Product Description
Product Description
| Product name | In stock CHINAMFG 5 speed manual transmission gearbox for 4JB1T light truck, pickup |
| Des. | 4 cylinders in line, water cooling, 4 stroke |
| Rate power & RPM | 92.5HP/3600rpm |
| Bore & Stroke | 93*102 |
| Displacement | 2.7 L |
| Gross Weight | 270kg |
| Engine cooling method | cooling fan |
| Futures | 1 , More rugged and reliable 2 , High torque output hence pulling power is high 3 , Gears are tall 4 , Fuel efficiency is high 5 , Service requirement is less frequent |
Detailed Photos
Company Profile
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| Application: | Motor, Machinery, Car |
|---|---|
| Function: | Distribution Power, Clutch, Change Drive Torque, Change Drive Direction, Speed Changing, Speed Reduction, Speed Increase |
| Layout: | Cycloidal |
| Hardness: | Soft Tooth Surface |
| Installation: | Horizontal Type |
| Step: | Single-Step |
| Customization: |
Available
| Customized Request |
|---|
Common Problems with Gearboxes and How to Troubleshoot Them
Gearboxes can encounter various issues over time. Here are some common problems and troubleshooting steps:
- Noise and Vibration: Excessive noise or vibration may indicate misalignment, worn gears, or insufficient lubrication. Check alignment, inspect gears for wear, and ensure proper lubrication.
- Overheating: Overheating can be caused by high friction, inadequate lubrication, or overloading. Verify lubrication levels, reduce loads, and ensure proper ventilation.
- Leakage: Oil leaks may result from worn seals or gaskets. Inspect and replace damaged seals, and ensure proper sealing.
- Reduced Performance: Decreased performance could be due to worn gears, damaged bearings, or misalignment. Inspect components, replace damaged parts, and realign as needed.
- Gear Wear and Tooth Damage: Wear on gear teeth can result from excessive loads or poor lubrication. Replace worn gears and ensure proper lubrication.
- Shaft Misalignment: Shaft misalignment can lead to increased wear and noise. Realign shafts using precision measurement tools.
- Lubrication Issues: Inadequate or contaminated lubrication can cause premature wear. Regularly check and replace lubricant, and use the correct type for your gearbox.
- Bearing Failure: Bearing failure may result from overload, misalignment, or inadequate lubrication. Replace worn bearings and address underlying issues.
- Seal Damage: Damaged seals can lead to leaks and contamination. Replace seals and ensure proper installation.
- Gearbox Lockup: Gearbox lockup may occur due to foreign objects or damaged components. Disassemble and inspect the gearbox, removing any obstructions and replacing damaged parts.
Regular maintenance, proper lubrication, and timely troubleshooting are key to addressing gearbox problems and ensuring smooth operation.
editor by CX 2024-04-13
China Standard Declutchable Manual Override Worm Gearbox for Pneumatic Actuator Hand Operation Manual Side Handwheel gearbox engine
Product Description
Declutchable Manual Override Worm Gearbox For Pneumatic Actuator Hand Operation Manual Side Handwheel
Features
- Compact and light weight
- ISO 5211 mounting pattern
- Machined gear teeth provide smoothest operation and longer life
- High cycle life with low friction of all moving and sliding surfaces
- Modular design provide the most efficient and effective solution to a full range of manual overriding requirements.
- Protection grade IP65
Product Specification
Product Details Show
Product Processing Show
Product Packing
Product Application
Product Test Machine
Certificate
Contact Us
Web: tychenfluid /* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| Certification: | ISO, CE |
|---|---|
| Power Supply: | Manual |
| Power Source: | Manual |
| Temperature: | Ordinary Temperature |
| Connection: | Flange |
| Material: | Cast Iron |
| Samples: |
US$ 50/Piece
1 Piece(Min.Order) | |
|---|
| Customization: |
Available
| Customized Request |
|---|
Common Problems with Gearboxes and How to Troubleshoot Them
Gearboxes can encounter various issues over time. Here are some common problems and troubleshooting steps:
- Noise and Vibration: Excessive noise or vibration may indicate misalignment, worn gears, or insufficient lubrication. Check alignment, inspect gears for wear, and ensure proper lubrication.
- Overheating: Overheating can be caused by high friction, inadequate lubrication, or overloading. Verify lubrication levels, reduce loads, and ensure proper ventilation.
- Leakage: Oil leaks may result from worn seals or gaskets. Inspect and replace damaged seals, and ensure proper sealing.
- Reduced Performance: Decreased performance could be due to worn gears, damaged bearings, or misalignment. Inspect components, replace damaged parts, and realign as needed.
- Gear Wear and Tooth Damage: Wear on gear teeth can result from excessive loads or poor lubrication. Replace worn gears and ensure proper lubrication.
