Product Description
Product Description
| Item | Unit | Parameter | |||
| Backhoe bucket capacity | m3 | 0.3 | |||
| Rated loading bucket capacity | m3 | 1 | |||
| Rated Lifting Force | KN | >25 | |||
| Equipment weight | kg | 7840 | |||
| Backhoe turning angle | Left | º | 90 | ||
| Right | º | 90 | |||
| Backhoe parameter | Max. CHINAMFG radius | mm | 5481 | ||
| Max. dump height | mm | 3737 | |||
| Radius at the max. dump height | mm | 1084 | |||
| Max. CHINAMFG radius at ground level | mm | 5105 | |||
| Digging buckets max. rotating angle | º | 180 | |||
| Max. CHINAMFG depth | mm | 4340 | |||
| Max. CHINAMFG force | KN | 50±10% | |||
| Loading parameter | Max. dump height | mm | 2626 | ||
| Dump reach at max. dump height | mm | 726 | |||
| Bucket draw back angle | Transportation position | º | 43.5 | ||
| Ground position | º | 36.5 | |||
| Dump angle | º | 43.5 | |||
| Digging depth | mm | 191 | |||
| Max. breakout force | KN | >40 | |||
| Max. grade ability | º | >30 | |||
| Max. traction power | KN | 70-75 | |||
| Min. turning radius | mm | 4300 | |||
| Wheelbase | mm | 2320 | |||
| Front wheel track | mm | 1910 | |||
| Rear wheel track | mm | 1820 | |||
| Minimum ground clearance | mm | 500 | |||
| Total length | mm | 7100 | |||
| Total height (Cab)() | mm | 2870 | |||
| Total Width | mm | 2730 | |||
| Bucket width | mm | 2300 | |||
| Digging end bucket width | mm | 750 | |||
| Hydraulic tank | L | 155 | |||
| Diesel tank | L | 100 | |||
| Tire | 14-17.5 | 19.5L-24 | |||
| Voltage | V | 12 | |||
| Engine | cummins 75kw | ||||
Detailed Photos
Youtube work video https://youtu.be/hAjUzpMdKC8
Product Parameters
Multi-functional Wheeled Excavator Loader
The wheeled excavator loader is a multi-functional engineering machinery that incorporates excavating and loading into an organic whole. It is rationally distributed and compact, comfortable and convenient to handle, with a small turning radius and high cost performance. It is widely used in municipal administration, construction, oil fields, water conservancy, forestry, farms, and other fields.
The wheeled excavator loader can be used for excavating, carrying, and leveling, and can also be used flexibly and quickly for the scarp heap and waste residue of large and medium-sized enterprises. It is the ideal model for realizing multi-functional machinery.
Features:
- Increased cab with safety glass, bright and spacious.
- Working table, water temperature, oil temperature, current, can be seen clearly at a glance.
- Reasonable fuel tank, convenient to refuel.
- Using brand-name hydraulic parts, the main pump has a long life and high working efficiency.
- Adjustable seat, easy to use, comfortable.
- Hydraulic steering, easy to operate, convenient.
- Hydraulic walking system, using famous brand engine.
- Fully equipped with all the functions of small excavators and loaders.
- Predominant overall performance, with excellent operating efficiency.
- Can be equipped with a variety of optional parts to meet different user requirements.
Advantages:
- Compact and convenient to handle.
- Small turning radius, high cost performance.
- Wide range of applications.
- Excellent operating efficiency.
- Can be customized to meet different user requirements.
Applications:
- Municipal administration
- Construction
- Oil fields
- Water conservancy
- Forestry
- Farms
Conclusion:
The wheeled excavator loader is a versatile and efficient machine that can be used for a variety of tasks. It is ideal for businesses and organizations that need a machine that can do it all.
Packaging & Shipping
Packing & Delivery
Container 40HC 2 units can be installed
1.Standard packing, the machine body is without packing, but the machine will be well fastened and fixed in the container by wire rope.
2. spare parts or wearing parts will be packed in wooden box or paper carton.
3. Standard shipping method is by container.
Our Service
1. OEM order accepted: Customer’s brand, Color etc.
2. Spare parts in stock.
3. Factory visiting, third party inspection etc.
4. We will reply for your inquiry in 24 hours.
5. Purchasing agent for related machines.
FAQ
Q1. Are you a manufacturer or trader?
A: We are a manufacturer of construction machines which specilized in producing and exporting loaders including backhoe loaders ,wheel loaders and other construction Machinery .
Q2. What is your terms of payment?
A: A: T / T 30% as deposit in advance, Pay the final payment before shipment.
Q3. How about your delivery time?
A: Generally, it will take 30 days after deposite payment. The specific delivery time depends on the items and the quantity of your order. Sometimes we have some stock.
Q4. Do you test all your goods before delivery?
A: Yes, we have 100% test before delivery
Q5. What is your warranty policy?
A: We can supply 1 year or 2000h warranty for our machines and parts for free within warranty.
Client visit
production line
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| Certification: | TUV, ISO |
|---|---|
| Condition: | New |
| Rated Load: | 6-9t |
| Transmission: | Hydraulic – Mechanical |
| Load and Unload Mode: | Front Discharge |
| Walking Mode: | Wheeled |
Benefits of Regular Gearbox Maintenance
Regular maintenance of gearboxes offers numerous advantages:
- Extended Lifespan: Proper maintenance helps prevent premature wear and breakdown, increasing the gearbox’s overall lifespan.
- Reduced Downtime: Regular inspections and maintenance can identify issues early, minimizing unplanned downtime for repairs.
- Improved Efficiency: Well-maintained gearboxes operate more efficiently, leading to energy savings and optimized performance.
- Cost Savings: Routine maintenance reduces the need for costly major repairs or replacements.
- Enhanced Safety: Regular maintenance ensures safe operation by addressing potential hazards and malfunctions.
- Optimal Performance: Properly maintained gearboxes deliver consistent and reliable performance for machinery and equipment.
- Preserved Functionality: Maintenance prevents issues that could lead to reduced functionality or complete failure.
- Reduced Environmental Impact: Well-maintained gearboxes consume less energy and minimize waste, contributing to sustainability efforts.
- Compliance: Regular maintenance helps meet industry regulations and standards for equipment safety and performance.
Implementing a proactive maintenance plan can provide these benefits and contribute to the overall success of your machinery and operations.
editor by CX 2024-03-29
China Best Sales Tractor Rotary Mowers Bevel Tillers Pto Shaft Reducer Gearbox for Farm and Agricultural Machinery planetary gearbox
Product Description
Tractor Rotary Mowers Bevel Fertilizer Spreader Tillers Right Angle Pto Shaft Reducer Gearbox for Farm and Agricultural Machinery
Established in Nov.2002,HangZhou CHINAMFG is a professional manufacturer and supplier in supplying spare parts and accessories for agricultural machinery. In addition to the 3000 standards parts, we also offer our customers tailor-made articles or assemblies that are for special application.
HangZhou CHINAMFG focused on the development and production of gearboxes with a professional team and continue to learn advanced technology; the use of first-class equipment; high quality supply chain system, relying on these, the gearboxes get high reputation among customers at home and abroad.
