensure our quality products and competitive price. We
got a team specialize in international business to provide its considerate service for our clients enthusiastically.
Suits For South American Market Model:
BAJAJ 180 ,205, BOXER 100, DISCOVERY 125, PULSAR 200
HONDA CARGO 125, CARGO 150, CGL125 TOOL, INVICTA 125, INVICTA 150, CZPT 150, CBR 600, C90, CD100, XL125, GL150,
ITALIKA AT110, AT110 RT, AT110 SPORT, DS125, DS150, FT110, FT125, FT150, FT150 GT, GS150, GS175, STRADA 70, VENDETA 90, 150Z,
DM150, VITALIA125,
SUZUKI AX100, AX115, GN125, GS125, GSXR600,
YAMAHA BWS100, CRYPTON 110, R1, R6,FZ16, RX100, RXZ100, RXS115, YB125, YBR125, YBR125 EXPRESS, BWS125,DT125,
TVS KING, CARDAN, BROSS 125/150 CG200, CG125, CBX200, JH70, XLR125, C-100BIZ, TITAN2000, TITAN99, C70ZC, RX115LIBERO,
GY6-125/150
Suits For Europe, Asia And Africa Market Model:
GY6 50/125/150,DELTA,ALPHA ,EX110,CG125-250,CB125-250,SUZUKI LET’S,
SEPIA ,HONDA AF18/24/27/28/34/35,HONDA LEAD ,JOG 50/90,PIAGGIO ZIP 50 ,PIAGGIO NRG,
PIAGGIO TYPHOON ,KYMCO DINK,DERBI SENDA,
MINARELLI AM6,APRILIA ,MBK/ BOOSTER, Etc.
1. How to get the best price from CZPT MOTOR?
The bulk order price can be negotiated.We will quote the lastest best price according to customer final purchase list.
2. What is your terms of payment?
T/T 30% as deposit, and 70% balance against BL copy. or by L/C.
3. What is your terms of delivery?
A: EXW, FOB, CFR, CIF.
4. How can I get samples?
Most samples could be free for you,you just need to pay the freight to your place.
The charge will be returned to you when the mass order placed.
5. What about the MOQ – minimum order quantity?
100 pcs – 1000 pcs, MOQ for different products are different, please check with us before order.
6. Do you accept OEM order?
Yes, we can customize products according to customers’ drawings or samples.
7. How about your delivery time?
Generally, it will take 15 to 30 days after receiving your advance payment. The specific delivery time depends on the items and the quantity of your order.
8. How you pack products?
We normally pack parts with poly bag or box, we also accept branded color packing.
9. What’s your available port of shipment?
We usually export through HangZhou port or ZheJiang Port.
10. Where are your products mainly exported to?
Our products are mainly exported to over 30 countries such as Germany,Poland,Russia,Mexico,Columbia,Argentina,Turkey and etc.
11. How do you make our business long-term and good relationship?
We keep good quality and competitive price to ensure our customers benefit.
We respect every customer as our friend and we sincerely do business and make friends with them,no matter where they come from.
| After-sales Service: | 1 Year |
|---|---|
| Warranty: | 1 Year |
| Type: | Counter |
| Transport Package: | Carton |
| Trademark: | TSPE OR OEM |
| Origin: | China |
| Samples: |
US$ 0/Piece
1 Piece(Min.Order) | |
|---|
| Customization: |
Available
| Customized Request |
|---|
Different Types of Gearboxes and Their Applications
There are several types of gearboxes, each designed for specific applications based on their characteristics and capabilities. Here are some common types and their applications:
- Spur Gearbox: Spur gearboxes consist of parallel-shaft gears with straight teeth. They are simple and economical, suitable for low-speed and low-torque applications such as conveyors, machine tools, and clocks.
- Helical Gearbox: Helical gearboxes have helical teeth that provide smoother and quieter operation compared to spur gears. They are used in various industries, including automotive, construction, and mining equipment.
- Bevel Gearbox: Bevel gearboxes transmit power between non-parallel shafts. They are commonly used in vehicles, marine applications, and heavy machinery where changing the direction of motion is necessary.
- Planetary Gearbox: Planetary gearboxes offer high torque density and compact size. They are used in robotics, automation, and precision machinery due to their efficiency and versatility.
- Worm Gearbox: Worm gearboxes have a worm screw meshing with a gear wheel. They provide high reduction ratios and are used in applications like conveyor systems, elevators, and packaging equipment.
- Cycloidal Gearbox: Cycloidal gearboxes use cams and pins for motion transmission, making them highly durable and shock-resistant. They find use in industrial machinery and robotics.
- Spiral Bevel Gearbox: Spiral bevel gearboxes combine the advantages of bevel and helical gears, providing high efficiency and smooth operation. They are employed in vehicles, aircraft, and machine tools.
Each type of gearbox offers specific advantages suited to its application, enabling efficient power transmission and control in various industries.
editor by CX 2023-08-23
China Best Sales Scara Gear Reducer Small Harmonic Drive Systems Cheap Harmonic Gearbox best automatic gearbox
Product Description
Company Profile
Welcome to our Harmonic Gearbox Factory, where we specialize in the production of high-quality precision gear systems. With years of experience in the industry, we have established ourselves as a trusted manufacturer and supplier of harmonic reducers to various industries worldwide.
Our Factory Facilities:
Equipped with advanced machinery and cutting-edge technology, our factory boasts a spacious and well-organized production floor. We have invested heavily in automation and robotics to ensure efficient and precise manufacturing processes. Our team of skilled technicians and engineers work diligently to maintain the highest standards of product quality.