- Shaft Misalignment: Shaft misalignment can lead to increased wear and noise. Realign shafts using precision measurement tools.
- Lubrication Issues: Inadequate or contaminated lubrication can cause premature wear. Regularly check and replace lubricant, and use the correct type for your gearbox.
- Bearing Failure: Bearing failure may result from overload, misalignment, or inadequate lubrication. Replace worn bearings and address underlying issues.
- Seal Damage: Damaged seals can lead to leaks and contamination. Replace seals and ensure proper installation.
- Gearbox Lockup: Gearbox lockup may occur due to foreign objects or damaged components. Disassemble and inspect the gearbox, removing any obstructions and replacing damaged parts.
Regular maintenance, proper lubrication, and timely troubleshooting are key to addressing gearbox problems and ensuring smooth operation.
editor by CX 2024-04-03
China OEM Pickup Transmission Gearbox for CZPT Hilux 4X4 Diesel Manual with Best Sales
Product Description
Product Description
| Car Model: | TOYOTA 3y/4y 4WD |
| Material: | Cast iron, aluminum |
| PCS/CTN | 1 PCS |
| Package | Neutral packing |
Our Product:
1, We can supply almost all spare parts suitable for Chinese cars such as JAC, FAW, BYD, DFM, Geely, Chery, Chana, Lifan, Zotye, Great Wall, Hafei, Xihu (West Lake) Dis., Changhe, Gonow and Japanese cars Suzuki.
2, the manual gearbox is fixed by aluminum-alloy case and cast iron intermediate plate for a lightweight structure with big torque and low noise operation.
3, All gears adopted optimum designed spindly teeth and precision shot peen gear faces and roots to decrease noise of and increase carrying capacity.
Packaging & Shipping
Company Profile
Our Market:
Our products are good sold in Southeast Asia, Africa, South America, Middle East and Europe, such as Vietnam, Malaysia, Singapore, Indonesia, Thailand, Brazil, Ecuador, Mexico, Chile, Peru, Panama, Colombia , Cuba, USA, Algeria, Morocco, Egypt, Sudan, Zimbabwe, South Africa, Russia, Iraq , Kazakhstan, Italy and etc
we are the professional trading company located in China with the most efficient exporting process. we have deep cooperated with hundreds of factories around China. The products we provide can match your different demands. choose us, we can establish a CHINAMFG business cooperation relationship with each other.
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| Warranty: | 1 Year |
|---|---|
| Type: | Gearbox |
| Material: | Aluminum |
| Certification: | ISO |
| Automatic: | Manual |
| Standard: | Standard |
| Customization: |
Available
| Customized Request |
|---|
How to Choose the Right Gearbox for Your Machinery
Selecting the appropriate gearbox for your machinery involves careful consideration of several key factors. Here’s a step-by-step guide to help you make the right choice:
- Identify Application Requirements: Understand the specific requirements of your machinery, including torque, speed, load, direction of rotation, and duty cycle.
- Choose Gear Type: Determine the type of gears that best suit your needs, such as spur, helical, bevel, planetary, or others, based on factors like efficiency, noise level, and space constraints.
- Calculate Gear Ratio: Calculate the required gear ratio to achieve the desired output speed and torque. Consider factors like input and output shaft speeds.
- Select Gear Material: Choose appropriate gear materials based on factors like durability, wear resistance, and corrosion resistance. Common materials include steel, cast iron, and various alloys.
- Consider Efficiency: Evaluate the gearbox’s efficiency and select one that meets your energy efficiency requirements.
- Account for Load Conditions: Analyze the load conditions, such as constant or intermittent loads, shock loads, and starting and stopping frequencies.
- Check Lubrication Requirements: Consider the lubrication needs of the gearbox and ensure proper lubrication for smooth operation and longevity.
- Factor in Space Constraints: Consider the available space for installing the gearbox and choose a size that fits within your machinery.
- Assess Environmental Conditions: Evaluate the operating environment, including temperature, humidity, and exposure to dust or corrosive substances.
- Review Mounting Options: Determine the mounting options that work best for your machinery, such as foot-mounted, flange-mounted, or shaft-mounted gearboxes.
- Consult with Experts: Seek advice from gearbox manufacturers or engineers to ensure you make an informed decision.