These gearboxes are widely used in rotary tillers, lawn mowers, harvesters, hole diggers, pesticide sprayers, irrigation machines, fertilizer spreaders, blenders and so on. The main products are:
–Straight bevel gearbox
–Spiral bevel gearbox
–Planetary reducer
–Worm gearbox
HangZhou CHINAMFG International Trading Co.,Ltd is a modern enterprise specilizing in the development, production, sales and services of PTO shaft. We adhere to the principle of “Precise Driveline, Advocate Green”, using advanced technology and equipments to ensure all the technical standards of precise driveline. So that the transmission efficiency can be maxmized and every drop of resource of customers’ can be saved. Meanwhile, we have a customer-centric service system, providing a full range of pre-sale, sale and after-sale service. Customer satisfaction is our forever pursuit.
We follow the principle of people first, trying our best to set up a pleasant surroundings and platform of performance for each employee, so everyone can be self-consciously active to join in “Precise Driveline, Adocate Green” to embody the self-worth, enterprise value and social value.
Newnuro’s goal is: reducing customer’s purchase budget, support customers to earn more market.
Newnuro always finds solution for customers.Customer satisfaction is our ultimate goal and forever pursuit.
/* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| Application: | Machinery, Agricultural Machinery |
|---|---|
| Function: | Distribution Power, Change Drive Torque, Change Drive Direction, Speed Changing, Speed Reduction, Speed Increase |
| Layout: | Assembled |
| Hardness: | Hardened Tooth Surface |
| Installation: | Horizontal Type |
| Step: | Single-Step |
| Samples: |
US$ 50/Piece
1 Piece(Min.Order) | |
|---|
| Customization: |
Available
| Customized Request |
|---|
Common Problems with Gearboxes and How to Troubleshoot Them
Gearboxes can encounter various issues over time. Here are some common problems and troubleshooting steps:
- Noise and Vibration: Excessive noise or vibration may indicate misalignment, worn gears, or insufficient lubrication. Check alignment, inspect gears for wear, and ensure proper lubrication.
- Overheating: Overheating can be caused by high friction, inadequate lubrication, or overloading. Verify lubrication levels, reduce loads, and ensure proper ventilation.
- Leakage: Oil leaks may result from worn seals or gaskets. Inspect and replace damaged seals, and ensure proper sealing.
- Reduced Performance: Decreased performance could be due to worn gears, damaged bearings, or misalignment. Inspect components, replace damaged parts, and realign as needed.
- Gear Wear and Tooth Damage: Wear on gear teeth can result from excessive loads or poor lubrication. Replace worn gears and ensure proper lubrication.
- Shaft Misalignment: Shaft misalignment can lead to increased wear and noise. Realign shafts using precision measurement tools.
- Lubrication Issues: Inadequate or contaminated lubrication can cause premature wear. Regularly check and replace lubricant, and use the correct type for your gearbox.
- Bearing Failure: Bearing failure may result from overload, misalignment, or inadequate lubrication. Replace worn bearings and address underlying issues.
- Seal Damage: Damaged seals can lead to leaks and contamination. Replace seals and ensure proper installation.
- Gearbox Lockup: Gearbox lockup may occur due to foreign objects or damaged components. Disassemble and inspect the gearbox, removing any obstructions and replacing damaged parts.
Regular maintenance, proper lubrication, and timely troubleshooting are key to addressing gearbox problems and ensuring smooth operation.
editor by CX 2023-12-28
China Professional Agricultural Farm Machinery Gear Box Reducer Electric Motor Reduction Crops Corn and Rice Harvester Rear Drive Gearbox gearbox definition
Product Description
Agricultural Farm Machinery Gear Box Reducer Electric Motor Reduction Crops Corn and Rice Harvester Rear Drive Gearbox
GEAR MATERIALS
20CrMnTi/20CrMnMo for your choice
CASTINGS MATERIALS
Gray cast iron HT250 according to standard GB/T 1348-2009 Ductile iron QT450-10 according to standard GB/T 1348-2009 Cast steel ZG310-570 according to standard GB/T 5613-2014
SHAFTS MATERIALS
40Cr,45#,20CrMnTi,20CrMnMo for your choice according to your request.
POWER To ensure the correct use of the product we recommand to pay attention to the specifications mentioned on our technical sheet.Consider also the input rotation speed,the power input and the transmission ratios.Where the rotation or other working conditions are different,please contact LongQuan technical department.
LUBRICATION
The reducer is usually supplied without lubricant.The recommended quantity of lubricant is indicated on our catalogue and the first replaced must be done after 50-60 hours of running,then replaced after 600-800 working hours. The emptying of the gearbox should be made immediately after the working,with the oil still hot,in order to avoid the deposition of sludge.Check frequently the oil level and top up the oil whenever necessary.
Related Products
Factory
Extensive use for agricultural machines
Guarantee: High precision, high wear resistance, low noise, smooth and steady, high strength
Our factory
| Type: | Agricultural Gearbox |
|---|---|
| Usage: | Farmland Infrastructure, Agricultural Machine |
| Material: | Carbon Steel |
| Power Source: | Electricity |
| Weight: | OEM |
| After-sales Service: | Installation Guide |
| Samples: |
US$ 999/Piece
1 Piece(Min.Order) | |
|---|
What is a Gearbox and How Does It Work?
A gearbox is a mechanical device that transmits power and changes the speed or torque of a rotating input shaft to a different output shaft. It is commonly used in various machines and equipment to control the speed and direction of motion.
Here’s how a gearbox works:
- Input Shaft: The gearbox receives rotational energy from an input shaft connected to a power source, such as an electric motor or an engine.
- Gears: Inside the gearbox are a set of gears with different sizes. These gears mesh with each other, and their arrangement determines the gear ratio, which defines how many revolutions the output shaft will make for a given rotation of the input shaft.
- Output Shaft: The output shaft is connected to the machinery or equipment that needs to be powered. As the gears rotate, the motion and power are transmitted from the input shaft to the output shaft.
- Gear Ratio: By selecting different gear combinations, the gearbox can change the speed and torque of the output shaft. A higher gear ratio results in higher torque and lower speed, while a lower gear ratio provides higher speed and lower torque.
Gearboxes play a crucial role in various applications, including automobiles, industrial machinery, robotics, and more, enabling efficient power transmission and speed control.
editor by CX 2023-11-18
China best Speed up Gearbox Km7109 for Farm Tractor Front Loader gearbox definition
Product Description
Speed up Gearbox Km7109 for Farm Tractor Front Loader
The Gearboxes are designed for connecting gear pumps to farm tractor power take offs (PTO).Output speed of power take offs is 540rpm which can be compared with the proper running speeds of hydraulic pumps.Different input running speeds can also be suitable,provided that the PTO gearbox output speed does not exceed 3000 rpm.
Gears
Made in Steel CHINAMFG 18 PCR M03.Stub teeth guarantee very high resistance and run very quietly.
Shafts
Made in steel CHINAMFG 16 CRN4.They are coupled with splined gears and are designed to stand the torque values stated in the catalogue.
Lubrication
SAE 90 gear oil must be put in the pto gearbox prior to use, change the oil after the first 60-80 hours and then every 12 months or 1500 hours which ever falls first.
Maintenance
Please check the oil level via the special oil window every 50 hours.Working temperatures should not exceed 120 degrees celcius under continuos duty cycle.
Packaging & Shipping
Plastic bag packing for 1 piece / two pieces in 1 exporting carton / 100 cartons put on a pallet
FAQ
1.Q:Is your company a trading company or a manufacturer?