Product Range:
At our factory, we produce a comprehensive range of harmonic reducers that cater to diverse industrial needs. Our product portfolio includes both standard series and customized designs, offering a wide selection to our customers. From small-scale applications to heavy-duty machinery, our harmonic reducers provide excellent torque handling capabilities, smooth operations, and enhanced efficiency.
Quality Assurance:
We understand the importance of delivering reliable and durable products to our customers. Each stage of our manufacturing process adheres to strict quality control measures. We source premium-grade materials from reputable suppliers, conduct rigorous inspections during production, and perform thorough testing before dispatching our products. This commitment to quality ensures that our harmonic reducers meet or exceed international standards.
Research and Development:
Innovation is at the core of our factory’s operations. Our dedicated research and development team continuously strives to improve our products and develop new solutions to meet evolving industry demands. Through constant experimentation and collaboration with industry experts, we stay ahead of the curve and deliver cutting-edge harmonic reducers that optimize performance and reliability.
Customer Satisfaction:
At our factory, customer satisfaction is paramount. We prioritize clear communication, timely delivery, and responsive after-sales support. We work closely with our clients to understand their specific requirements and provide tailored solutions that address their unique needs. Our commitment to building long-term relationships has earned us a loyal customer base that relies on our harmonic reducers for their critical applications.
Environmental Responsibility:
We are dedicated to minimizing our environmental impact and promoting sustainable practices. Our factory adheres to strict waste management protocols, energy-saving measures, and eco-friendly manufacturing techniques. We continually strive to reduce our carbon footprint and contribute positively to the communities we operate in.
Conclusion:
If you are seeking superior-quality harmonic reducers for your industrial applications, our factory is your ideal partner. With a focus on precision, innovation, and customer satisfaction, we deliver reliable and efficient gear systems that enhance the performance of your machinery. Contact us today to discuss your requirements and experience the CZPT of our harmonic reducers.
Our Advantages
High precision
A good percentage of harmonic gear reducer’s teeth are meshed at all times and are engaged at 2 zones 180 degrees apart. This means influences of tooth pitch errors and accumulated pitch errors on rotational accuracy are neutralized, which assures high positional and rotational accuracy.
Long service time
As a professional harmonic drive gearbox company and strain wave gear manufacturer in China, Hanzhen harmonic drive reducers with superior harmonic drive efficiency and long service time.
Light weight and compact size
While being less the size of conventional gearing mechanisms and less the weight, the strain wave reducer provides the same levels of torque and speed reduction ratios as its conventional counterparts enabling machinery and equipment to be made smaller and lighter.
High speed reduction ratio
A harmonic gear reducer has high single-stage reduction ratios also known as harmonic drive gear ratio or harmonic drive ratio of 1/30-1/500. Three basic components along same axle without complex structures can provide high reduction ratios.
High torque capacity
Each tooth subjected to a negligible amount of force yet provides a high torque capacity because of the way the teeth come into contact with each other and because a good percentage of the teeth in the flex spline is engaged at all times.
Minimum vibration and quiet
Hanzhen harmonic drive reducers also operate with quiet and minimal vibration.
Product Parameters
XB1-BS-CF
| Warranty | 1 Year Return & Exchange |
| Life Span | Over 15000 hrs |
| Customized Service | Size & Solution |
| Production Capacity | 50000 Pieces / year |
FAQ
Q: What should I provide when I choose a gearbox/speed reducer?
A: The best way is to provide the motor drawing with parameters. Our engineer will check and recommend the most suitable gearbox model for your reference.
Or you can also provide the below specification as well:
1) Type, model, and torque.
2) Ratio or output speed
3) Working condition and connection method
4) Quality and installed machine name
5) Input mode and input speed
6) Motor brand model or flange and motor shaft size
| Application: | Motor, Machinery, Marine, Agricultural Machinery, Robot , Automation, Scara, Cobot |
|---|---|
| Function: | Distribution Power, Clutch, Change Drive Torque, Change Drive Direction, Speed Changing, Speed Reduction, Speed Increase |
| Layout: | Three-Ring |
| Hardness: | Hardened Tooth Surface |
| Installation: | Torque Arm Type |
| Step: | Single-Step |
| Samples: |
US$ 100/Piece
1 Piece(Min.Order) | |
|---|
| Customization: |
Available
| Customized Request |
|---|
What is a Gearbox and How Does It Work?
A gearbox is a mechanical device that transmits power and changes the speed or torque of a rotating input shaft to a different output shaft. It is commonly used in various machines and equipment to control the speed and direction of motion.
Here’s how a gearbox works:
- Input Shaft: The gearbox receives rotational energy from an input shaft connected to a power source, such as an electric motor or an engine.
- Gears: Inside the gearbox are a set of gears with different sizes. These gears mesh with each other, and their arrangement determines the gear ratio, which defines how many revolutions the output shaft will make for a given rotation of the input shaft.
- Output Shaft: The output shaft is connected to the machinery or equipment that needs to be powered. As the gears rotate, the motion and power are transmitted from the input shaft to the output shaft.
- Gear Ratio: By selecting different gear combinations, the gearbox can change the speed and torque of the output shaft. A higher gear ratio results in higher torque and lower speed, while a lower gear ratio provides higher speed and lower torque.
Gearboxes play a crucial role in various applications, including automobiles, industrial machinery, robotics, and more, enabling efficient power transmission and speed control.
editor by CX 2023-08-23