Choosing the right gearbox is crucial for achieving optimal machinery performance, longevity, and reliability.
editor by CX 2024-03-08
China Best Sales CZPT Spare Parts LC5t35 Power Manual 5f1r of CZPT Light Duty Truck Transmission Gearbox gearbox definition
Product Description
Product Description
Overview
Compatible vehicles
| Car Fitment | Model | Year |
|---|---|---|
| SINOTRUK (CNHTC) | Jmc Spare Parts LC5t35 Power Manual 5f1r of CHINAMFG Light Duty Truck Transmission Gearbox | 2 |
|
Serial No |
80032003 |
|
|
Total Ratio |
0.84-13.8 |
|
|
Speed Ratio |
IMP/U 6,00 |
|
|
Oil Capacity(L) |
15.5 |
|
|
Oil Grade See Lubric. List |
02 |
|
|
Quality |
High-Quality |
|
|
Packing |
Customers’ Requirement |
Packaging & delivery
Package Type:
According to international export standards or customized according to your requirements
Supply Ability
Supply Ability
1000 Piece/Pieces per Month
Detailed Photos
Product details
n
Company Profile
ZheJiang Yontan Import and Export Co., Ltd. was established in HangZhou, the capital of ZheJiang Province, a famous national historical and cultural city with profound heritage. The company is mainly engaged in the export of complete vehicles of SINOTRUC, HOWO, SHACMAN, FOTON, FAW, XIHU (WEST LAKE) DIS., XIHU (WEST LAKE) DIS.FENG and other brands. It is engaged in the export sales of a full range of truck accessories and assemblies. The products distributed by the company are mainly supplied to major domestic transportation units, oil and gas transportation teams, municipal engineering fleets and civil engineering fleets, as well as major foreign construction companies and transportation companies.
On the basis of the continuous development of the company’s business, we are committed to exploring the international market. So far, our market has covered China, Eastern Europe, the Middle East, Africa, Southeast Asia, South America and other countries and regions. Our integrity is everywhere and we are deeply trusted by customers. Our company has a large warehouse and a professional management team, which can quickly find suitable parts for customers, and can provide services such as good packaging, safe storage, and fast transportation to meet the diverse needs of customers at any time.
The company adheres to the concept of “integrity, CHINAMFG and sustainable”, and sincerely welcomes customers to come to our company to discuss business cooperation.
Company Profile
Certifications
/* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| After-sales Service: | 24h Full Technical Support |
|---|---|
| Warranty: | 12 Months |
| Type: | Gearbox |
| Certification: | ISO9001 |
| Driving System Parts: | Gearbox |
| Electrical System Parts: | Gearbox |
| Customization: |
Available
| Customized Request |
|---|
Different Types of Gearboxes and Their Applications
There are several types of gearboxes, each designed for specific applications based on their characteristics and capabilities. Here are some common types and their applications:
- Spur Gearbox: Spur gearboxes consist of parallel-shaft gears with straight teeth. They are simple and economical, suitable for low-speed and low-torque applications such as conveyors, machine tools, and clocks.
- Helical Gearbox: Helical gearboxes have helical teeth that provide smoother and quieter operation compared to spur gears. They are used in various industries, including automotive, construction, and mining equipment.
- Bevel Gearbox: Bevel gearboxes transmit power between non-parallel shafts. They are commonly used in vehicles, marine applications, and heavy machinery where changing the direction of motion is necessary.
- Planetary Gearbox: Planetary gearboxes offer high torque density and compact size. They are used in robotics, automation, and precision machinery due to their efficiency and versatility.
- Worm Gearbox: Worm gearboxes have a worm screw meshing with a gear wheel. They provide high reduction ratios and are used in applications like conveyor systems, elevators, and packaging equipment.
- Cycloidal Gearbox: Cycloidal gearboxes use cams and pins for motion transmission, making them highly durable and shock-resistant. They find use in industrial machinery and robotics.
- Spiral Bevel Gearbox: Spiral bevel gearboxes combine the advantages of bevel and helical gears, providing high efficiency and smooth operation. They are employed in vehicles, aircraft, and machine tools.
Each type of gearbox offers specific advantages suited to its application, enabling efficient power transmission and control in various industries.
editor by CX 2023-12-19
China Best Sales China Car Gearbox for Chana Honor Transmission 1.5L Mr515b01 Manual Gearbox planetary gearbox
Product Description
| Engine model | China Car Gearbox for CHANA HONOR Transmission 1.5L MR515B01 Manual Gearbo | MOQ | 1 pcs |
| Type | from Manual ZheJiang qingshan | Delivery starts | 1-2 days after paid |
| Car make | chana gearbox | Shipping term | UPS, DHL, FEDEX, TNT,EMS,Sea, Air |
| Packing | Wooden case | Supplier Tel/ | NO |
| Payment term | Visa, Master Card,TT | Size | standard |
Specifications
1.Supply to USA,Europe,and middle east ,southeast asia ,russia
2.Matrial: HIGH Quality
3.Professional Perfomance Auto parts supplier
Detailed Images
Specifications
1.Supply to USA,North Of America,South America
2.Small Quantity acceptable
3.Warranty: 12 Month and test before shipment for Each Products
4.We have many kinds of CHINAMFG wheel Pinion,Dana,Korea Model,Japanese Model,and European Model.