A:Our company is a trading company also a manufacturer, we have our own factory to produce gearbox, pump support..Etc
Also we distribute gear pumps, tractor machinery,dump truck pump from selected premium suppliers to meet customers’ variable demand.
2.Q:What about the quality control and warranty ?
A:”Quality first, Customers foremost”.Every piece of products is cheeked and tested strictly 1 by 1 before packing and shipping.
Our products have 1 year warranty, technical support is endless from us.
3.Q:Can you provide samples for checking and testing?
A:Yes,we provide free samples for checking the build quality and real performance of our products,the freight need to be coverd by customer.
4.Q:How can I get to your company?
A:Our company address is No.888 Huaxu Road,Xihu (West Lake) Dis. district,ZheJiang ,China
It is about 30 minutes by car from ZheJiang Xihu (West Lake) Dis.ao airport or ZheJiang Xihu (West Lake) Dis.ao Railway station.
| Application: | Machinery, Agricultural Machinery |
|---|---|
| Function: | Distribution Power, Speed Changing, Speed Increase |
| Layout: | Coaxial |
| Hardness: | Hardened Tooth Surface |
| Installation: | Horizontal Type |
| Step: | Single-Step |
| Samples: |
US$ 88/Piece
1 Piece(Min.Order) | |
|---|
| Customization: |
Available
| Customized Request |
|---|
Steps to Replace a Faulty Gearbox in an Automobile
Replacing a faulty gearbox in an automobile is a complex task that requires proper tools, skills, and safety precautions. Here are the general steps involved in the process:
- Prepare the Vehicle: Park the vehicle on a flat surface and engage the parking brake. Disconnect the battery to ensure safety during the procedure.
- Drain Fluids: Drain the transmission fluid from the old gearbox into a suitable container.
- Disconnect Components: Remove any components obstructing access to the gearbox, such as the driveshaft, exhaust system, and linkage.
- Suspend the Engine: If necessary, use an engine hoist or support to suspend the engine safely.
- Support the Gearbox: Use a transmission jack to support the weight of the gearbox.
- Remove Gearbox: Detach the gearbox from the engine by removing bolts and disconnecting the clutch or torque converter.
- Install New Gearbox: Position the new gearbox onto the engine and secure it in place with bolts.
- Reconnect Components: Reattach the driveshaft, exhaust system, and linkage that were disconnected earlier.
- Refill Fluids: Fill the new gearbox with the appropriate transmission fluid according to the manufacturer’s specifications.
- Lower Engine: Carefully lower the engine back into its original position if it was suspended.
- Test and Adjust: Start the vehicle and test the new gearbox for proper operation. Check for any leaks, unusual noises, or gear shifting issues.
- Final Check: Double-check all connections and ensure that all components are properly secured.
- Dispose of Old Fluid: Dispose of the old transmission fluid safely and responsibly.
- Dispose of Old Gearbox: Properly dispose of the old gearbox according to local regulations.
It’s important to note that gearbox replacement can vary significantly depending on the vehicle’s make and model. It’s recommended to consult the vehicle’s service manual or seek professional assistance if you’re not experienced in automotive repair.
editor by CX 2023-09-30
China 30HP 2Cylinder Engine Agricultural Farm Tractor 8F+2R Manual Small Transmission Gearbox with Reducer Gearbox sequential gearbox
Error:获取返回内容失败，
Your session has expired. Please reauthenticate.
Key Market Insights Related to Worm Reduction Gearboxes
A gearbox is a mechanical device that allows you to shift between different speeds or gears. It does so by using one or more clutches. Some gearboxes are single-clutch, while others use two clutches. You can even find a gearbox with closed bladders. These are also known as dual clutches and can shift gears more quickly than other types. Performance cars are designed with these types of gearboxes.
Backlash measurement
Gearbox backlash is a common component that can cause noise or other problems in a car. In fact, the beats and sets of gears in a gearbox are often excited by the oscillations of the engine torque. Noise from gearboxes can be significant, particularly in secondary shafts that engage output gears with a differential ring. To measure backlash and other dimensional variations, an operator can periodically take the output shaft’s motion and compare it to a known value.
A comparator measures the angular displacement between two gears and displays the results. In one method, a secondary shaft is disengaged from the gearbox and a control gauge is attached to its end. A threaded pin is used to secure the differential crown to the secondary shaft. The output pinion is engaged with the differential ring with the aid of a control gauge. The angular displacement of the secondary shaft is then measured by using the dimensions of the output pinion.
Backlash measurements are important to ensure the smooth rotation of meshed gears. There are various types of backlash, which are classified according to the type of gear used. The first type is called circumferential backlash, which is the length of the pitch circle around which the gear rotates to make contact. The second type, angular backlash, is defined as the maximum angle of movement between two meshed gears, which allows the other gear to move when the other gear is stationary.
The backlash measurement for gearbox is one of the most important tests in the manufacturing process. It is a criterion of tightness or looseness in a gear set, and too much backlash can jam a gear set, causing it to interface on the weaker part of its gear teeth. When backlash is too tight, it can lead to gears jamming under thermal expansion. On the other hand, too much backlash is bad for performance.
Worm reduction gearboxes
Worm reduction gearboxes are used in the production of many different kinds of machines, including steel and power plants. They are also used extensively in the sugar and paper industries. The company is constantly aiming to improve their products and services to remain competitive in the global marketplace. The following is a summary of key market insights related to this type of gearbox. This report will help you make informed business decisions. Read on to learn more about the advantages of this type of gearbox.
Compared to conventional gear sets, worm reduction gearboxes have few disadvantages. Worm gear reducers are commonly available and manufacturers have standardized their mounting dimensions. There are no unique requirements for shaft length, height, and diameter. This makes them a very versatile piece of equipment. You can choose to use one or combine several worm gear reducers to fit your specific application. And because they have standardized ratios, you will not have to worry about matching up multiple gears and determining which ones fit.
One of the primary disadvantages of worm reduction gearboxes is their reduced efficiency. Worm reduction gearboxes usually have a maximum reduction ratio of five to sixty. The higher-performance hypoid gears have an output speed of around ten to twelve revolutions. In these cases, the reduced ratios are lower than those with conventional gearing. Worm reduction gearboxes are generally more efficient than hypoid gear sets, but they still have a low efficiency.
The worm reduction gearboxes have many advantages over traditional gearboxes. They are simple to maintain and can work in a range of different applications. Because of their reduced speed, they are perfect for conveyor belt systems.
Worm reduction gearboxes with closed bladders
The worm and the gear mesh with each other in a combination of sliding and rolling movements. This sliding action is dominant at high reduction ratios, and the worm and gear are made of dissimilar metals, which results in friction and heat. This limits the efficiency of worm gears to around thirty to fifty percent. A softer material for the gear can be used to absorb shock loads during operation.
A normal gear changes its output independently once a sufficient load is applied. However, the backstop complicates the gear configuration. Worm gears require lubrication because of the sliding wear and friction introduced during movement. A common gear arrangement moves power at the peak load section of a tooth. The sliding happens at low speeds on either side of the apex and occurs at a low velocity.
Single-reduction gearboxes with closed bladders may not require a drain plug. The reservoir for a worm gear reducer is designed so that the gears are in constant contact with lubricant. However, the closed bladders will cause the worm gear to wear out more quickly, which can cause premature wear and increased energy consumption. In this case, the gears can be replaced.
Worm gears are commonly used for speed reduction applications. Unlike conventional gear sets, worm gears have higher reduction ratios. The number of gear teeth in the worm reduces the speed of a particular motor by a substantial amount. This makes worm gears an attractive option for hoisting applications. In addition to their increased efficiency, worm gears are compact and less prone to mechanical failure.
Shaft arrangement of a gearbox
The ray-diagram of a gearbox shows the arrangement of gears in the various shafts of the transmission. It also shows how the transmission produces different output speeds from a single speed. The ratios that represent the speed of the spindle are called the step ratio and the progression. A French engineer named Charles Renard introduced five basic series of gearbox speeds. The first series is the gear ratio and the second series is the reverse gear ratio.
The layout of the gear axle system in a gearbox relates to its speed ratio. In general, the speed ratio and the centre distance are coupled by the gear axles to form an efficient transmission. Other factors that may affect the layout of the gear axles include space constraints, the axial dimension, and the stressed equilibrium. In October 2009, the inventors of a manual transmission disclosed the invention as No. 2. These gears can be used to realize accurate gear ratios.
The input shaft 4 in the gear housing 16 is arranged radially with the gearbox output shaft. It drives the lubricating oil pump 2. The pump draws oil from a filter and container 21. It then delivers the lubricating oil into the rotation chamber 3. The chamber extends along the longitudinal direction of the gearbox input shaft 4, and it expands to its maximum diameter. The chamber is relatively large, due to a detent 43.
Different configurations of gearboxes are based on their mounting. The mounting of gearboxes to the driven equipment dictates the arrangement of shafts in the gearbox. In certain cases, space constraints also affect the shaft arrangement. This is the reason why the input shaft in a gearbox may be offset horizontally or vertically. However, the input shaft is hollow, so that it can be connected to lead through lines or clamping sets.
Mounting of a gearbox
In the mathematical model of a gearbox, the mounting is defined as the relationship between the input and output shafts. This is also known as the Rotational Mount. It is one of the most popular types of models used for drivetrain simulation. This model is a simplified form of the rotational mount, which can be used in a reduced drivetrain model with physical parameters. The parameters that define the rotational mount are the TaiOut and TaiIn of the input and output shaft. The Rotational Mount is used to model torques between these two shafts.
The proper mounting of a gearbox is crucial for the performance of the machine. If the gearbox is not aligned properly, it may result in excessive stress and wear. It may also result in malfunctioning of the associated device. Improper mounting also increases the chances of the gearbox overheating or failing to transfer torque. It is essential to ensure that you check the mounting tolerance of a gearbox before installing it in a vehicle.
editor by czh2023-02-14
China Agricultural Farm Machinery Parts Power Straight Bevel Gearbox for Rotary Tiller, Rotary Lawn Mower synchromesh gearbox
Product Description
Agricultural Farm Equipment Components Electrical power Straight Bevel Gearbox for Rotary Tiller,Rotary Garden Mower
Recognized in Nov.2002,HangZhou CZPT is a skilled producer and supplier in providing spare areas and equipment for agricultural equipment. In addition to the 3000 expectations components, we also supply our buyers tailor-produced content articles or assemblies that are for specific software.
HangZhou CZPT centered on the improvement and generation of gearboxes with a expert staff and proceed to understand advanced engineering the use of 1st-class tools substantial good quality source chain program, relying on these, the gearboxes get substantial track record among customers at house and abroad.
These gearboxes are broadly utilized in rotary tillers, garden mowers, harvesters, gap diggers, pesticide sprayers, irrigation devices, fertilizer spreaders, blenders and so on. The primary items are:
–Straight bevel gearbox
–Spiral bevel gearbox
–Planetary reducer
–Worm gearbox
HangZhou CZPT Intercontinental Investing Co.,Ltd is a modern day company specilizing in the improvement, manufacturing, revenue and solutions of PTO shaft. We adhere to the basic principle of “Specific Driveline, Advocate Environmentally friendly”, making use of superior technological innovation and equipments to make certain all the complex requirements of specific driveline. So that the transmission performance can be maxmized and every single fall of resource of customers’ can be saved. In the meantime, we have a customer-centric services program, delivering a total variety of pre-sale, sale and following-sale services. Buyer gratification is our without end pursuit.
We adhere to the principle of folks very first, attempting our ideal to set up a pleasant environment and system of performance for every staff, so everybody can be self-consciously active to join in “Exact Driveline, Adocate Inexperienced” to embody the self-worth, enterprise value and social value.
Newnuro’s goal is: lowering customer’s purchase spending budget, support buyers to make much more market place.
Newnuro usually finds remedy for customers.Client pleasure is our greatest objective and permanently pursuit.
|
US $70 / Piece | |
100 Pieces (Min. Order) |
###
| Application: | Motor, Machinery, Agricultural Machinery |
|---|---|
| Function: | Distribution Power, Change Drive Torque, Change Drive Direction, Speed Changing, Speed Reduction, Speed Increase |
| Layout: | Coaxial |
| Hardness: | Hardened Tooth Surface |
| Installation: | Vertical Type |
| Step: | Single-Step |
###
| Samples: |
US$ 70/Piece
1 Piece(Min.Order) |
|---|
###
| Customization: |
Available
|
|---|
|
US $70 / Piece | |
100 Pieces (Min. Order) |
###
| Application: | Motor, Machinery, Agricultural Machinery |
|---|---|
| Function: | Distribution Power, Change Drive Torque, Change Drive Direction, Speed Changing, Speed Reduction, Speed Increase |
| Layout: | Coaxial |
| Hardness: | Hardened Tooth Surface |
| Installation: | Vertical Type |
| Step: | Single-Step |
###
| Samples: |
US$ 70/Piece
1 Piece(Min.Order) |
|---|
###
| Customization: |
Available
|
|---|
Key Market Insights Related to Worm Reduction Gearboxes
A gearbox is a mechanical device that allows you to shift between different speeds or gears. It does so by using one or more clutches. Some gearboxes are single-clutch, while others use two clutches. You can even find a gearbox with closed bladders. These are also known as dual clutches and can shift gears more quickly than other types. Performance cars are designed with these types of gearboxes.
Backlash measurement
Gearbox backlash is a common component that can cause noise or other problems in a car. In fact, the beats and sets of gears in a gearbox are often excited by the oscillations of the engine torque. Noise from gearboxes can be significant, particularly in secondary shafts that engage output gears with a differential ring. To measure backlash and other dimensional variations, an operator can periodically take the output shaft’s motion and compare it to a known value.
A comparator measures the angular displacement between two gears and displays the results. In one method, a secondary shaft is disengaged from the gearbox and a control gauge is attached to its end. A threaded pin is used to secure the differential crown to the secondary shaft. The output pinion is engaged with the differential ring with the aid of a control gauge. The angular displacement of the secondary shaft is then measured by using the dimensions of the output pinion.
Backlash measurements are important to ensure the smooth rotation of meshed gears. There are various types of backlash, which are classified according to the type of gear used. The first type is called circumferential backlash, which is the length of the pitch circle around which the gear rotates to make contact. The second type, angular backlash, is defined as the maximum angle of movement between two meshed gears, which allows the other gear to move when the other gear is stationary.