New models are welcome if samples or technical drawings can be supplied. located in HangZhou,ZHangZhoug Province. Have been committed to developing & supplying Auto Transmission Parts,putting ourselves to clients’ shoes to solve their demands.our company is mainly engaged in Auto Transmission Parts such as Transmission gearbox,Gear haft,Synchronizer ring,Cylinder Head and Differcial Assembly and so on.
With our honesty and credit, we sincerely hope to cooperate with you for greater development. Welcome new and old customers from all walks of life to contact us for future business relationships and achieving mutual success!
| Type: | Gearbox Gear |
|---|---|
| Material: | Steel |
| Certification: | ISO |
| Automatic: | Automatic |
| Standard: | Standard |
| Condition: | New |
| Samples: |
US$ 500/Piece
1 Piece(Min.Order) | |
|---|
| Customization: |
Available
| Customized Request |
|---|
How to Calculate Gear Ratio in a Gearbox
Gear ratio is a fundamental parameter in a gearbox that represents the ratio of the number of teeth between two gears. It determines how much the output gear rotates in relation to the input gear. The formula to calculate gear ratio is:
Gear Ratio (GR) = Number of Teeth on Output Gear / Number of Teeth on Input Gear
Here’s a step-by-step guide on how to calculate gear ratio:
- Identify the input and output gears in the gearbox.
- Count the number of teeth on the output gear (the gear connected to the output shaft).
- Count the number of teeth on the input gear (the gear connected to the input shaft).
- Plug the values into the gear ratio formula: GR = Number of Teeth on Output Gear / Number of Teeth on Input Gear.
- Calculate the gear ratio by performing the division.
The gear ratio provides insight into how much the input gear needs to rotate to achieve a certain rotation of the output gear. It influences torque, speed, and direction of rotation in the gearbox.
editor by CX 2023-12-08
China high quality Ck Series Multi-Turn Manual Valve Bevel Gearbox for Gate Valves cycloidal gearbox
Product Description
Product Description
CK series multi-turn bevel gearboxes suitable for gate valves, globe valves, sluice,etc. Handwheel and protection cover can choose according to your requirements.
CK series multi-turn bevel gearbox are with good mechanical quality and steady operating performance which apply to deal with variety climate and temperature. The flange connecting to valve is according to ISO5211.
Product Parameters
| Model | RK03 | RK05 | RK1 | 2CK2 | 2CK3 | 2CK5 | 2CK8 | 2CK10 | |
| Ratio | 2.6:1 | 3:1 | 3.6:1 | 4.2:1 | 4.2:1 | 5:1 | 6.3:1 | 7.1:1 | |
| Max stem diameter | 42 | 52 | 60 | 70 | 80 | 95 | 110 | 130 | |
| Max output torque N.m |
2500 | 3500 | 4000 | 6800 | 8200 | 14500 | 18600 | 26100 | |
| Flange | F12 | F14 | F16 | (F20) | F25 | F30 | F35 | F40 | |
| φD | 150 | 175 | 210 | 250 | 300 | 350 | 415 | 474 | |
| PCD | D0 | 125 | 140 | 165 | 205 | 254 | 298 | 356 | 406 |
| N-H-DP | 4-M12-18 | 4-M16-24 | 4-M20-30 | 8-M16-24 | 8-M16-24 | 8-M20-30 | 8-M30-45 | 8-M36-54 | |
Company Profile
FAQ
Q: What’s your main products?
A: Our main products are worm gearbox, bevel gearbox and spur gearbox for gate valve, globe valve, ball valve, butterfly valve and etc.
Q: How long is your delivery time?
A: Delivery time was depends on the quantity of the order and our inventory, normally is 10~15 days.
Q: Term of payment?
A: T/T 30% in advance, T/T balance before shipment.
Q: Can you provide free sample?
A: Yes, we can provide the sample for free, but the shipping costs need paid by yourself.
Q: Could you specially design and produce according to client’s requirements?
A: Yes, we can
If any other questions about our products, welcome to contact us.
| Application: | Industry Valves |
|---|---|
| Function: | Change Drive Torque |
| Step: | Single-Step |
| Customization: |
Available
| Customized Request |
|---|
.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}
| Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
|---|
| Payment Method: |
|
|---|---|
|
Initial Payment Full Payment |
| Currency: | US$ |
|---|
| Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
|---|
Importance of Lubrication in Gearbox Performance
Lubrication plays a critical role in ensuring the optimal performance, longevity, and reliability of gearboxes. Proper lubrication provides several key benefits:
- Reduces Friction and Wear: Lubrication forms a protective layer between gear teeth, bearings, and other moving components, reducing friction and minimizing wear and tear.