The backlash measurement for gearbox is one of the most important tests in the manufacturing process. It is a criterion of tightness or looseness in a gear set, and too much backlash can jam a gear set, causing it to interface on the weaker part of its gear teeth. When backlash is too tight, it can lead to gears jamming under thermal expansion. On the other hand, too much backlash is bad for performance.
Worm reduction gearboxes
Worm reduction gearboxes are used in the production of many different kinds of machines, including steel and power plants. They are also used extensively in the sugar and paper industries. The company is constantly aiming to improve their products and services to remain competitive in the global marketplace. The following is a summary of key market insights related to this type of gearbox. This report will help you make informed business decisions. Read on to learn more about the advantages of this type of gearbox.
Compared to conventional gear sets, worm reduction gearboxes have few disadvantages. Worm gear reducers are commonly available and manufacturers have standardized their mounting dimensions. There are no unique requirements for shaft length, height, and diameter. This makes them a very versatile piece of equipment. You can choose to use one or combine several worm gear reducers to fit your specific application. And because they have standardized ratios, you will not have to worry about matching up multiple gears and determining which ones fit.
One of the primary disadvantages of worm reduction gearboxes is their reduced efficiency. Worm reduction gearboxes usually have a maximum reduction ratio of five to sixty. The higher-performance hypoid gears have an output speed of around ten to twelve revolutions. In these cases, the reduced ratios are lower than those with conventional gearing. Worm reduction gearboxes are generally more efficient than hypoid gear sets, but they still have a low efficiency.
The worm reduction gearboxes have many advantages over traditional gearboxes. They are simple to maintain and can work in a range of different applications. Because of their reduced speed, they are perfect for conveyor belt systems.
Worm reduction gearboxes with closed bladders
The worm and the gear mesh with each other in a combination of sliding and rolling movements. This sliding action is dominant at high reduction ratios, and the worm and gear are made of dissimilar metals, which results in friction and heat. This limits the efficiency of worm gears to around thirty to fifty percent. A softer material for the gear can be used to absorb shock loads during operation.
A normal gear changes its output independently once a sufficient load is applied. However, the backstop complicates the gear configuration. Worm gears require lubrication because of the sliding wear and friction introduced during movement. A common gear arrangement moves power at the peak load section of a tooth. The sliding happens at low speeds on either side of the apex and occurs at a low velocity.
Single-reduction gearboxes with closed bladders may not require a drain plug. The reservoir for a worm gear reducer is designed so that the gears are in constant contact with lubricant. However, the closed bladders will cause the worm gear to wear out more quickly, which can cause premature wear and increased energy consumption. In this case, the gears can be replaced.
Worm gears are commonly used for speed reduction applications. Unlike conventional gear sets, worm gears have higher reduction ratios. The number of gear teeth in the worm reduces the speed of a particular motor by a substantial amount. This makes worm gears an attractive option for hoisting applications. In addition to their increased efficiency, worm gears are compact and less prone to mechanical failure.
Shaft arrangement of a gearbox
The ray-diagram of a gearbox shows the arrangement of gears in the various shafts of the transmission. It also shows how the transmission produces different output speeds from a single speed. The ratios that represent the speed of the spindle are called the step ratio and the progression. A French engineer named Charles Renard introduced five basic series of gearbox speeds. The first series is the gear ratio and the second series is the reverse gear ratio.
The layout of the gear axle system in a gearbox relates to its speed ratio. In general, the speed ratio and the centre distance are coupled by the gear axles to form an efficient transmission. Other factors that may affect the layout of the gear axles include space constraints, the axial dimension, and the stressed equilibrium. In October 2009, the inventors of a manual transmission disclosed the invention as No. 2. These gears can be used to realize accurate gear ratios.
The input shaft 4 in the gear housing 16 is arranged radially with the gearbox output shaft. It drives the lubricating oil pump 2. The pump draws oil from a filter and container 21. It then delivers the lubricating oil into the rotation chamber 3. The chamber extends along the longitudinal direction of the gearbox input shaft 4, and it expands to its maximum diameter. The chamber is relatively large, due to a detent 43.
Different configurations of gearboxes are based on their mounting. The mounting of gearboxes to the driven equipment dictates the arrangement of shafts in the gearbox. In certain cases, space constraints also affect the shaft arrangement. This is the reason why the input shaft in a gearbox may be offset horizontally or vertically. However, the input shaft is hollow, so that it can be connected to lead through lines or clamping sets.
Mounting of a gearbox
In the mathematical model of a gearbox, the mounting is defined as the relationship between the input and output shafts. This is also known as the Rotational Mount. It is one of the most popular types of models used for drivetrain simulation. This model is a simplified form of the rotational mount, which can be used in a reduced drivetrain model with physical parameters. The parameters that define the rotational mount are the TaiOut and TaiIn of the input and output shaft. The Rotational Mount is used to model torques between these two shafts.
The proper mounting of a gearbox is crucial for the performance of the machine. If the gearbox is not aligned properly, it may result in excessive stress and wear. It may also result in malfunctioning of the associated device. Improper mounting also increases the chances of the gearbox overheating or failing to transfer torque. It is essential to ensure that you check the mounting tolerance of a gearbox before installing it in a vehicle.
editor by czh 2023-01-09
China Agriculture Machinery Gear Box Agricultural Agri Farm Tractor Rotary Mowers Bevel Digger Fertilizer Spreader Tillers Right Angle Pto Shaft Reducer Gearbox car gearbox
Item Description
WP Solid Shaft Worm Equipment Transmission Reducer Ruduction Gearbox
Features:
1. Compact composition and straightforward assembly
two. Wide pace ranges and high torque
3. Minimal sounds, great sealing performance, high efficiency
four. Stable and risk-free, long lifetime, common
five. Multi-framework, various assembling methods
Item image:
Specification:
| ANG WP Worm Pace Equipment Device | |
| Model | WPA WPS WPDA WPDS WPO WPX… |
| Size | forty-250(single phase) |
| Enter electricity | .12kw ~ 33kw |
| Input pace | 750rpm ~ 2000rpm |
| Reduction ratio | 1/10 ~ 1/60(one stage) |
| Enter motor | AC (1 section or 3 phase) / DC motor |
| Output torque | 6-6050Nm |
| Set up sort | Foot / Solid shaft / Hollow shaft… |
| Material of housing | Die-forged iron |
| Application | Meals Stuff, Ceramics, Chemical, Packing, Dyeing, Woodworking, Glass, and many others. |
FAQ
Q: Can you make the equipment device with customization?
A: Sure, we can customize for each your request, like flange, shaft, configuration, substance, and many others.
Q: Do you give samples?
A: Yes. Sample is accessible for testing.
Q: What is your MOQ?
A: It is 10pcs for the beginning of our company.
Q: What’s your guide time?
A: Common merchandise require 5-30days, a bit more time for personalized items.
Q: Do you give technological innovation support?
A: Yes. Our company have design and style and development crew, we can provide technological innovation assistance if you
need to have.
Q: How to ship to us?
A: It is available by air, or by sea, or by prepare.
Q: How to pay the funds?
A: T/T and L/C is chosen, with various forex, like USD, EUR, RMB, and so on.
Q: How can I know the merchandise is suited for me?
A: >1ST confirm drawing and specification >2nd test sample >3rd start mass production.
Q: Can I come to your business to go to?
A: Yes, you are welcome to go to us at any time.
Q: How shall we speak to you?
A: You can deliver inquiry right, and we will reply in 24 hours.
|
US $15-25 / Piece | |
1 Piece (Min. Order) |
###
|
Shipping Cost:
Estimated freight per unit. |
To be negotiated |
|---|
###
| Application: | Machinery |
|---|---|
| Hardness: | Hardened Tooth Surface |
| Installation: | Horizontal Type |
###
| Samples: |
US$ 50/Piece
1 Piece(Min.Order) |
|---|
###
| Customization: |
Available
|
|---|
###
| ANG WP Worm Speed Gear Unit | |
| Model | WPA WPS WPDA WPDS WPO WPX… |
| Size | 40-250(single stage) |
| Input power | 0.12kw ~ 33kw |
| Input speed | 750rpm ~ 2000rpm |
| Reduction ratio | 1/10 ~ 1/60(single stage) |
| Input motor | AC (1 phase or 3 phase) / DC motor |
| Output torque | 6-6050Nm |
| Install type | Foot / Solid shaft / Hollow shaft… |
| Material of housing | Die-cast iron |
| Application | Food Stuff, Ceramics, Chemical, Packing, Dyeing, Woodworking, Glass, etc. |
|
US $15-25 / Piece | |
1 Piece (Min. Order) |
###
|
Shipping Cost:
Estimated freight per unit. |
To be negotiated |
|---|
###
| Application: | Machinery |
|---|---|
| Hardness: | Hardened Tooth Surface |
| Installation: | Horizontal Type |
###
| Samples: |
US$ 50/Piece
1 Piece(Min.Order) |
|---|
###
| Customization: |
Available
|
|---|
###
| ANG WP Worm Speed Gear Unit | |
| Model | WPA WPS WPDA WPDS WPO WPX… |
| Size | 40-250(single stage) |
| Input power | 0.12kw ~ 33kw |
| Input speed | 750rpm ~ 2000rpm |
| Reduction ratio | 1/10 ~ 1/60(single stage) |
| Input motor | AC (1 phase or 3 phase) / DC motor |
| Output torque | 6-6050Nm |
| Install type | Foot / Solid shaft / Hollow shaft… |
| Material of housing | Die-cast iron |
| Application | Food Stuff, Ceramics, Chemical, Packing, Dyeing, Woodworking, Glass, etc. |
What Is a Gearbox?
A gearbox is the mechanical system of an automobile that allows a vehicle to change gear smoothly. This arrangement of gears is highly complex, which helps to provide a smooth gear change. In this article, we will explore some of the different types of gearboxes, including the Epicyclic gearbox, the Coaxial helical gearbox, and the Extruder helical gearing. These are three of the most common types of gearboxes used in automobiles.
Gearboxes
Gearboxes help drivers choose the appropriate gear for the conditions. A lower gear produces the least speed, while a higher gear gives the maximum torque. The number of gears used in a gearbox varies to meet different demands on the road and load. Short gearing provides maximum torque, while tall gearing offers higher top speeds. These features combine to improve the driveability of a vehicle. But what is a gearbox?
The gearbox has a slew of components, including the bearings and seals. Among these components is the gearbox, which is subjected to wear and tear due to metal-to-metal contact. As a result, gearboxes require close monitoring. Various tests are used to assess the condition of gears, such as corrosion and wear. Proactive tests emphasize wear, contamination, and oil condition. However, there are also proactive tests, such as the ferrous density test and the AN test, which monitor additive depletion and abnormal wear.
The separating force is a key factor for the design of a gearbox. The primary radial measurement point should be oriented to monitor normal forces. The secondary measurement point should be located in the opposite direction of rotation from the primary radial measurement point. The separating force generated by a helical gear set is called tangential force. The primary and secondary radial measurement points should be positioned so as to provide information about both normal and tangential forces.
Manual gearboxes are often manual. The driver can control the synchromesh by using a selector rod. This rod moves the synchromesh to engage the gear. Reverse gears are not synchromesh because they are used only when the vehicle is at a standstill. In older cars, the first gear often lacked synchromesh due to cost or lack of torque. Drivers could still use first gear with a double-declutch.
Coaxial helical gearbox
The R series rigid tooth flank helical gearbox features high versatility and good combination. They have a wide range of motor power and allow for fine classification of transmission ratios. The R series gearbox has several advantages, including high efficiency, long service life, and low vibration. This series of gearbox can be combined with a wide range of reducers and variators. Its size and high performance makes it an ideal choice for applications that require maximum torque and load transfer.
The main feature of a helical gearbox is that it presents a fixed velocity ratio, even if the center gaps are not perfectly set. This is sometimes referred to as the fundamental rule of gearing. A helical gearbox is similar to paper spur gears in terms of radial pitch, since the shafts in the helical gearbox cross at an angle. The center gap of a helical gearbox is the same for both the left and right-handed counterparts.
The EP Series is another popular model of a Coaxial helical gearbox. This series has high torque and a maximum reduction ratio of 25.6:1. It is an ideal choice for the plastic industry, and CZPT offers an extensive range of models. Their center distance ranges from 112 mm to 450 mm. The EP Series has several models with different center distances. In addition to high torque and efficiency, this gearbox has low noise and vibration, and it is easy to assemble and disassemble.
Another type of Coaxial helical gearboxes is the planetary gearbox. They have a high efficiency and power density. Unlike coaxial helical gearboxes, planetary gearboxes have an axis on the same direction as the output shaft. They are easy to integrate into existing drive trains. In addition, they are compact and easy to integrate with existing drive trains. For servo applications, they are another great choice.
Epicyclic gearbox
An epicyclic gearbox is a type of automatic gearbox used to drive cars. Its primary advantage is its compact design, and it is more reliable and efficient than manual gearboxes. It is comprised of a sun gear and two planetary gears, encased in a ring gear called the Annulus. This system is useful for drivers who need to shift gears frequently, as they will become tired if the gears are suddenly changed.
An epicyclic gearbox consists of three different types of gears: ring gear, sun gear, and annular ring gear. The ring gear is the outermost gear and has angular-cut teeth on its inner surface. It is used in conjunction with planetary gears to provide high-speed ratios to vehicles. The sun gear also reverses the direction of the output shaft. This helps reduce transmission error.
An epicyclic gearbox uses multiple planets to transfer power between the planets. This type of gearbox is lightweight and features a high power density. This gearbox has several benefits over a standard single-stage parallel axis gearbox, including multiple load paths, unequal load sharing, and phased meshing. Furthermore, epicyclic gearboxes require more complex transmission error optimisation than their counterparts, including more than one stage.
The objective of epicyclic gearbox research is to provide the lowest transmission error possible. The process includes an initial design and detailed specification. The system is defined by its load spectrum and required ratio. Deflections of the elastic mesh are calculated to understand their strength and how much energy the system can handle. Finally, micro-geometric corrections minimize transmission error. These improvements are crucial to the overall efficiency of an epicyclic gearbox.
Extruder helical gearing
The helix in an extruder helical gearing is fixed at an angle, enabling more interaction with the shaft in the same direction as it moves. As a result, the shaft and the bearing are in constant contact for a long period of time. Typically, extruder helical gearing is used in applications where there is low excitement, such as steel, rolling mills, conveyors, and the oil industry. The bevel gear train also plays a role in these applications.