- Heat Dissipation: Lubricants help dissipate the heat generated during gear operation, preventing overheating and potential damage to components.
- Noise Reduction: Adequate lubrication can dampen noise and vibration produced by gear meshing, leading to quieter and smoother operation.
- Sealing and Contaminant Prevention: Lubricants create a barrier that seals out contaminants like dust, dirt, and moisture, preventing their entry and reducing the risk of corrosion and damage.
- Enhanced Efficiency: Proper lubrication reduces energy losses due to friction, improving the overall efficiency of the gearbox.
- Extended Lifespan: Lubrication helps prevent premature component wear and failure, extending the lifespan of the gearbox and minimizing the need for costly repairs or replacements.
- Optimal Performance: Gearboxes operate within specified tolerances when properly lubricated, ensuring they deliver the intended performance and functionality.
It’s essential to use the recommended lubricant type, viscosity, and change intervals specified by the gearbox manufacturer to ensure the best possible performance and longevity. Regular monitoring and maintenance of lubrication levels are crucial to preserving the health of the gearbox and its components.
editor by CX 2023-11-20
China Custom De-Clutchable Worm Gear Box Manual Override Worm Gearbox Hdm Series gearbox drive shaft
Product Description
Description
HDM De-clutchable wormgear offers simple and reliable manual positioning of the valves, dampers and other quarter-turn devices when overriding existing pneumatic, electric or hydraulic quarter-turn actuators. All unit are suitable for both indoor and outdoor installation. The modular design is to provide the most efficient and effective solution to a full range of manual overriding requirements.
Main Product features
To engage manual operation, first pull out the lock handle and then rotate the clutch lever in anti-clockwise direction until engagement takes place. To return to automatic mode, first pull out the lock handle and then rotate the clutch lever in clockwise.
Remark:The bottom center of the HDM-4 is either F10/F14 or F10/F12
| New Manual Override | Countershaft | Valve Connection | Actuator Connection | ||||||||||
| b1 | N | b2 | M | D1 | 4-M1 | D2 | 4-M2 | E | D3 | 4-Φ1 | D4 | 4-Φ2 | |
| HDM-1 | 14 | 22 | 14 | 16 | Φ50 | 4-M6 | Φ70 | 4-M8 | 70*70 | Φ50 | 4-Φ6.5 | Φ70 | 4-Φ8.5 |
| HDM-2 | 17 | 22 | 17 | 18 | Φ70 | 4-M8 | Φ102 | 4-M10 | 95*95 | Φ70 | 4-Φ8.5 | Φ102 | 4-Φ10.5 |
| HDM-3 | 22 | 28 | 22 | 22 | Φ102 | 4-M10 | Φ125 | 4-M12 | 114*114 | Φ102 | 4-Φ10.5 | Φ125 | 4-Φ12.5 |
| HDM-4 | 27 | 32 | 27 | 30 | Φ102 | 4-M10 | Φ125 | 4-M12 | 129*129 | Φ125 | 4-Φ12.5 | Φ140 | 4-Φ16.5 |
| HDM-5 | 36 | 45 | 36 | 38 | Φ140 | 4-M16 | / | / | 156*156 | Φ140 | 4-Φ17 | Φ165 | 4-Φ21 |
| HDM-6 | 46 | 50 | 46 | 48 | Φ165 | 4-M20 | / | / | 160*160 | Φ165 | 4-Φ22 | / | / |
| New Manual Override | A | B | ΦC | F | T | Y | H | S | K | Ratio | Rated Input | Rated Onput |
| HDM-1 | 90 | 55 | Φ88 | 115 | 44 | 145 | 120 | 53 | 10 | 26:1 | Nm | 250Nm |
| HDM-2 | 125 | 64 | Φ110 | 135 | 62.5 | 178 | 133 | 56.5 | 13 | 28:1 | Nm | 450Nm |
| HDM-3 | 140 | 71 | Φ129 | 166 | 70 | 212 | 180 | 68.7 | 12.5 | 38:1 | Nm | 700Nm |
| HDM-4 | 188.5 | 93 | Φ174 | 202 | 94 | 280 | 195 | 84 | 15 | 54:1 | Nm | 1200Nm |
| HDM-5 | 222 | 110 | Φ205 | 245 | 110 | 315 | 225 | 92 | 15 | 80:1 | Nm | 2000Nm |
| HDM-6 | 252 | 120 | Φ275 | 280 | 125 | 320 | 252 | 102 | 15 | 78:1 | Nm | 3000Nm |
1. Question:What is your main products?
Answer:Our main products are Pneumatic Actuators, Electric Actuators, Actuated Valves And Valve actuators Accessories..