The CZPT AEX extruder drive gear is specifically developed for this specific application. The gears are compact and lightweight and offer exceptional power density and a long service life. These extruder gears are highly reliable, and they can be used in a wide range of applications, including rubber processing, food production, and recycling plants. CZPT offers both standard and custom gearing for your extruder.
Another advantage of helical gearing is its versatility. Since the helical gearing teeth are inclined at a specific angle, they can be adjusted to meet the specific needs of a given application. These gears also have the advantage of eliminating noise and shock from straight teeth. Unlike other gearing types, they are able to achieve a wide range of loads, from small to large. These helical gears are very durable and are the best option for high-load applications.
In addition to this, asymmetric helical gears have increased flexibility, while asymmetrical helical gears have lower flexural stiffness. The ratio of teeth to the shaft has a positive effect on the strength of the gear. Furthermore, asymmetrical helical gears are easier to manufacture. But before you purchase your next extruder gear, make sure you know what you’re getting into.
1 speed gearbox
CZPT Group Components produces the one speed gearbox. It has the potential to make cars more efficient and environmentally friendly. The gear ratio of a car’s drivetrain is crucial for reaching maximum power and speed. Typically, a one-speed gearbox delivers a maximum of 200 hp. But the speed at which a car can reach this power must be high to get the full benefit from the electric motor. So, how can a one-speed gearbox improve the speed and torque of a car?
A one-speed gearbox is a mechanical device used to switch between second and third gears. It can include multiple gear sets, such as a shared middle gear for switching between second and third gears. It can also have an intermediate gear set that represents a switchable gear in both partial transmissions. The invention also includes a mechanism that makes it easier to change gears. The patent claims are detailed below. A typical one-speed gearbox may include two parts.
Generally, a one-speed gearbox will have up to seven forward gears, with each of these corresponding to a different speed. A one-speed gearbox can have five different gear sets and five different gear levels. It can have synchronized gear sets or last-shelf gear sets. In either case, the gears are arranged in a way that maximizes their efficiency. If the gears are placed on opposite sides of a car, the transmission may be a two-speed one.
CZPT Transmission specializes in the production of high-speed gearboxes. The company’s Milltronics HBM110XT gearbox machine is the perfect tool for this job. This machine has a large working table and a heavy-duty load capacity, making it a versatile option for many kinds of applications. There are also a wide variety of CZPT gearboxes for the automotive industry.
editor by czh 2022-12-09
China wholesaler Agricultural Farm Machinery Spreader Gearbox for Fertilizer Sprayers with Great quality
Merchandise Description
Agricultural farm machinery spreader Gearbox For Fertilizer Sprayers
one. Item Description
| MODEL |
INPUT Data | OUTPUT Knowledge | |||||
| Ratio | Highest Rpm | KW | HP-CV | N.M | N.M | R.P.M | |
| AC78845A/B | 1:1.93 | 800 | 30 | forty | 358 | 185 | 1544 |
| RC | 1:1.93 | 800 | 30 | forty | 358 | 185 | 1544 |
| RC5/BB60X | one:1.sixty nine | 800 | 37 | 50 | 440 | 260 | 1352 |
| AC78846A/B | one:1.ninety three | 540 | 55 | 75 | 972 | 504 | 1042 |
| 612619 | 1:1.ninety three | 540 | 74 | a hundred | 1308 | 678 | 1042 |
| 612666 | one:1.46 | 540 | seventy four | 100 | 1308 | 896 | 680 |
| BB84X | one:1.26 | 540 | sixty seven | ninety | 1184 | 940 | 680 |
| RC81-000-01 | 1:1.923 | 540 | 74 | one hundred | 1308 | 680 | 1038 |
| RC81-000-02 | one:1.forty six | 540 | seventy four | 100 | 1308 | 896 | 788 |
| 75356-192 | one:1.ninety two | 540 | ninety seven | a hundred thirty | 1715 | 893 | 1037 |
| 75356-146 | 1:1.46 | 540 | ninety seven | 130 | 1715 | 1175 | 788 |
| 74823-19 | one:1.87 | 540 | 97 | a hundred thirty | 1715 | 918 | 1009 |
| 74823-14 | 1:1.39 | 540 | 97 | one hundred thirty | 1715 | 1235 | 750 |
| GT40U.B | 3:one | 540 | forty four | sixty | 778 | 2334 | one hundred eighty |
| SF-one hundred | one:1 | 540 | 15 | twenty | 265 | 265 | 540 |
| MCT-100A1 | 7.5:1 | 540 | 29.5 | forty | 521 | 3912 | 72 |
| MCT-100A2 | 22.5:one | 540 | 29.five | 40 | 521 | 11738 | 24 |
| DCR1-0000 | two.4:one | 540 | 37 | 50 | 654 | 1570 | 225 |
two. More Goods
three. The Drawing Of Gear Box
4. Creation and Packing
5.Shipping
six.Our Firm
HangZhou CZPT Tech.Machinery Co.,Ltd was founded in 2003. It is found at HangZhou County, HangZhou Metropolis, shut to 204 National Road.Our principal merchandise: 1. all varieties of drive shaft 2.all sorts of gera box 3. Farm equipment: IMT500 inorganic fertilizer spreader, HMT05S organic fertilizer spreader, 3M rotovator , 3M wet-paddy subject rotary, King 185 deep cultviating machine and so on. 4.The equipment components: a lot of kinds of Equipment, Shaft, Flang, ,Gear box, Laser areas, Stamping areas and so on.
7. FAQ
1. Q: Are your items forged or solid?
A: All of our goods are forged.
2. Q: What is your MOQ?
A: twenty PCS for each type. We acknowledge the sample buy.
3. Q: What is the horse electrical power of the pto shaft are available?
A: We give a complete variety of pto shaft, ranging from 16HP-200HP.
four. Q: How many splined specification do you have ?
A: We produce 1 1/8″-Z6, 1 3/8″-Z6, 1 3/4″-Z6, 1 3/8″- Z21, 1 3/4″-Z20, 8X42X48X8 and 8X32X38X6 splines.
five. Q: How about the guarantee?
A: We ensure 1 year warranty. With quality issues, we will deliver you the new goods for free of charge in up coming cargo.
six. Q: What is actually your payment terms?
A: T/T, L/C, D/A, D/P….
seven. Q: What is the shipping and delivery time?
A: 40 days right after obtaining your advanced deposit.
Gear reducers, also referred to as reducers, arrive in many transmission styles and are developed to multiply torque and minimize enter speed to a preferred output velocity. The main gain of inline gearboxes is their capacity to maintain control in programs involving large rotational speeds. Their efficiency and potential to offer large input speeds with minimal backlash make inline reducer gearboxes best for a extensive range of movement management programs
Gearboxes can be utilized in different fields of thorough processing, agriculture, chemical processing, oil and gas, electricity transmission and distribution techniques, logistics, warehousing and other industries. Equipment reducers are usually used the place increased torque and/or reduce rotational speeds are required, or if electricity needs to be transmitted at alternating angles, these kinds of as in right-angle motors. It can also adjust the route of rotation, as nicely as clockwise and counterclockwise. EP offers a total selection of gear reducers with right angle worms and high effectiveness possibilities. Electric powered Gear Aluminum items are a lightweight and resilient alternative to present day solid iron and metal versions and can be stocked or customized created to your precise specifications. EP gearboxes are lightweight and resilient, aluminum worm gearboxes are made for tight areas, such as challenging-to-put in OEM designs as well as cell equipment. Eccentric reducers are available as compact aluminum or solid iron inline reducers with seal lifestyle ratings from 15HP (aluminum) to 40HP (solid iron). In addition to our standard and modified normal goods, our engineers will operate with you to style and construct customized solutions for numerous push technologies to match your application needs.