2. Question:Are you a trader or manufacturer ?
Answer: We are the pneumatic actuators and electric actuators manufacturer , we have ability to do the customization products with experienced team, And we have own factory and production line.
3. Question:How do your make the quality guarantee for actuators?
Answer:We have our own quality control system for incoming and outgoing of the materials, every product will be under controlled and tested before delivery to our customer , and we also provide 18 months guarantee ,beside we provide technical supporting .
4. Question:When can I receive the Price of valve actuators ?
Answer:We will give the Quotation Within 24 hours after we get your inquiry .Or Your can call or message us if it’s quite urgently.
5. Question:How to order our pneumatic actuators and electric actuators ?
Answer:Please send us your inquiry by Email, , etc. we need to know the following informations before giving the formal Quotation.
1) Product information in details, Quantity, Other requirements
2) Delivery time required
6. Question:How can I get a sample to check your quality?
Answer:Contact with our sales expert to arrange the sample delivery. Please send us the details of the sample before placing the order.
7. Question:Shall we pay the sample cost and transportation cost ?
Answer:We will provide the sample by free of charge. Your will bear the freight cost.
8. Question:How long to prepare the sample ?
Answer:Most of our products are under regular production and some of them we keep in stocks.
9. Question:How to delivery the sample to our place?
Answer:Your can provide your forwarders contacts if any, or we will arrange it for you.
10. Question:What about the delivery date if we place the formal order ?
Answer:Usually it takes 15~20days on the production .We know that on-time delivery is very crucial to our customers to meet dead-lines.
We monitor and expedite our supply chain to ensure that we delivery our products to our customers on-time all the time.
| Installation: | Manual |
|---|---|
| Type: | Worm Gear Box |
| Worm Material: | Qt400 |
| Shaft Material: | 45#Steel |
| Transport Package: | Foam and Carton Box |
| Trademark: | Hearken |
| Samples: |
US$ 50/Piece
1 Piece(Min.Order) | |
|---|
| Customization: |
Available
| Customized Request |
|---|
What is a Gearbox and How Does It Work?
A gearbox is a mechanical device that transmits power and changes the speed or torque of a rotating input shaft to a different output shaft. It is commonly used in various machines and equipment to control the speed and direction of motion.
Here’s how a gearbox works:
- Input Shaft: The gearbox receives rotational energy from an input shaft connected to a power source, such as an electric motor or an engine.
- Gears: Inside the gearbox are a set of gears with different sizes. These gears mesh with each other, and their arrangement determines the gear ratio, which defines how many revolutions the output shaft will make for a given rotation of the input shaft.
- Output Shaft: The output shaft is connected to the machinery or equipment that needs to be powered. As the gears rotate, the motion and power are transmitted from the input shaft to the output shaft.
- Gear Ratio: By selecting different gear combinations, the gearbox can change the speed and torque of the output shaft. A higher gear ratio results in higher torque and lower speed, while a lower gear ratio provides higher speed and lower torque.
Gearboxes play a crucial role in various applications, including automobiles, industrial machinery, robotics, and more, enabling efficient power transmission and speed control.
editor by CX 2023-10-18
China Hot selling My Series Part-Turn Manual Valve Worm Gearbox for Butterfly Ball Valves cvt gearbox
Product Description
Product Description
MY series Part-turn worm gearboxes suitable for Ball Valves, Butterfly Valves, Plug Valves,etc. Handwheel can choose according to your requirements.
MY series part-turn worm gearbox has good mechanical quality and steady operating performance. It has high mechanical efficiency, small size with new design, and it’s very easy to operate. The flange connecting to valve is according to ISO5211.
Product Parameters
| Model | MY-000 | MY-00 | MY-0 | MY-1 | MY-2 | MY-3 | MY-4 | MY-5 | MY-6 | |
| Ratio | 24:1 | 33:1 | 39:1 | 46:1 | 49:1 | 53:1 | 60:1 | 62:1 | 68:1 | |
| Flange | F07 | F10 | F12 | F14 | F16 | (F20) | F25 | F30 | F35 | |
| φD | 90 | 125 | 150 | 175 | 210 | 250 | 300 | 350 | 415 | |
| PCD | D0 | 70 | 102 | 125 | 140 | 165 | 205 | 254 | 298 | 356 |
| N-H-DP | 4-M8-15 | 4-M10-15 | 4-M12-18 | 4-M16-24 | 4-M20-30 | 8-M16-24 | 8-M16-24 | 8-M20-27 | 8-M30-45 | |
| Max stem diameter | 20 6×6 |
30 8×7 |
38 10×8 |
45 14×9 |
55 16×10 |
65 20×12 |
80 22×14 |
105 28×16 |
115 32×18 |
|
Company Profile
FAQ
Q: What’s your main products?
A: Our main products are worm gearbox, bevel gearbox and spur gearbox for gate valve, globe valve, ball valve, butterfly valve and etc.
Q: How long is your delivery time?
A: Delivery time was depends on the quantity of the order and our inventory, normally is 10~15 days.
Q: Term of payment?
A: T/T 30% in advance, T/T balance before shipment.
Q: Can you provide free sample?
A: Yes, we can provide the sample for free, but the shipping costs need paid by yourself.
Q: Could you specially design and produce according to client’s requirements?
A: Yes, we can
If any other questions about our products, welcome to contact us.
|
Shipping Cost:
Estimated freight per unit. |
To be negotiated |
|---|
| Application: | Industry Valves |
|---|---|
| Function: | Change Drive Torque |
| Step: | Single-Step |
| Customization: |
Available
| Customized Request |
|---|
How to Choose the Right Gearbox for Your Machinery
Selecting the appropriate gearbox for your machinery involves careful consideration of several key factors. Here’s a step-by-step guide to help you make the right choice:
- Identify Application Requirements: Understand the specific requirements of your machinery, including torque, speed, load, direction of rotation, and duty cycle.
- Choose Gear Type: Determine the type of gears that best suit your needs, such as spur, helical, bevel, planetary, or others, based on factors like efficiency, noise level, and space constraints.
- Calculate Gear Ratio: Calculate the required gear ratio to achieve the desired output speed and torque. Consider factors like input and output shaft speeds.
- Select Gear Material: Choose appropriate gear materials based on factors like durability, wear resistance, and corrosion resistance. Common materials include steel, cast iron, and various alloys.
- Consider Efficiency: Evaluate the gearbox’s efficiency and select one that meets your energy efficiency requirements.
- Account for Load Conditions: Analyze the load conditions, such as constant or intermittent loads, shock loads, and starting and stopping frequencies.
- Check Lubrication Requirements: Consider the lubrication needs of the gearbox and ensure proper lubrication for smooth operation and longevity.
- Factor in Space Constraints: Consider the available space for installing the gearbox and choose a size that fits within your machinery.
- Assess Environmental Conditions: Evaluate the operating environment, including temperature, humidity, and exposure to dust or corrosive substances.
- Review Mounting Options: Determine the mounting options that work best for your machinery, such as foot-mounted, flange-mounted, or shaft-mounted gearboxes.
- Consult with Experts: Seek advice from gearbox manufacturers or engineers to ensure you make an informed decision.
Choosing the right gearbox is crucial for achieving optimal machinery performance, longevity, and reliability.
editor by CX 2023-09-24
China Custom Manual Transmission Gearbox for CZPT Hiace 3L Other Auto Transmission Systems supplier
Product Description
Product Description
|
Place of Origin |
China |
|
|
ZHangZhoug |
|
Brand Name |
TOSEN |
|
Application |
Automobile |
|
Product name |
Manual Transmission Gearbox for CZPT Hiace 3L Other Auto Transmission Systems |
| Manual Transmission Gearbox for CZPT Hiace 3L Other Auto Transmission Systems | |
| Bandaging Materials | Rubber |
|
Specification |
43cm*32cm*8cm |
|
Keywords |
gearbox for TOYOTA |
|
Service |
OEM Standard Service |
|
Sample |
Avaiable |
|
Quality |
100% Tested |
Company Profile
HangZhou CZPT AUTO PART CO.,LTD located in HangZhou , ZHangZhoug Province .
Have been committed to developing & supplying Auto Transmlsslon Parts , we putting ourselves to clients’ shoes to serve their demands .
Our company is mainly engaged in Auto Transmission Parts such as Transmission Gearbox , Gear Shafts, Synchronizer rings , Cylinder Heads, Differential Assembly, and some high technology parts like Nox Sensors, Cable Harness, TCU and so on .
What’s more, our products have been exported to North America, Middle East , Southeast Asia, Russia, Europe, etc. Through unswerving pursuit for high quality, our own products have been known and earned a good reputation in those markets .
With our honesty and sinceritity, we do hope to cooperate with you for a greater development .
Welcome our new and old customers from all walks of life to contact us for future business relationships and evetually achieve mutual success!
FAQ
Q1:
Could you please reply me within 3 hours?
A:
Why not? Absolutely that we will reply you as soon as possible, it usually takes half an hour for us to reply our customers inquiry.
Q2:
Could you please send me the detail information even without my asking you to do so?
A:
Haha, that’s what we are doing now, we aim at showing the most thorough details to our customers in order to show that we are professional, and our quality is guaranteed.