China manufacturer Agricultural Farm Machinery Parts Gearbox for Rotary Tiller with high quality
Item Description
agricultural farm equipment elements Gearbox For Rotary Tiller
1. Product Description
| MODEL |
INPUT Data | OUTPUT Information | |||||
| Ratio | Maximum Rpm | KW | HP-CV | N.M | N.M | R.P.M | |
| AC78845A/B | 1:1.93 | 800 | 30 | 40 | 358 | 185 | 1544 |
| RC | one:1.ninety three | 800 | thirty | 40 | 358 | 185 | 1544 |
| RC5/BB60X | 1:1.69 | 800 | 37 | fifty | 440 | 260 | 1352 |
| AC78846A/B | one:1.ninety three | 540 | 55 | seventy five | 972 | 504 | 1042 |
| 612619 | one:1.93 | 540 | 74 | a hundred | 1308 | 678 | 1042 |
| 612666 | 1:1.46 | 540 | 74 | 100 | 1308 | 896 | 680 |
| BB84X | one:1.26 | 540 | sixty seven | ninety | 1184 | 940 | 680 |
| RC81-000-01 | 1:1.923 | 540 | seventy four | one hundred | 1308 | 680 | 1038 |
| RC81-000-02 | one:1.46 | 540 | 74 | a hundred | 1308 | 896 | 788 |
| 75356-192 | 1:1.92 | 540 | 97 | one hundred thirty | 1715 | 893 | 1037 |
| 75356-146 | one:1.forty six | 540 | ninety seven | a hundred thirty | 1715 | 1175 | 788 |
| 74823-19 | one:1.87 | 540 | 97 | one hundred thirty | 1715 | 918 | 1009 |
| 74823-14 | one:1.39 | 540 | ninety seven | 130 | 1715 | 1235 | 750 |
| GT40U.B | three:1 | 540 | forty four | sixty | 778 | 2334 | a hundred and eighty |
| SF-100 | one:one | 540 | fifteen | twenty | 265 | 265 | 540 |
| MCT-100A1 | 7.5:one | 540 | 29.five | forty | 521 | 3912 | seventy two |
| MCT-100A2 | 22.5:one | 540 | 29.five | forty | 521 | 11738 | 24 |
| DCR1-0000 | two.4:1 | 540 | 37 | 50 | 654 | 1570 | 225 |
2. More Goods
3. The Drawing Of Equipment Box
four. Production and Packing
5.Transport
6.Our Firm
HangZhou CZPT Tech.Equipment Co.,Ltd was founded in 2003. It is located at HangZhou County, HangZhou City, shut to 204 Countrywide Street.Our main products: 1. all sorts of drive shaft 2.all types of gera box 3. Farm machinery: IMT500 inorganic fertilizer spreader, HMT05S organic fertilizer spreader, 3M rotovator , 3M soaked-paddy field rotary, King 185 deep cultviating machine and so on. 4.The machinery areas: several sorts of Gear, Shaft, Flang, ,Gear box, Laser areas, Stamping elements and so on.
7. FAQ
one. Q: Are your goods forged or cast?
A: All of our goods are solid.
2. Q: What is actually your MOQ?
A: twenty PCS for every sort. We take the sample purchase.
3. Q: What is actually the horse electrical power of the pto shaft are available?
A: We provide a total range of pto shaft, ranging from 16HP-200HP.
four. Q: How a lot of splined specification do you have ?
A: We create 1 1/8″-Z6, 1 3/8″-Z6, 1 3/4″-Z6, 1 3/8″- Z21, 1 3/4″-Z20, 8X42X48X8 and 8X32X38X6 splines.
five. Q: How about the guarantee?
A: We assure 1 calendar year warranty. With quality issues, we will deliver you the new products for free of charge in next shipment.
six. Q: What is actually your payment conditions?
A: T/T, L/C, D/A, D/P….
seven. Q: What is the shipping and delivery time?
A: forty days soon after obtaining your innovative deposit.
Underneath is a checklist of our currently offered industrial gearboxes. If you can not locate what you are looking for, remember to speak to the factory for a lot more alternatives. At EP, we are constantly establishing new products and retrofitting outdated types to meet client needs.
Gearboxes are mechanical products that assist travel programs keep optimum speed and torque for apps. Also identified as gearboxes and equipment drives, they decrease the rotational velocity of the enter shaft by a specified proportion and enhance the electrical power delivered to the output shaft by the same percentage. Ratio multipliers increase the deceleration and torque offered by the reducer by a particular ratio and are suitable for parallel installations. Mounting bases, torque arms and flange couplings are accessories utilised with the reducer. They are typically utilized in applications exactly where the reducer is not immediately connected to the push system.
China OEM Agricultural Animal Husbandry Tmr Feeder Mixer or Biogas Plant Mixer Gearbox for Poultry Feeding Farm Equipment near me factory
Item Description
Agricultural Animal Husbandry Tmr Feeder Mixer or Biogas Plant Mixer Gearbox for Poultry Feeding Farm Products
Gear Components
20CrMnTi/20CrMnMo for your choice
CASTINGS Components
Gray cast iron HT250 according to normal GB/T 1348-2009 Ductile iron QT450-10 according to common GB/T 1348-2009 Forged metal ZG310-570 according to regular GB/T 5613-2014
SHAFTS Components
40Cr,45#,20CrMnTi,20CrMnMo for your decision according to your request.
Electricity To ensure the appropriate use of the solution we recommand to shell out interest to the requirements mentioned on our complex sheet.Think about also the input rotation pace,the electricity enter and the transmission ratios.In which the rotation or other operating problems are diverse,you should speak to LongQuan complex section.
LUBRICATION
The reducer is generally equipped CZPT lubricant.The suggested quantity of CZPT is indicated on our catalogue and the 1st changed should be done soon after fifty-sixty hrs of managing,then changed after 600-800 functioning hrs. The emptying of the gearbox should be created instantly after the functioning,with the oil even now scorching,in buy to avoid the deposition of sludge.Examine regularly the oil degree and best up the oil each time essential.
Associated Items
Manufacturing unit
Substantial use for agricultural devices
Ensure: Large precision, higher use resistance, reduced noise, sleek and steady, high energy
Our manufacturing facility
Beneath is a list of our currently obtainable industrial gearboxes. If you can’t discover what you are looking for, you should make contact with the factory for far more choices. At EP, we are continually establishing new goods and retrofitting outdated kinds to fulfill customer requirements.
Gearboxes are mechanical units that assist travel programs preserve ideal speed and torque for programs. Also known as gearboxes and gear drives, they minimize the rotational speed of the enter shaft by a certain proportion and increase the energy shipped to the output shaft by the exact same percentage. Ratio multipliers enhance the deceleration and torque provided by the reducer by a particular ratio and are ideal for parallel installations. Mounting bases, torque arms and flange couplings are components used with the reducer. They are usually utilised in purposes the place the reducer is not right connected to the travel system.