Q3:
Want to know more about us?
A:
Here is a brief introduction. We are based in ZHangZhoug, China, start from 2017,sell to South America(20.00%),Mid East(20.00%),North America(15.00%),Southeast Asia(15.00%),Africa(15.00%),Eastern Europe(5.00%),Eastern Asia(5.00%),Western Europe(5.00%). There are total about 11-50 people in our office.
Q4:
How to show that your products are in good condition?
A:
No worry about our quality. We can CZPT contract to affirm you that we are responsible, honest and trustworthy.
Besides, there is always a pre-production sample for customers before mass production; and always a final Inspection before shipment.
Q5:
Your main products?
A:
Our main products are Cable Wiring Harness, Sensor, Booster Pump and Power Steering Pump, Turbocharger, Hydraulic Release Bearing, Gearbox for ZF and Eaton, and Engine. We have specialized in those parts for more than 17 years.
Q6:
Are you a trading company or manufacturer ?
A:
? This might be the most popular question that our customers search for. No worry about our identity, we are a factory-combined trading company. Because we are a company rooting from our factory, so our price is almost the EXW price. So that’s why our price is called “reasonable”.
Q7:
When I need help in China, could you please give me a hand?
A:
I just want to say: WELCOME!
Just throw your problems here, let us to find out the best solution for you.
| Application: | Motor, Electric Cars, Motorcycle, Machinery, Marine, Agricultural Machinery, Car |
|---|---|
| Layout: | Other |
| Hardness: | Other |
| Installation: | Other |
| Step: | Other |
| Type: | Other |
| Samples: |
US$ 240/Piece
1 Piece(Min.Order) | |
|---|
| Customization: |
Available
| Customized Request |
|---|
How to Calculate Gear Ratio in a Gearbox
Gear ratio is a fundamental parameter in a gearbox that represents the ratio of the number of teeth between two gears. It determines how much the output gear rotates in relation to the input gear. The formula to calculate gear ratio is:
Gear Ratio (GR) = Number of Teeth on Output Gear / Number of Teeth on Input Gear
Here’s a step-by-step guide on how to calculate gear ratio:
- Identify the input and output gears in the gearbox.
- Count the number of teeth on the output gear (the gear connected to the output shaft).
- Count the number of teeth on the input gear (the gear connected to the input shaft).
- Plug the values into the gear ratio formula: GR = Number of Teeth on Output Gear / Number of Teeth on Input Gear.
- Calculate the gear ratio by performing the division.
The gear ratio provides insight into how much the input gear needs to rotate to achieve a certain rotation of the output gear. It influences torque, speed, and direction of rotation in the gearbox.
editor by CX 2023-09-10
China best Yj-Zc Series Manual Valve Spur Gearbox wholesaler
Product Description
Introduction:
YJ-ZC series is 360 degree multi-turn spur gearbox, suitable for gate valves, globe valves,etc. handwheel and stem protection cover can choose according to your requirements.
YJ-ZC series multi-turn spur gearbox are with good mechanical quality and steady operating performance which apply to deal with variety climate and temperature. The flange connecting to valve is according to ISO5211.
Material: Ductile iron, Cabon steel
Output torque: 459Nm to 6528Nm
Protection grade: IP65 (IP67,IP68 optional)
Painting: Blue, Grey, Black (Customizable)
| Application: | Industry Valves |
|---|---|
| Function: | Change Drive Torque |
| Type: | Spur Gearbox |
| Operation: | Manual |
| Protection Grade: | IP65 (IP67,IP68 Optional) |
| Transport Package: | Plywood Case |
| Customization: |
Available
| Customized Request |
|---|
What is a Gearbox and How Does It Work?
A gearbox is a mechanical device that transmits power and changes the speed or torque of a rotating input shaft to a different output shaft. It is commonly used in various machines and equipment to control the speed and direction of motion.
Here’s how a gearbox works:
- Input Shaft: The gearbox receives rotational energy from an input shaft connected to a power source, such as an electric motor or an engine.
- Gears: Inside the gearbox are a set of gears with different sizes. These gears mesh with each other, and their arrangement determines the gear ratio, which defines how many revolutions the output shaft will make for a given rotation of the input shaft.
- Output Shaft: The output shaft is connected to the machinery or equipment that needs to be powered. As the gears rotate, the motion and power are transmitted from the input shaft to the output shaft.
- Gear Ratio: By selecting different gear combinations, the gearbox can change the speed and torque of the output shaft. A higher gear ratio results in higher torque and lower speed, while a lower gear ratio provides higher speed and lower torque.
Gearboxes play a crucial role in various applications, including automobiles, industrial machinery, robotics, and more, enabling efficient power transmission and speed control.
editor by CX 2023-08-16